Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Bruno, CA | Framework Contractors
We provide independent CGI cabinet and kitchen construction service across San Bruno, including full kitchen remodels, cabinet installation and refacing, and quartz and granite countertop work. The thing that makes our CGI work here different is simple: San Bruno sits on the San Andreas Fault, and most of the 1940s-1960s ranch homes we open up need shear-wall and foundation work before any new cabinet ever gets hung. Call (844) 681-3590 to schedule a free estimate with the team at Framework Contractors.
Why San Bruno Residents Choose Us for CGI Service
CGI cabinetry shows up in a lot of Peninsula remodels, and we have installed and serviced it for years across San Bruno’s post-war housing stock and hillside infill homes. Noel Carbajal, our owner, got his start in construction the old way: weekends helping an uncle patch stucco and reroof porches, then formal training through Santiago Canyon College’s Construction Technology program. That background matters when a 1958 ranch in San Bruno needs its original melamine cabinets pulled, the cripple walls bolted, and a new CGI sales & service install done right down to the soft-close adjustment. We are an independent contractor, not a CGI showroom or authorized dealer, which means we give you straight answers about repair versus replacement. We carry OEM-compatible hinges, glides, and touch-up finishes, and we know which CGI lines hold up on the damp west side of town.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Bruno
- Swollen toe kicks and delaminating bases from slab moisture. Foggy San Bruno summers and wet winters push moisture through slab-on-grade floors. Older CGI particleboard-core cabinets wick that moisture and the toe kicks swell or the bottom edges crumble. We see this constantly in 1950s ranch homes near San Bruno Avenue and in the Rollingwood area.
- Soft-close hinge failures after repeated humidity swings. CGI soft-close hinges generally last 5-7 years, but San Bruno’s damp winters followed by dry Santa Ana-influenced spells cause the adjustment screws to back off and doors to sag. We replace the hinge, reset the reveal, and the door closes correctly again.
- Stapled drawer boxes separating at the joints. Older CGI lines used stapled drawer construction. In hillside homes on the west side of San Bruno, where minor seismic movement is a recurring fact, heavy cookware works those joints loose. We rebuild or replace the drawer boxes with sturdier joinery.
- Melamine boxes failing against exterior walls without vapor barriers. If a CGI cabinet was installed directly against a bay-facing exterior wall without proper moisture protection, the bottom edges swell and delaminate. San Bruno’s marine-cooled climate makes this a known failure mode, not a rare one.
- Out-of-production lines with no easy OEM parts source. Some older CGI series have been discontinued. We source quality aftermarket equivalents that meet or exceed the original specs so the cabinet keeps working without breaking the remodel budget.
CGI Service in San Bruno: What Local Conditions Mean for Your Equipment
Here is the piece of local knowledge that changes how we approach CGI work in San Bruno: the city has an active fault mapped through town, and the USGS designates significant hillside areas as liquefaction- and landslide-prone. What that means in practical terms is that a kitchen remodel that moves a wall, opens a load-bearing span, or adds an island in San Bruno often triggers a seismic retrofit requirement: shear-wall upgrades, foundation bolting, and sometimes geotechnical review before the city signs off on the permit. Flatland Peninsula cities like CGI service in Millbrae or Burlingame rarely enforce that for an interior remodel. We plan for it from the start, so your CGI cabinet installation does not get stalled at inspection. On a 1950s ranch in the Rollingwood neighborhood, we opened up a cramped kitchen and found the original CGI melamine cabinets had swollen toe kicks from years of foggy-morning moisture wicking up the slab. We replaced the bases with CGI’s Advantage Series plywood boxes, added a continuous vapor barrier, topped them with a Cambria quartz island, then bolted the surrounding cripple walls to meet San Bruno’s seismic retrofit requirements. Build it right the first time; the second time costs twice as much and nobody’s happy.
CGI Models & Products We Service in San Bruno
We work on CGI’s Advantage Series full-overlay plywood boxes, the ProSeries semi-custom line with soft-close doors, and the ValueLine melamine-faced frameless cabinets. For San Bruno customers, we stock the common replacement parts locally: hinges, drawer glides, and touch-up kits for current Advantage and ProSeries runs. For discontinued lines, we source aftermarket equivalents that meet or exceed original specs. We will tell you honestly when a repair makes sense versus a replacement, based on the condition of the boxes and the parts cost.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Bruno
What you pay depends on scope, the condition of the existing structure, and whether San Bruno General Contractor seismic retrofit work is required. Here are the ranges we work within for typical San Bruno CGI kitchen and cabinet projects:
| Service | Price Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every estimate is free and comes as a written line-item quote. We walk the site, check the floor for moisture, look at what the city will require for permit inspection, and then give you numbers you can actually plan around. Call (844) 681-3590 to schedule yours.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Bruno
Do I need a seismic retrofit if I’m just remodeling my kitchen with new CGI cabinets? It depends on scope. If you are only replacing cabinets in the same layout, typically no retrofit is triggered. If you move walls, remove load-bearing structure, or add an island, San Bruno’s fault-adjacent building requirements often require shear-wall upgrades and foundation bolting. We check with the city before we demo so there are no surprises. Call (844) 681-3590 and we will walk your project with you.
How do I know if my CGI cabinets can be refaced instead of replaced? We look at the boxes first. If the plywood or melamine boxes are square, dry, and the hinges seat correctly, refacing with new doors and drawer fronts is usually the smarter spend. If the boxes are swollen, delaminated, or the drawer joints have separated, replacement wins. We give you that assessment in plain English, no salesman pressure. Call (844) 681-3590 for a free look.
Can you match my existing CGI cabinet finish if I only need a few new cabinets? Usually, yes, on current Advantage Series and ProSeries lines. We order finish-matched doors and panels where the manufacturer still offers them, and use CGI touch-up kits to blend seams. On discontinued finishes, we work with a local finishing shop to get as close as physically possible and will show you samples before ordering.
Why do my CGI cabinet doors stick in the winter? San Bruno winters bring damp, marine air, and wood or composite cabinet doors absorb some of that moisture, which makes them swell slightly and stick against the frame. The fix is usually a hinge adjustment or a slight door edge shave. It is not a sign the cabinet is failing, but it is worth checking so the hinges do not get overstressed. Call (844) 681-3590 and we will take a look.
Does installing CGI cabinets in a hillside home require special foundation work? Often, yes. Hillside homes in western San Bruno are mapped in landslide-prone zones, so any project that changes floor load or wall structure can trigger geotechnical review and foundation anchoring. We coordinate that with the engineer and the city so your cabinet installation is not holding up a permit. Call (844) 681-3590 for guidance on your specific lot.
Service Areas Near San Bruno
We also serve the surrounding Peninsula and South Bay communities. If you are in South San Francisco, our CGI service in South San Francisco crew covers the same CGI product lines. Brisbane homeowners can reach us through our CGI service in Brisbane page. And we work across the broader San Bruno service area, including the Rollingwood, Crestmoor, and downtown neighborhoods.
Book Your CGI Service in San Bruno Today
If your CGI cabinets need repair, refacing, or a full kitchen rebuild, call (844) 681-3590. We will schedule a free estimate for our Home Remodeling in San Bruno, walk the site, and give you a written plan for the work. San Bruno kitchens have their own set of rules, and we know them.
Written by Noel Carbajal, Owner at Framework Contractors, serving San Bruno since day one.