Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Pacifica, CA | Framework Contractors
We provide independent CGI cabinet installation, remodeling, and repair across Pacifica, and the one thing that makes our work here different is this: we plan every CGI project around fog, salt air, and hillside movement before the first box is ordered. We are not a CGI dealer or authorized service center, just a licensed general contractor who has worked with these cabinets in enough Pacifica kitchens to know where they fail and when they’ll last. If you’re pricing CGI cabinetry for a Pacifica remodel or need existing CGI boxes repaired, call us at (844) 681-3590 for a free estimate.
Why Pacifica Residents Choose Us for CGI Service
We know CGI’s Ready-to-Assemble all-plywood line, their unfinished and prefinished oak and maple series, and their bathroom vanity and linen cabinet boxes well enough to tell you which one belongs in a damp coastal kitchen and which one will fight you in five years. Noel Carbajal, our owner, spent his early years patching stucco and reroofing porches with his uncle before formal training at Santiago Canyon College, and he’s carried that hands-on approach into every Pacifica cabinet job we take. We’re an independent contractor, not manufacturer-affiliated, so our recommendation is based on what works in your house rather than what moves a product line. That means OEM CGI hinges and slides when they’re available, and better aftermarket hardware when the stock parts won’t survive Pacifica’s salt-laden air.
Styles & brands we work with
Common CGI Construction Problems We Solve in Pacifica
Here’s what we see repeatedly in Pacifica kitchens and baths, and how it ties back to local conditions:
- Thermofoil and melamine delamination. CGI thermofoil faces peel at bottom rails and around sinks when Pacifica’s near-constant marine fog drives interior humidity up and the cabinet surface expands and contracts through the seasons. Once the foil lifts, it doesn’t reseal, and the box underneath starts absorbing moisture.
- Corroded hinges and seized drawer slides. On older CGI installs, the steel fasteners and slides rust where salt-laden onshore wind pushes damp air through poorly flashed exterior walls. We replace them with soft-close hardware that’s rated for high-humidity environments, which standard OEM parts often aren’t.
- Swollen particleboard at toe kicks and sink bases. Winter rain in Pacifica finds its way through failed deck flashing above downslope kitchens or gaps in exterior walls, and CGI boxes with particleboard cores soak it up and crumble. We see this most often on bluffside and canyon lots where water moves downhill toward the house.
- Racked frames in out-of-square openings. Mid-century Pacifica homes settle, and when they do, the opening your 1960s redwood-sheathed kitchen presents is rarely square. Forcing CGI boxes into that opening torques the frames, so doors rack and reveal lines drift after installation.
- Failed toe-kick seals leading to subfloor rot. On downslope Pacifica lots with cantilevered decks and older additions, water that gets past a CGI cabinet’s toe kick often means the subfloor beneath has been wet for years. We don’t just swap the cabinet; we find where the water came from first.
CGI Service in Pacifica: What Local Conditions Mean for Your Equipment
Pacifica is a fog-belt coastal town built on unstable marine terrace bluffs and steep ravines, so construction here is dominated by geotechnical and drainage work, and every project trades against salt air, fog, and Coastal Commission-grade setback and erosion rules. For CGI cabinet owners, that means a kitchen remodel that shifts an exterior wall or adds a bump-out on a bluffside lot can require city coastal review before cabinets are even ordered, a step inland contractors never think about. We confirm the wall line and any setback constraint before templating a single CGI box, because ordering cabinets first and discovering a coastal review later means storing boxes in your garage for months. On the bluffside streets off the coast highway, contractors regularly find 1950s redwood decks and retaining walls that look fine from above but have rotted posts and backfilled soil pushing them downhill, and the same water that rots those posts wicks into kitchens and cabinets if the flashing was ever done wrong. Noel puts it plainly: “Build it right the first time, the second time costs twice as much and nobody’s happy.”
CGI Models & Products We Service in Pacifica
We install and service CGI Ready-to-Assemble all-plywood cabinet lines, unfinished and prefinished oak and maple series, bathroom vanity and linen cabinet lines, and melamine and thermofoil cabinet boxes. When repair makes sense, we use CGI OEM hinges, slides, and replacement fronts where they’re still available. When OEM parts are discontinued or under-spec for a damp coastal install, we substitute quality aftermarket hardware like Blum-style soft-close slides and hinges. That’s the difference between a parts-swapper and a contractor who knows Pacifica: we’ll stock what actually holds up here, not just what the catalog says comes with the box. If you’re planning a full or partial kitchen remodel around CGI, we can walk you through which cabinet series makes sense for your specific house, from a fog-exposed west-facing kitchen to a drier interior bath. See CGI sales & service for details on the lines we cover.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Pacifica
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the cost in Pacifica specifically is whether we’re fixing a wet wall or rotted subfloor before cabinets go in, whether the opening needs reframing for out-of-square settlement, and whether a coastal review applies to the wall line. Our free estimate is a written line-item quote, not a ballpark. Call (844) 681-3590 and we’ll come look at the actual site conditions, which is the only honest way to price a Pacifica CGI job.
Serving Pacifica, CA — Our Local Coverage Area
We’re a Pacifica General Contractor and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Pacifica
Peeling thermofoil can sometimes be re-adhered temporarily, but in Pacifica’s humid marine air, the underlying MDF or particleboard has usually already swollen, and once that happens, the door is done. We’ll replace individual doors and drawer fronts where the boxes are still sound, and recommend full replacement when the boxes themselves are compromised. Call (844) 681-3590 for a free evaluation, and we’ll tell you straight which route makes sense.
Yes, and this is the one that surprises people. A kitchen remodel that shifts an exterior wall or adds a bump-out on a bluffside Pacifica lot can trigger city coastal review before you order cabinets, and we confirm the wall line and setback constraint before we template anything. We’ve pulled permits and passed inspections on enough of these to know exactly where the line is. Call (844) 681-3590 and we’ll check your lot’s status early in the process.
Salt-laden onshore wind and fog are driving moisture through your exterior walls, and if the flashing was never done right, that moisture settles in the cabinet hardware. We replace stock CGI steel hinges and slides with CGI service in San Bruno corrosion-resistant soft-close hardware, and more importantly, we find and fix the flashing gap so the problem doesn’t come back in 18 months.
They can, but not by forcing them. We reframe out-of-square openings, shim and scribe faces to the actual wall line, and address any floor slope that would throw off reveal lines. On a recent CGI repair in Broadmoor bluffside job off the coast highway, we pulled a 1960s CGI oak cabinet run in a redwood-sided kitchen and found swollen particleboard toe kicks and rusted slides where winter rain had been wicking through failed flashing. We reframed the opening, re-flashed the exterior wall, and set new all-plywood CGI boxes with soft-close aftermarket hardware and quartz counters, all while keeping the wall line inside the existing setback so no coastal review was triggered.
Winter rain finds gaps in failed deck flashing above downslope lots or in the exterior wall behind the sink base, and particleboard-core CGI boxes soak that water up and crumble at the toe kick. If the base has swelled, CGI repair in South San Francisco replacement is usually the only honest fix, and we’ll also trace the water source so the new cabinet doesn’t inherit the same problem. An exact quote takes a site visit, and estimates are free at (844) 681-3590.
Service Areas Near Pacifica
We serve Pacifica and the surrounding coastal and bay-side communities. Our Pacifica service area covers the full 94044 ZIP, including the bluffside streets and ravine lots where drainage and setback issues run deep. For clients just north, we offer CGI service in Visitacion Valley, and for those a bit east, CGI service in Colma. That covers the fog belt and the transition zone where coastal conditions start to ease.
Book Your CGI Service in Pacifica Today
If you’re planning a CGI kitchen or bath in Pacifica, or you’ve got existing CGI cabinets that are failing, call (844) 681-3590. We’ll schedule a free on-site estimate, check your wall lines and setback status, and give you a written line-item quote before any work starts.
Written by Noel Carbajal, Owner at Framework Contractors, serving Pacifica since 2008.