Mr-Glass Construction in San Bruno, CA

Mr-Glass Construction in San Bruno, CA | Framework Contractors

We provide independent Mr-Glass shower enclosure, mirror, and glass door service across San Bruno, and what makes our work here different comes down to one thing: this city sits on a mapped earthquake fault, so glass enclosures in San Bruno bathrooms almost always go in alongside seismic retrofits, not before them. We measure, template, and set Mr-Glass glass ourselves, carry OEM hardware when it’s available, and switch to proven aftermarket parts when a series has been discontinued. If you own a Mr-Glass shower or bath enclosure in San Bruno, call (844) 681-3590 for a free estimate on repair, re-seal, or full replacement.

Call (844) 681-3590

Why San Bruno Residents Choose Us for Mr-Glass Service

We’ve worked Mr-Glass frameless pivots, sliding bypass doors, and semi-frameless hinged units into San Bruno bathrooms for years, and that reps-count matters when the hardware starts to fail. The damp marine air off the bay and the fog that hangs over the 94066 zip code put real stress on rollers, pivot hinges, and sealant beads. We know which Mr-Glass series used which hinge geometry, which sweeps actually fit which channel, and when a roller set needs OEM hardware versus when a quality aftermarket kit will outlast the original. Noel Carbajal, our owner, spent his early years patching stucco and reroofing porches with his uncle before studying Construction Technology at Santiago Canyon College, and he’s carried that training into every glass panel and hinge set we touch. We’re not manufacturer authorized, and we don’t pretend to be. We’re the contractor who actually sets the glass, squares the opening, and stands behind the install.

Common Mr-Glass Construction Problems We Solve in San Bruno

• Sliding bypass doors that jump the track. San Bruno’s bay-facing damp and the temperature swings between foggy mornings and afternoon sun cause roller axles to wear unevenly. Off-brand replacement rollers often bind within months because the wheel profile doesn’t match the original Mr-Glass track. We match the roller to the track, not just to the door panel.
• Mildewed sweeps and failing clear sealant on pivot enclosures. The marine-cooled, damp winters in San Bruno shrink vinyl sweeps and break down clear sealant beads faster than inland Peninsula cities see. Water wicks behind the curb, stains the tile, and rots the threshold. We strip the old bead, correct the curb pitch if needed, and re-seal with a product built for wet, cool conditions.
• Panels twisted on out-of-plumb post-WWII ranch bath walls. A lot of San Bruno’s 1940s and 1950s single-family ranch homes have bath walls that have moved over the decades. The glass is fine; the wall and hinge alignment aren’t. We shim and set hinges true before hanging the panel, so the door doesn’t swing open on its own or drag across the tile.
• Failing hinge bushings and dulled finishes on older semi-frameless units. Dulled anodized or chrome framing, worn bushings, and discontinued frame profiles make like-for-like parts hard to source. We repair what’s repairable, switch to quality aftermarket hardware when the original series is gone, and tell you plainly when a new panel is the cheaper fix over time.
• Enclosures templated before seismic retrofit work settled. This is a San Bruno-specific problem. On the Skyline side of town especially, bath walls get opened for shear-wall retrofits and foundation bolting, and a glass enclosure measured before that structural work settles will never sit right. We template after the retrofit is done, never before.

Mr-Glass Service in San Bruno: What Local Conditions Mean for Your Equipment

San Bruno is one of the few Peninsula cities with a mapped earthquake fault actually running through town, and USGS maps show the hillsides as liquefaction- and landslide-prone. That changes the sequence of a bathroom remodel. A homeowner in Millbrae or Burlingame can often go straight from demo to tile to glass. In San Bruno, the project frequently opens with geotechnical reports and seismic retrofitting: foundation bolting, new shear walls, blocking between studs. The bath wall gets opened, the house gets stitched back together, and only then does the opening get measured for a Mr-Glass enclosure. On a hillside street off the Skyline side of town, we took on a tub-to-shower conversion in a 1960s ranch where the bath wall had been opened for exactly that retrofit. The studs were new, the tile line was true, but the old curb pitched toward the room. We set blocking, corrected the curb, and installed a frameless Mr-Glass pivot enclosure with new hinges and laminated glass, then re-sealed it and confirmed the door swing once the tile cured. That sequence, retrofit first and glass second, is what doing this work correctly in San Bruno actually looks like. Contractors who skip it leave homeowners with a beautiful glass panel that binds in six months because the wall it hangs on is still moving.

Mr-Glass Models & Products We Service in San Bruno

We service the Mr-Glass line San Bruno homeowners actually installed over the past few decades: frameless pivot shower enclosures, sliding bypass shower doors, semi-frameless hinged shower doors, and Mr-Glass mirrors and interior glass door assemblies. When a series is still supported, we use OEM rollers, pivots, hinges, and sweeps so the hardware matches the original geometry. When Mr-Glass has discontinued a frame profile or hinge type, we switch to quality aftermarket components that we’ve tested on similar jobs, and we tell you the difference before we order anything. We repair hardware and re-seal whenever the glass itself is sound. We recommend replacement only when a panel is out of square, chipped, or the safety glazing has failed and can’t be brought back to code.

Mr-Glass Service Pricing in San Bruno

FAQs – Mr-Glass Construction in San Bruno

Does San Bruno’s fault zone affect a shower enclosure install?
Yes, directly. San Bruno’s mapped fault and the hillside stability requirements mean bath remodels often include foundation bolting and shear-wall retrofits before finish work starts. The enclosure gets templated after that structural work settles. If a contractor measures before the retrofit is done, the glass will bind or swing wrong once the wall stops moving. Call (844) 681-3590 to have us check the sequence on your project.

Why does my Mr-Glass sliding door keep jumping the track?
The usual cause in San Bruno is worn rollers whose axles have ovalized from years of damp-cold cycling near the bay, combined with rollers that were replaced at some point with off-brand wheels that don’t match the original Mr-Glass track profile. We replace with OEM or matched aftermarket rollers and adjust the track alignment. Call (844) 681-3590 and we’ll tell you whether it’s rollers, track, or both.

Can you replace just the glass in an older Mr-Glass semi-frameless unit?
Yes, when the frame is sound and the hinge geometry can accommodate a new panel. If the frame profile is discontinued, we source a compatible aftermarket panel and re-set the hinges to the original pivot points. We’ll say so plainly when a full enclosure replacement is the better call.

Will moisture from San Bruno’s foggy winters damage new enclosure hardware?
It can if the sealant fails or the sweeps don’t fit right. San Bruno’s damp marine air accelerates mildew growth and shrinks vinyl components faster than inland cities see. Properly bedded clear sealant, correct curb pitch, and sweeps matched to the Mr-Glass channel all add years of life to the hardware. Call (844) 681-3590 for a re-seal quote before the water finds its way behind the curb.

Do you need a permit in San Bruno for a tub-to-shower conversion?
Generally yes, because the work changes the plumbing drain and possibly the wall assembly, and San Bruno’s building department reviews bath work that touches structural or wet-wall framing. We pull the permits, schedule the inspection, and handle the correction if one comes up. Call (844) 681-3590 and we’ll confirm what applies to your exact scope.

Service Areas Near San Bruno

We serve San Bruno and the surrounding Peninsula and greater Bay Area from our operating base. That includes Mr-Glass service in South San Francisco, Mr-Glass service in Brisbane, Millbrae, Burlingame, and the hillside neighborhoods up toward the Skyline side of the ridge. If your project is a short drive from San Bruno, we can usually schedule it without a second trip charge. You can also see our full San Bruno service area for coverage details.

Framework Contractors is an independent construction and glazing contractor, not a manufacturer-authorized or partner service for Mr-Glass. The Mr-Glass name and model lines referenced here are the property of their respective owner. We install, service, and repair Mr-Glass products, and we hold no warranty relationship with the brand. For more on how we work with the full Mr-Glass line, see our Mr-Glass sales & service page.

Book Your Mr-Glass Service in San Bruno Today

If your Mr-Glass enclosure is binding, leaking, or showing its age, call (844) 681-3590 now. We’ll schedule a site visit in San Bruno, measure the opening, and give you a written estimate for the repair or replacement. Same-week scheduling is often available for hardware fixes and re-seals.

Written by Noel Carbajal, Owner at Framework Contractors, serving San Bruno with Mr-Glass service and full-scope construction since the 1990s.