Mr-Glass Construction in South San Francisco, CA

Mr-Glass Construction in South San Francisco, CA | Framework Contractors

We’re Framework Contractors, and we install, repair, and service Mr-Glass shower enclosures, mirrors, and glass systems across South San Francisco. The short answer: yes, we work on Mr-Glass products here every week, and what makes our work different in this city is that we actually understand how fog-belt damp and out-of-plumb mid-century walls affect glass hardware. If your Mr-Glass door binds, leaks, or won’t seal, call (844) 681-3590 for a free estimate.

Call (844) 681-3590

Why South San Francisco Residents Choose Us for Mr-Glass Service

We’re an independent contractor, not a manufacturer affiliate. That matters because we work for you, not a warranty department. Noel Carbajal has spent the better part of three decades building and remodeling across California, and he runs our crews with one rule: fit the product to the house, not the house to the product. That’s especially relevant in South San Francisco, where so many bathrooms were framed decades ago and have shifted since. We know the Mr-Glass frameless bi-fold series, the semi-frameless pivot enclosures, the sliding tub-shower bypass doors, and the custom-cut fixed panels. If you’re planning a walk-in shower or a tub-to-shower conversion, we’ll help you pick the right Mr-Glass configuration for your specific opening, then install it so it actually seals. For more about how we approach this brand, see our Mr-Glass sales & service page.

Common Mr-Glass Construction Problems We Solve in South San Francisco

• Corroded rollers and pivots. Persistent marine fog and damp onshore air off San Bruno Mountain means bathroom hardware sees moisture year-round, not just after showers. Mr-Glass sliding and pivot doors in poorly ventilated South San Francisco bathrooms develop seized rollers and corroded pivot pins faster than inland. We replace them with OEM hardware where the series is still supported.
• Leaking sweep seals and bottom rails. Aged sweeps on Mr-Glass bypass enclosures let water through, and in this climate it doesn’t just dry out. It feeds rot into the wood-frame threshold and the wall behind the tile. We see this in the 1920s – 1950s stucco homes throughout the flatlands. When we reseal, we check the framing underneath.
• Racked panels and binding doors. As South San Francisco’s older wood-frame homes settle, glass panels and door frames shift out of plumb. Door edges bind, hinges pull, and the enclosure stops closing cleanly. We re-square the opening or template a custom panel to fit what the house actually is now.
• Out-of-square rough openings. In tight lot-line mid-century baths, a stock Mr-Glass enclosure often won’t close properly because the wall isn’t square. The door swings but never seals. That’s a custom-cut fixed panel or a re-squared alcove, not a bigger gap.
• Rot at the threshold from failed seals. By the time a homeowner notices water on the floor, the bottom plate beneath an older Mr-Glass enclosure may already be soft. We cut out the damaged framing, waterproof the alcove, and set the new glass on marine-grade hardware so this doesn’t repeat.

Mr-Glass Service in South San Francisco: What Local Conditions Mean for Your Equipment

South San Francisco is a two-economy town. The biotech and lab-tenant-improvement work around Oyster Point and Genentech’s headquarters pulls glass contractors toward commercial glazing and clean-build standards. But the residential side is something else entirely: dense mid-century worker housing in the flatlands, much of it built lot-line to lot-line off Grand Avenue and the original South City core. Those homes have detached garages, additions that were permitted decades ago (or not at all), and bathrooms framed in wood that has been breathing fog for sixty years. A Mr-Glass in San Bruno enclosure in one of these houses lives in a damp microclimate. The glass and hardware aren’t the weak point; the threshold framing is. In the hillside neighborhoods around Sign Hill and the west side, the same damp meets sloped lots and shifting foundations, so doors rack and bind. Our crews read these houses before we touch the glass, because in South San Francisco the glass is rarely the first thing that failed.

Mr-Glass Models & Products We Service in South San Francisco

We service the full Mr-Glass residential line: frameless bi-fold shower doors, semi-frameless pivot enclosures, sliding tub-shower bypass doors, and custom-cut frameless fixed glass panels and wall mirrors. Our parts approach is straightforward. We fit OEM Mr-Glass hardware when the series is still supported and aftermarket rollers, pivots, sweeps, and seals only when OEM is discontinued or a custom panel is needed to fit an out-of-square opening. If a panel is sound, we repair and reseal it. If the frame is racked or the seal track has rotted, replacement is the honest call. That policy keeps South San Francisco homeowners from paying for glass they don’t need.

Mr-Glass Service Pricing in South San Francisco

FAQs – Mr-Glass Construction in South San Francisco

Are you an authorized Mr-Glass dealer or service provider?
No. We’re an independent contractor that buys, fits, and services Mr-Glass products regularly, but we have no manufacturer affiliation. That means we recommend repairs and parts based on what’s best for the homeowner, not what a warranty program dictates. If we can save a sound panel by replacing hardware, we will.

Will a Mr-Glass slider survive a Sign Hill or west-side hillside bathroom?
It can, but only if the opening is square and the framing is sound before installation. Hillside homes in South San Francisco settle, and a slider installed on an out-of-plumb wall will bind and leak from day one. We template the opening, correct the framing if needed, and use hardware rated for damp conditions. Call (844) 681-3590 and we’ll tell you what your wall actually needs.

Do you use OEM or aftermarket parts for Mr-Glass repairs?
OEM first. When the original Mr-Glass repair in Daly City hardware for a series is still available, we use it. When a series is discontinued or the opening requires a custom fit, we use quality aftermarket rollers, pivots, sweeps, and seals selected for marine-damp environments like South San Francisco’s fog belt.

How long does a Mr-Glass replacement or tub-to-shower conversion take?
A straightforward shower door swap or panel replacement usually takes one day on site. A tub-to-shower conversion with framing correction and waterproofing typically runs two to four days, depending on what we find behind the tile. We’ll give you a clear timeline with your estimate.

How much does a Mr-Glass shower enclosure cost in South San Francisco?
A walk-in Mr-Glass shower installation in this market typically runs $5,310 to $14,160. A tub-to-shower conversion ranges from $4,130 to $11,800. Your exact price depends on the glass configuration, the condition of the opening, and whether we need to correct framing before installation. Estimates are free, and the quote we give you is the quote you pay. Call (844) 681-3590 for an exact number.

Service Areas Near South San Francisco

While this page focuses on South San Francisco, our crews also serve nearby communities along the Peninsula and in the broader Bay Area. If you’re in Brisbane or Pacifica, you’re close enough that we can usually schedule within the week. Our full South San Francisco service area page covers our complete reach.

Book Your Mr-Glass Service in South San Francisco Today

If your Mr-Glass door binds, leaks, or simply doesn’t seal the way it should, call (844) 681-3590. We’ll schedule a free estimate, check the framing behind the glass, and give you a written line-item quote. Build it right the first time; the second time costs twice as much and nobody’s happy.

Written by Noel Carbajal, Owner at Framework Contractors, serving South San Francisco with independent Broadmoor Mr-Glass service installation and repair.