Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Ontario, CA | Framework Contractors
We provide independent CGI cabinet installation, refacing, and full kitchen and bath remodeling across Ontario, and the one thing that separates our CGI work here is understanding the city’s split construction market: fast-turnaround tract homes and the tilt-up warehouse belt along the 60 and 10. That means we sequence cabinet work around distribution-center punch lists just as often as homeowner timelines. We are an independent contractor and are not authorized, sponsored, or endorsed by CGI. Call (844) 681-3590 for a free estimate on any CGI cabinetry project in Ontario.
Why Ontario Residents Choose Us for CGI Service
CGI builds a good box. The Euro-style frameless full-overlay lines are precise, and the all-plywood construction handles the Inland Empire’s dry heat better than particleboard alternatives. But a cabinet is only as good as the wall behind it, and that’s where most Ontario installs go wrong. Noel Carbajal, our owner, grew up patching stucco and reroofing porches in Santa Ana before he could drive, studied Construction Technology at Santiago Canyon College, and has spent three decades reading walls, slabs, and framing across Orange County and the Inland Empire. We bring that to every CGI job in Ontario, whether it’s a Shaker kitchen in a 1970s tract home off the 91761 corridor or a thermofoil slab run in a warehouse break room. We also handle CGI repair in Montclair when Ontario-area projects extend west. We spec CGI’s own hinges, glides, and door fronts when the box is sound, and we’re direct about when a run should be re-faced versus replaced.
Styles & brands we work with
Common CGI Construction Problems We Solve in Ontario
Here’s what we see repeatedly across Ontario, and what we do about it:
- Thermofoil lifting and peeling at door edges. Ontario’s hot, dry inland summers push interior temperatures hard, especially on west- and south-facing kitchens with unshaded windows. The thermofoil on slab door lines can release at the edges and curl. We re-face with OEM CGI doors or move to painted Shaker lines when the run is worth saving.
- Uneven door reveals on frameless boxes. Fast-turnaround tract and infill construction in Ontario rarely leaves drywall plumb. Frameless full-overlay boxes set straight against a wavy wall show uneven gaps and rubbed stiles. We shim and scribe the run to the wall before a single door goes on.
- Moisture wicking into toe kicks. The older slab-on-grade stock through the 91761, 91762, and 91764 ZIP codes often has no vapor barrier under the slab. Particleboard or MDF toe kicks pull moisture up from the floor and swell. We swap in sealed or plywood toe kick material and address the moisture path where we can.
- Dust-fouled glides and hinges during nearby earthwork. Santa Ana wind events and red-flag grading restrictions are part of building in Ontario. When a kitchen is open while grading or trenching happens anywhere nearby, that fine dust gets into soft-close hardware. We seal open boxes and protect exposed hardware during the rough phases.
- Racked or water-damaged boxes. When a cabinet run has structural racking or water damage beyond the face, re-facing is throwing money away. We’ll tell you straight, and replace the run with new CGI boxes matched to the existing layout.
CGI Service in Ontario: What Local Conditions Mean for Your Equipment
Ontario’s warehouse belt along the 60 and 10 changes the rhythm of cabinet work here in a way you won’t see in Claremont or most neighboring cities. Many of our CGI installs are for tilt-up and tenant-improvement contractors building out break rooms, offices, and model-home sales centers on the same schedule as the big-box shell. That means a CGI cabinet run in Ontario often has to hit a distribution-center punch-list date, not a homeowner’s timeline. The truck’s already scheduled, the permit’s already pulled, and the CO hangs on the finish. We sequence our CGI work to those dates, and we protect the boxes differently: sealed during rough-in, wrapped through the drywall and paint phases, and installed only when the space is clean and conditioned enough for thermofoil and laminate faces to lay flat. It’s a discipline that comes from working both sides of Ontario’s market, residential and commercial, and from providing Upland CGI service on the same tight schedules. industrial.
CGI Models & Products We Service in Ontario
We install and finish the full CGI residential and commercial cabinet lines: Euro-style frameless full-overlay cabinetry, all-plywood box construction with soft-close concealed hinges, thermofoil and laminate slab doors for tenant-improvement and rental work, and painted and stained Shaker-style lines for full kitchens and baths. For repairs, we spec CGI’s own OEM hinges, glides, and replacement door and drawer fronts whenever the box is sound. We move to quality aftermarket hardware only when the OEM line is discontinued. We keep common CGI hardware and touch-up materials stocked locally so a repair in Ontario doesn’t wait a week on a freight shipment, and we carry the same inventory for CGI service in Chino.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Ontario
Here’s what CGI cabinet and remodel work typically runs in the Ontario market:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Full Bathroom Remodel | $9,000 – $28,000 |
| Countertop Installation | $2,000 – $6,500 |
What moves the number is the size of the run, whether we’re re-facing sound boxes or replacing the whole carcass, the door line you choose, and how much wall correction the Ontario framing demands. A free estimate includes a straight read on all of it, line by line. Call (844) 681-3590 and we’ll come measure.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well, including San Antonio Heights CGI service calls. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Ontario
Yes. We regularly install CGI slab and thermofoil lines in warehouse break rooms, sales centers, and TI office spaces across Ontario’s 60/10 corridor, and we work to the GC’s punch-list schedule, not ours. Call (844) 681-3590 and we’ll coordinate the dates.
Usually not. If the boxes are solid and the peeling is limited to door and drawer faces, we re-face the run with OEM CGI doors or a painted Shaker line and save you the cost of a full replacement. If the carcass is racked or water-damaged, we’ll replace only what’s failed.
They change how we protect the job. Fine dust from grading or trenching nearby will foul soft-close hinges and glides, so we seal open boxes and cover exposed hardware whenever earthwork is active anywhere close. We also schedule finish phases around red-flag days when possible.
Two stand out: slab-on-grade floors with no vapor barrier that wick moisture into toe kicks, and framing that’s out of plumb enough to throw off frameless full-overlay door reveals. We fix both at the install stage so the run looks and works right. Call (844) 681-3590 for a wall and slab check.
Yes. When the scope requires it, we pull the Ontario building permits, coordinate the inspections, and don’t close the job until it passes. That’s standard on our full kitchen and bath remodels, and we’ll tell you at the estimate whether your job needs one.
Service Areas Near Ontario
We serve Ontario and the surrounding Inland Empire and Orange County corridor: CGI service in Claremont to the northwest, CGI service in Jurupa Valley to the east, plus Chino, Rancho Cucamonga, and Fontana. Our full Ontario service area covers the 91758, 91761, 91762, and 91764 ZIP codes, and our broader CGI sales & service work spans the IE and OC markets.
Book Your CGI Service in Ontario Today
Whether it’s a re-face, a full kitchen, or a warehouse TI run, we’ll measure it and price it straight. Call (844) 681-3590 for your free CGI estimate in Ontario.
Written by Noel Carbajal, Owner at Framework Contractors, serving Ontario, CA.