Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Costa Mesa
Finding a general contractor in Costa Mesa who can handle your whole project without juggling three different crews is harder than it should be. We know the Westside’s tight alley-loaded lots, the 1950s slab-on-grade tract homes off Victoria Street, and the marine-layer moisture that eats standard fasteners within a decade. Our crews are in Costa Mesa every week, and we answer the phone when you call. Reach us at (844) 681-3590 for a straight answer and a free estimate.
Key Takeaways
- One contract, one point of contact for interior and exterior work, from kitchens to roofs to paver driveways.
- Coastal-spec material choices matter in Costa Mesa. We specify stainless and marine-grade hardware where inland contractors use zinc-plated.
- Kitchen remodels in Costa Mesa run $14,000 – $45,000. Bathrooms run $9,000 – $28,000. You’ll see exact line-item pricing below.
- We pull permits, coordinate with neighbors on zero lot-line jobs, and stand behind the workmanship.
Why Framework Contractors Is Costa Mesa’s Preferred General Contractor Company
Costa Mesa homeowners keep calling us back because we treat a remodel on a 1960s stucco tract home differently than a remodel on a big inland lot. The lots are tighter here, the neighbors are closer, and the salt air is always working against the exterior. Noel Carbajal built Framework Contractors around the idea that one accountable team should handle every phase, not just the pretty finish work. That approach makes a real difference in Costa Mesa, where a roof replacement, window replacement, and stucco repair often need to happen in the same project.
Our Costa Mesa customers hire us for the same reasons they refer us: we show up when we say we will, we keep the job site clean on tight streets where parking is scarce, and we specify materials that last in this specific coastal environment. We are not the cheapest contractor in Costa Mesa, and we do not try to be. We are the contractor who tells you up front that a zinc-plated fastener will fail in this salt air, and then gives you the stainless option at a clear price.
Styles & brands we work with







Hire a General Contractor in Costa Mesa
When you hire a General Contractor in Costa Mesa, you are hiring someone to own the whole job, from tear-out to final inspection. That means demolition, structural work if needed, plumbing and electrical coordination, finish carpentry, paint, and exterior repairs, all under one contract. Our General Contractor team handles kitchens, bathrooms, whole-home renovations, and exterior work without handing you off to a subcontractor you have never met. A kitchen remodel in Costa Mesa typically runs $14,000 – $45,000 depending on cabinet brand, layout changes, and whether you move plumbing or electrical. A bathroom remodel usually lands between $9,000 and $28,000.
Single-Contract Remodels
Most Costa Mesa remodels touch multiple systems at once. You open a kitchen wall and find corroded window fasteners, or you tear out a bathroom vanity and discover slab-level plumbing that needs re-routing. Under one contract, those discoveries do not turn into a bidding war between three separate trades. We price the known scope, flag the likely unknowns on 1950s – 1970s Costa Mesa stock, and give you a written line-item quote before work starts.
Permit-Ready Work
Costa Mesa’s building department is efficient but exacting, especially on additions and structural changes to older slab-on-grade homes. We pull the permits, schedule the inspections, and make sure the job passes. According to our experience in the 92626, 92627, and 92628 zip codes, clean permit paperwork keeps the schedule from slipping by weeks.
General Contractor Services in Costa Mesa
General Contractor Services in Costa Mesa span the full envelope of the home, and that is the point. We run kitchen and bath remodels, whole-home renovations, room additions, roofing, window and door replacement, fencing, hardscape, and ADU construction, all through one accountable team. On a 1960s stucco tract home near South Coast Drive, that might mean a kitchen remodel and a roof replacement in the same project. On a Westside lot with zero lot-line setbacks, it might mean a bathroom remodel plus a paver patio that has to be coordinated with the neighbor’s fence line.
Interior Remodeling
Kitchens and bathrooms are the bulk of what we do in Costa Mesa. The 1950s – 1970s stock is full of original galvanized plumbing, single-pane windows, and layouts that predate modern appliances. We tear out carefully on slab-on-grade homes, because re-routing drains in a concrete slab is different from working in a raised foundation. Our pricing reflects that reality: a small kitchen remodel starts around $9,000, a full kitchen tops out near $45,000, and a walk-in shower install runs $4,500 – $12,000.

Exterior Systems
Roof replacement, window replacement, fencing, and hardscape are not add-ons for us. They are core scopes, and in Costa Mesa they have to be done with coastal-spec materials. We install GAF and Owens Corning roofing with hot-dip galvanized or stainless fasteners, and we replace steel window frames with marine-grade aluminum or properly sealed vinyl. A roof replacement in Costa Mesa runs $8,000 – $20,000, window replacement $4,500 – $15,000, and a paver driveway $7,000 – $18,000.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Costa Mesa
We work with the brands you already trust, and we stock or locally source parts for Costa Mesa customers so you are not waiting on a warehouse in Texas. For prefab ADUs, we partner with Dvele and Mighty Buildings, both California-based manufacturers whose steel-frame and panelized systems hold up in coastal environments better than wood-frame additions. For cabinetry and counters, we install KraftMaid, Wellborn, Cambria, and Caesarstone. Roofing draws from GAF, CertainTeed, and Owens Corning. Windows come from PGT, Therma-Tru, and ECO Window Systems. The point is not the list. The point is that you choose the material, and our craftsmanship installs it to spec, not to shortcut.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Costa Mesa Homes
Some failures show up so regularly in Costa Mesa that we can predict them before the first walkthrough. Here is what we see, and what we specify instead.
- Corroded exterior fasteners: Electro-galvanized and zinc-plated screws on exterior trim, roofing, and window frames fail within 5 – 7 years in salt air. In the marine layer, they rust through paint and into sheathing. We specify stainless steel or hot-dip galvanized fasteners on every exterior penetration.
- Rotting fence posts at the ground line: Standard pine posts set in concrete rot where the marine moisture sits against the wood. We use hot-dip galvanized steel posts or pressure-treated posts with a gravel drainage base, which buys years of extra life on Costa Mesa fences.
- Stucco cracking and spalling at control joints: Salt-laden moisture wicks into rigid stucco joints, especially on 1960s tract homes where the original control joints are still in place. We cut and seal control joints with flexible, salt-resistant sealant before we paint, not after the cracks appear.
- Paver joint failure and erosion: Standard sand joints wash out or hold salt moisture against the paver edges, causing premature spalling. We use polymer-modified joint sand and, on driveways and patios near the 405 corridor, we seal the joints to keep salt moisture from cycling through the system.
On a 1960s stucco tract home off Victoria Street in the Westside, our crew tore out a rusted original steel window frame and found the salt air had corroded the fasteners all the way into the sheathing. We replaced them with stainless-steel screws and marine-grade aluminum window frames, then sealed the joints with a salt-resistant sealant, and the homeowner hasn’t had a leak since, even through marine-layer season. That is the difference between building for Costa Mesa and building generically.
Pricing for General Contractor in Costa Mesa, CA
General contractor pricing in Costa Mesa tracks a little higher than inland Orange County because the material spec has to be coastal-grade. Zinc-plated fasteners, standard pine fence posts, and unsealed paver joints are cheaper on day one, but they fail within a decade in this air. The coastal-spec version of a job costs roughly 10 – 15% more up front. Over a 10-year window, it is the cheaper option, because you are not paying for a second round of tear-out and replacement.
Here is what we quote for common Costa Mesa scopes:
| Scope | Costa Mesa Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Window Replacement | $4,500 – $15,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
Exact pricing depends on the size of the job, the condition of what we are tearing out, and the materials you choose. Call (844) 681-3590 for a free written estimate with line-item pricing and no change orders once the scope is set.
We Also Serve Cities Near Costa Mesa
Our crews work throughout the coastal corridor, so if you are in Costa Mesa or just across the city line, we can help. We regularly serve Newport Beach, Fountain Valley, Huntington Beach, and San Joaquin Hills, which means we know how the salt air and tight lots change from one ZIP to the next. Same crews, same material standards, same phone number: (844) 681-3590.
Serving Costa Mesa, CA — Our Local Coverage Area
We’re based in the Costa Mesa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Costa Mesa
Costa Mesa’s coastal marine layer carries salt and moisture year-round, and standard electro-galvanized or zinc-plated fasteners corrode through within 5 – 7 years. Inland, those same fasteners might last 20 years, but near the Westside and the 405 corridor we see rusted fasteners on original 1960s window frames and roof trim on nearly every tear-out. We specify stainless steel or hot-dip galvanized fasteners on all exterior work, which closes most of that failure window. Call (844) 681-3590 for a free inspection of your existing fasteners before they fail.
A coastal-spec remodel in Costa Mesa typically costs 10 – 15% more up front than the same job with inland-spec materials. That difference covers stainless fasteners, marine-grade window frames, sealed stucco control joints, and polymer-modified paver joints. Over a 10-year period, the coastal spec is the cheaper option, because the inland spec fails in this environment and you pay for the repair plus the original mistake. We quote both options honestly, then recommend what we would install on our own homes.
Room additions in Costa Mesa require a building permit, and depending on the scope, you may also need electrical, plumbing, and mechanical permits from the city. Costa Mesa’s planning department reviews setbacks, lot coverage, and parking, and many Westside lots are at or near their maximum lot coverage already. We handle the permit set, the submittal, and the inspections as part of the contract, so you are not chasing paperwork on your own. Call (844) 681-3590 and we will tell you what your specific lot will support.
Yes, we remodel kitchens in Westside Costa Mesa apartments and condos with zero lot-line setbacks, but the process requires more coordination than a standard lot. We pre-walk the site with the neighbor or HOA, schedule material deliveries for specific hours, and keep the tear-out contained so it never spills onto the shared property line. The work itself is no different, but the logistics are tighter, and that is something we plan for up front rather than discovering on day one.
The best way to prevent salt-air corrosion on a new fence or railing in Costa Mesa is to avoid standard zinc-plated hardware and untreated wood posts. We use hot-dip galvanized steel posts, stainless steel fasteners, and marine-grade aluminum railings where the budget allows, and we set wood posts in gravel rather than direct concrete contact. Then we seal any exposed metal and re-seal every few years. It costs a little more up front, and it keeps the fence from rotting at the ground line in the marine layer.
Ready to start? Call Framework Contractors at (844) 681-3590 for a free, no-pressure estimate. We will walk the job, tell you what it costs, and give you a written line-item quote you can hold us to. One contractor. Every system.
Written by Noel Carbajal, Owner at Framework Contractors, serving Costa Mesa since our founding.