Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Fontana, CA | Framework Contractors
Most Unilock work we do in Fontana comes down to one thing: the flat, fast-built lots out here don’t shed water the way sloped ground does, so your base and edge restraint have to be built better than the subdivision grading. We’re an independent Unilock installer, not a manufacturer affiliate, and we set Brussels Block, Beacon Hill Flagstone, wall blocks, and every other Unilock system by the published installation guidelines so it holds up under the Inland Empire sun and those Santa Ana winds. Call (844) 681-3590 for a free estimate anywhere in Fontana.
Why Fontana Residents Choose Us for Unilock Service
Unilock pavers and walls are system products. They don’t fail on their own. They fail when a shortcut got taken on the base, the edge restraint, or the jointing. Noel Carbajal grew up working stucco and porch framing with his uncle, then spent three decades in the Orange County corridor before bringing that “plan first, build clean” habit to Framework Contractors. Our crews here in Fontana know Unilock’s product families well enough to tell you whether a cracked paver is a one-paver reset or a base rebuild that’s been waiting to happen.
Fontana homeowners don’t want to juggle a paver guy, a wall guy, and a patio guy. They want one contractor who knows the brand and knows the ground it’s going on. That’s us. We’re your Fontana General Contractor, independent and free to use genuine Unilock edge restraint, polymeric jointing sand, wall caps, and geogrid instead of whatever generic aftermarket product is cheapest. It matters more than people think.
Call (844) 681-3590, and we’ll come look at the actual lot conditions: the grade, the soil, the existing stucco line. Free estimate. Built to spec, not to shortcut.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Fontana
You’ll spot these failure modes all over Fontana’s 1980s – 2000s tract subdivisions, from the 92335 streets off Sierra Avenue up to the newer builds in 92336 and 92337:
- Pavers shoving and rutting at the driveway edges. When base isn’t compacted in lifts and Unilock edge restraint is set too low, the pavers drift under tire load. Fontana’s shallow, slab-on-grade lots make this worse: water gets under the edge and starts moving material around after the first winter storm.
- Joint sand disappearing within a season. Santa Ana winds blow loose sand out of unsealed or non-polymeric joints fast here. Intense summer UV then bakes the remaining joints, so efflorescence and weed growth show up within a season or two.
- Beacon Hill Flagstone patios heaving and cracking at the joints. A thin, uncompacted base plus Fontana’s clay soils and extreme heat cycling equals slabs that chip, shift, and sometimes tip water back toward the stucco wall instead of away from it.
- U-Cara and older wall block systems leaning or weeping at the property line. When no drainage aggregate or geogrid was built in behind the wall, the wall starts to lean. In fast-built tract yards with tight property setbacks, this can get ugly in a couple of years.
- Brussels Block driveways holding water against the garage slab. If the lot grading was never corrected, the driveway becomes a pond. Then water backs into the garage door track, the stucco line, or the foundation edge.
Unilock Service in Fontana: What Local Conditions Mean for Your Equipment
Here’s the part that’s specific to Fontana, not a generic Unilock overview. Fontana grew east of the I-15 fast, with thousands of stucco tract homes pushed across what used to be flat old ranch land. The grading on these lots was often left barely positive. That’s why the first heavy winter rain in this city exposes yard-to-house water intrusion that neighbors on sloped ground in Orange County never deal with. If you live off a street like Sierra Avenue in 92335, you’ve probably seen water ponding against a patio edge or a garage corner during a downpour.
For a Unilock paver driveway or patio on one of these shallow slopes, standard installation assumptions don’t apply. The base has to be deeper and compacted in lifts. The edge restraint has to be set correctly, not just staked in. The bedding course needs to be built to create positive drainage away from the house. If it isn’t, the pavers aren’t just a surface: they become a catchment system for storm water that wants to go exactly where you don’t want it.
We had a project on a 1990s stucco tract home off Sierra Avenue in 92335 where the backyard had a Brussels Block patio tipping water straight at the wall. Our crew found the original install had almost no base. We pulled the pavers, re-graded away from the house, rebuilt the base in compacted lifts with genuine Unilock edge restraint, and re-laid the Rialto Unilock service compatible Brussels Block with polymeric jointing. Now the patio sheds storm water instead of feeding it into the stucco. That’s the difference between building for Fontana’s flat lots and building for a house on a hill.
Unilock Models & Products We Service in Fontana
We work with the full Unilock paver, slab, and wall system lineup, including the Brussels Block pavers everyone around here puts on driveways and patios, the dimensional Brussels Dimensional Series wall blocks for retaining walls and borders, Beacon Hill Flagstone slabs for patio and walkway coverage, and the U-Cara Multi-Face Wall System for freestanding walls, seat walls, and property-line walls. Unilock sales & service is a core part of what we do.
What we don’t do is mix Unilock paver systems with aftermarket edge products or sand that doesn’t match the system. Mismatched edge restraint is the most common cause of paver shove and wall lean. We specify Unilock’s own edge restraint, wall caps, and geogrid to match the paver or wall product. If only a few pavers are cracked or heaved, we reset and re-sand that section. When the base or grading is the real problem, we rebuild it properly instead of patching over it. That’s the trade-off between a repair that lasts a couple of seasons and one that actually stays put.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Fontana
Here’s what you can expect for Unilock work in Fontana. These ranges reflect local soil prep, base depth, and grading correction on our flat subdivision lots:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition | $45,000 – $130,000 |
What drives the cost is the condition of the existing grade, what’s under the old surface, and whether we’re correcting drainage as part of the job. Your free estimate includes a written line-item quote, so there are no change orders that surprise you later. Call (844) 681-3590 for an exact quote on your Unilock project in Fontana.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Fontana
Only if we build positive drainage into the base and grading before the pavers go down. On Fontana’s flat tracts, that usually means a deeper base, a corrected slope away from the house, and edge restraint set to hold the system in place. We’ll inspect your yard’s existing grade and tell you exactly what’s needed. Call (844) 681-3590 for a free site assessment.
Yes, when they’re installed with factory-recommended edge restraint and polymeric jointing sand. The problems come when installers skip those steps. Loose joint sand blows out in a couple of Santa Ana events, and the pavers start moving. Properly set joints and a compacted base hold.
Brussels Block pavers or Pedley Unilock service compatible Beacon Hill Flagstone slabs both work, but the critical part is grading: the patio surface has to slope away from the stucco wall and the foundation. We re-grade so water runs off, not back into the wall line. Then we build the base to Unilock specifications.
We do. We use the Glen Avon Unilock service compatible Brussels Dimensional Series or U-Cara Multi-Face Wall System, depending on the height and setback requirements. Behind every wall we build a drainage aggregate column and geogrid reinforcement, because Fontana’s clay soils hold water and a wall without backing will start leaning within a few years. Call (844) 681-3590 to discuss your wall project.
Usually, yes. If a few slabs or pavers have heaved and the base underneath them is still compacted, we can lift, reset, and re-sand that section. If the base is the problem, patching it will fail again. We’ll tell you straight which situation you’re in. Call (844) 681-3590 for an honest assessment.
Service Areas Near Fontana
We serve Fontana and the surrounding Inland Empire communities from our home base in the region. You’ll find our crews in Rancho Cucamonga, Rialto, Bloomington, Jurupa Valley, and Ontario. If you’re nearby and want Unilock work done right, Fontana service area coverage extends across all four ZIP codes: 92334, 92335, 92336, and 92337. For neighbors just west of us, see Unilock service in Good Hope and Unilock service in Bloomington.
Book Your Unilock Service in Fontana Today
Building it right the first time costs less than the second time, and nobody’s happy when a patio fails in a year. Call (844) 681-3590 to schedule your free Unilock estimate in Fontana. We’ll walk your lot, check the grade, and give you a written quote that covers the full scope.
Written by Noel Carbajal, Owner at Framework Contractors, serving Fontana since 2004.