Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Aptos, CA | Framework Contractors
We install and repair Unilock segmental pavers and retaining-wall systems across Aptos as an independent contractor. The short version: if you need a Unilock patio, driveway, or terraced wall built or rebuilt in Aptos, we’re the crew that treats the base, drainage, and county permit paperwork as seriously as the paver surface itself. That last part matters here more than almost anywhere else on the coast. Call (844) 681-3590 for a free estimate.
Why Aptos Residents Choose Us for Unilock Service
Noel Carbajal has spent the better part of three decades building and remodeling across California, and the crews he runs understand something that gets lost in a lot of paver work: the paver is the part you can see, but the base underneath is the part that actually keeps it from failing. We treat Unilock pavers as a system, not a surface. That means compacted aggregate base, edge restraint set to spec, open-graded or polymeric joint sand chosen for the drainage reality of the site, and retaining walls built with geogrid and free-draining backfill where the slope demands it.
We’re also straight about what we are and what we aren’t. Framework Contractors is an independent Unilock service provider, not a manufacturer-authorized dealer or affiliate. That independence is the point, frankly. We order genuine Unilock units for matching work and use compatible quality edge restraint and geogrid on repairs, but we answer to the customer and the county, not to a sales sheet. If a paver run can be lifted, re-based, and re-laid, we’ll tell you that and price it that way. If the base under it has failed, we’ll say so, too.
For Aptos homeowners, this matters because the coastal fog and winter rain are relentless on exterior hardscape. Materials, base design, and drainage details all get tested here, every single year. We plan for that from the first site visit.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Aptos
These are the Unilock failures we see most often in Aptos, and they are not random. Each one tracks back to local conditions:
- Efflorescence bloom on gray-toned Brussels Block and Sierra pavers. After wet winters, the marine fog keeps joints damp long enough for mineral salts to migrate to the surface. It reads as a dirty or defective install, but it’s chemistry. We clean and mitigate it properly, and we can explain what causes it so it doesn’t get misdiagnosed as a product problem.
- Base failure and raveling on hill-slope patios. Hand-tamped gravel bases over expansive or clay-heavy Aptos Hills soils move during wet-dry cycles. The pavers themselves are usually fine. The sub-base is the problem. We cut out the failed section, re-grade, re-compact, and re-lay the original units where they’re still good.
- Edge restraint and joint sand loss on driveways and walkways. Winter runoff sheet-flows off slopes above Soquel Drive and the hillside neighborhoods, scouring open-graded joint sand and letting pavers shove and gap at the apron. We reset the edge restraint and re-sand with polymeric material that holds up better under direct water flow.
- Retaining-wall settlement or bulging on terraced Day Valley yards. Walls built without adequate geogrid and free-draining backfill soak up wet-season saturation, then hydrostatic pressure pushes the face out. We rebuild the wall properly, which often means tearing it down to the footing rather than pushing it back square and pretending that’s enough.
- Concrete or paver truck staging failures on narrow private lanes. This is less a paver problem and more a logistics problem, but we see the aftermath when a delivery blocked a neighbor’s access or a truck couldn’t turn around. We stage deliveries differently. Up in the Aptos Hills, we schedule material drops in single-morning windows so a loaded truck never blocks the lane for more than a few hours.
Unilock Service in Aptos: What Local Conditions Mean for Your Equipment
Here is the thing most Unilock pages never mention, and most Aptos contractor pages never connect: Aptos is unincorporated Santa Cruz County. There is no city building department. A paver driveway or a terraced retaining wall on a graded slope runs through county permitting, and depending on the site, that can trigger geotech and grading review. What that means for your Unilock project is practical: the base design, wall embedment, drainage plan, and sometimes even the geogrid spec have to be documented in the permit application. A Capitola or Scotts Valley job on a flat lot may not require any of that. An Aptos General Contractor knows that an Aptos Hills or Day Valley job on a slope almost certainly will. We handle the county permit package, the geotech referral if it’s needed, and the construction to the approved spec. That is a real difference, and if a contractor tells you they’ll just “sneak it in without permits” on a hillside retaining wall in Aptos, that’s a red flag the size of a concrete truck.
The climate doubles down on this. Marine-influenced fog keeps moisture in the joints for months, and winter rain saturates backfill that hasn’t been designed to shed water. Sloped lots in Aptos Hills and Day Valley, not far from La Selva Beach Unilock service areas, get the worst of both: the moisture load of the coast and the drainage pressure of the hills. We resolve that by designing base and wall systems that assume water will be present, because here, it always is.
Unilock Models & Products We Service in Aptos
We install and repair the full range of Unilock product lines, including Brussels Block, Beacon Hill, Onyx, Sierra, and Lineo. When a run fails and needs matching, we source genuine Unilock units in the correct color and size rather than substituting a look-alike block that ages differently and announces the repair for the rest of its life. We stock common edge restraint, polymeric joint sand, and geogrid on our trucks for fast turnaround in Aptos, and for fewer-than-pallet matching needs we coordinate direct with Unilock distribution. For broader project work, see our Unilock sales & service page. On the repair side, we take the honest position on almost every residential paver job: repair and re-base the failing section instead of ripping out an entire patio that’s still structurally sound. A few hundred square feet of lifted pavers does not justify a full teardown. A failed base under half the patio does. We’ll show you the difference.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Aptos
What drives the cost is never mysterious: access, slope, base condition, and material count. A flat patio with Unilock in Rio Del Mar at grade is a different job from a terraced retaining wall up a Day Valley lane. Our free estimates include line-item labor, material, and any known county permit fee approximations so you can compare against other bids without guesswork.
| Service | Typical Range in Aptos |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
These ranges assume a functional base in reasonable condition. A failed base, a retaining wall that needs full reconstruction, or a site that requires geotech review will move the numbers. The estimate is always free, and it’s always specific to your property. Call (844) 681-3590 and we’ll come look.
Serving Aptos, CA — Our Local Coverage Area
We’re based in the Aptos area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Aptos
Does a paver patio or retaining wall in Aptos need a county permit? It depends on height, slope, and location. Retaining walls over three feet generally require a Santa Cruz County building permit, and any wall supporting a surcharge or near a property line gets closer review. Paver patios at grade usually don’t trigger permits, but a paver driveway on a graded slope can trigger grading review. We’ll tell you at the estimate stage whether your specific site will need county sign-off, and we’ll prepare the package if it does. Call (844) 681-3590 for a straight answer on your property before you spend a dime.
Why do my Unilock pavers look white and chalky after winter? That’s efflorescence, mineral salts migrating to the surface as moisture evaporates through the paver. The marine fog and wet winters in Aptos keep joints damp long enough for the salts to bloom, especially on gray-toned Brussels Block and Sierra units. It’s cosmetic and cleanable, not a product failure. We can clean and mitigate it, and we’ll tell you if the underlying drainage needs attention so it stops coming back.
Can you match my existing Unilock pavers for a repair? Yes. We source genuine Unilock units in the original color and size, which matters because substitutions age differently and leave a visible patch. For older runs where the exact dye lot is gone, we’ll get as close as the current product line allows and tell you honestly how the match will read. Most Aptos homeowners find a well-sourced match is far cheaper than a full replacement. Call (844) 681-3590 with the product name if you know it, and we’ll start the search.
How do you get a concrete or paver delivery truck up a narrow Aptos Hills lane? With planning, not luck. Narrow private lanes in the Aptos Hills don’t leave room for a loaded truck to block traffic or fail to turn around. We stage material deliveries in a single morning window, coordinate with neighbors when access requires it, and typically hand-carry or buggy material the last stretch rather than wedge a truck where it doesn’t belong. That scheduling reality is baked into our Aptos process from the first site visit.
What keeps a hill-slope driveway from shifting every rainy season? The base and the edge restraint, not the paver itself. On a sloped Aptos driveway, we compact the aggregate base in lifts, install edge restraint to county spec, and use polymeric joint sand that resists scouring from sheet-flow runoff. Where the slope is steep or the soil expansive, we’ll spec geogrid and may recommend a different base depth than a flat-lot job would call for. The pavers stay put when the system underneath them is built for the slope. Call (844) 681-3590 for an estimate that accounts for your grade, not a default detail.
Service Areas Near Aptos
We run Unilock service across the mid-county coast and into the Santa Cruz Mountains. Up the coast, see our Unilock service in Seacliff page for the beach terrace work there. Up into the hills, our Unilock service in Day Valley page covers the terracing and slope work. For the full picture of where we go, see our Aptos service area page.
Book Your Unilock Service in Aptos Today
If your Unilock patio, driveway, or retaining wall needs a straight assessment in Aptos, call (844) 681-3590. The estimate is free, the advice is honest, and if the base is sound we’ll say so instead of selling you a replacement you don’t need. Build it right the first time. The second time costs twice as much and nobody’s happy.
Written by Noel Carbajal, Owner at Framework Contractors, serving Aptos since before the county started requiring geotech on half the hillside jobs we now rebuild.