Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Felton, CA | Framework Contractors
We install, repair, and replace PGT windows and doors across Felton year-round, and we do it as an independent provider through our General Contractor in Felton, not a manufacturer-authorized shop. The work is different here because Felton sits inside Santa Cruz County’s Wildland-Urban Interface fire zone, where nearly every window and door opening is shaped by ember-resistant and fire-hardening code requirements that flatland crews never touch. When you call (844) 681-3590, you get a builder who knows PGT product lines as well as the mountain conditions they live in.
Why Felton Residents Choose Us for PGT Service
We have spent years setting PGT WinGuard and Premier units into sloped, redwood-shaded parcels along Highway 9, Graham Hill Road, and the surrounding neighborhoods of Felton. That matters because a window or sliding door on a pier-and-post cabin does not behave like the same unit on a slab in the valley. The frame moves, the deck settles, and the weather presses in from every side. We plan for that before the first screw goes in.
Older Felton homes, especially the 1950s to 1970s redwood-era cabins, rarely have plumb and square openings. That is a fact we work with, not against. Our lead, Noel Carbajal, learned framing and finish work through the Construction Technology program at Santiago Canyon College before spending close to three decades remodeling across Southern California. His habit of re-sloping a sill and re-flashing the rough opening before installing a new unit is the difference between a PGT window that drains properly and one that rots the wall behind it. We would rather fix what the last crew got wrong than bury it under trim.
Styles & brands we work with
Common PGT Construction Problems We Solve in Felton
- Water tracking past sash weep holes and sill flashings. Heavy Felton winter rain finds every flat sill flashing someone installed. Water ponds, wicks into the rough opening, and rots framing fast under redwood canopies that never fully dry. We pull the unit, re-slope the sill, re-flash the opening, and reset the window so drainage actually works.
- Sticky vinyl sashes and failed corner welds. Long dry summers bake west- and south-facing windows, then wet winters hammer the same units. Ultraviolet damage and moisture degradation wreck weatherstripping, make operation stiff, and split corner welds. Drafts follow, and so do higher heating bills.
- Fogged insulated glass on PGT WinGuard units. Wide daily temperature swings, common on Felton lots tucked under trees, stress the seal between panes. When the desiccant is spent and the seal fails, the glass fogs. That is a sealed-unit replacement, and we will tell you straight when a repair would just delay the inevitable.
- Sliders that rack and refuse to latch. Decks settle on sloped Felton parcels. When the deck drops a half inch, the PGT sliding door frame twists, rollers bind, and the latch no longer lines up. We re-shim and re-level the panel, and swap in fresh OEM rollers and tracks where the old ones are chewed up.
- Screen and weatherstrip failures from debris and sun. Redwood duff and pine needles work into tracks, tear screen mesh, and grind down weatherstripping. It is a smaller fix, but left alone it becomes a bigger air and water leak.
PGT Service in Felton: What Local Conditions Mean for Your Equipment
Felton sits in the redwood and fir belt of the San Benito and Santa Cruz Mountains, and that single fact changes every PGT installation we touch here. Santa Cruz County wildland fire code, along with Cal Fire defensible-space rules, pushes ember-resistant and fire-hardened assemblies onto nearly every window and door opening. A contractor out of San Jose offering PGT in Scotts Valley might quote a standard window and move on. We quote a WinGuard or an equivalent impact-rated assembly because the WUI requirements here demand it. On a Graham Hill Road cabin with old redwood siding and a pier-and-post foundation, our crew found the original PGT slider racked in its opening after years of deck settling, with water tracking past a flat sill flashing into the framing below. We pulled the unit, re-sloped and re-flashed the rough opening, and set a new WinGuard slider with fresh OEM rollers and a tight seal. No more draft, and no more rot creeping up the wall. That is the Felton version of a window replacement, and it is a different job from the flatland version.
PGT Models & Products We Service in Felton
We work on the PGT product families most common across Felton: WinGuard Vinyl impact-rated single-hungs and casements, WinGuard Aluminum impact windows and sliding glass doors, and the Premier Vinyl series single-hungs and sliders. When parts are still available, we use PGT OEM sashes, hardware, screens, and weatherstripping. When OEM components are discontinued, we source quality aftermarket glass and rollers that match the original spec. For Felton turnaround, we stock common PGT rollers, latches, and weatherstrip profiles locally, so a slider repair does not wait on a freight shipment. For broader PGT sales & service questions, we are the same crew whether it is one fogged window or a whole-home replacement.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Felton
Cost depends on the unit, the opening condition, and whether we are repairing or replacing. Here is what we typically see across Felton projects:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
An older cabin with rot in the rough opening will cost more than a clean swap on a newer build. The free estimate tells you exactly which situation you have. Call (844) 681-3590 and we will walk the opening with you before we quote a dollar.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, just as we do for PGT service in Ben Lomond. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Felton
In most Felton parcels inside Santa Cruz County’s WUI zone, you need impact-rated or fire-hardened assemblies to meet current code, so standard units often will not pass inspection. We verify your specific parcel’s requirements before recommending a window. Call (844) 681-3590 and we will check your address against county requirements.
If the frame is square and the rollers, track, and latch are the only failures, repair makes sense and usually runs a few hundred dollars. If deck settling has racked the frame or water has rotted the rough opening, replacement often costs less than chasing a warped unit. We will tell you which side of the line you are on during the estimate.
Yes, in most cases. We match the existing PGT profile and sightlines, then re-trim the opening so the new unit sits flush with the surrounding redwood siding. When the original line is discontinued, we find the closest current PGT equivalent and build the trim to cover the difference.
That is a failed insulated glass seal. The desiccant inside the unit has absorbed all the moisture it can, and the seal between the panes is gone, so humidity fogs the interior surface you cannot wipe clean. The fix is a new sealed glass unit, not a cleaning. Call (844) 681-3590 for a replacement quote.
Yes. For Felton projects where window replacement triggers WUI or structural review, we pull the permits, get the inspections, and make sure the final sign-off passes. You deal with one crew, not a different sub for every step.
Service Areas Near Felton
We serve Felton and the surrounding communities, including Felton service area calls that take us across the San Lorenzo Valley. You will also find us in PGT service in Lexington Hills and PGT service in Lompico, where the same sloped-parcel and redwood-canopy conditions apply to PGT windows and doors.
Book Your PGT Service in Felton Today
If your PGT window leaks, fogs, sticks, or will not latch, call (844) 681-3590 for a free estimate. We are an independent PGT service provider in Felton, and we answer when you call.
Written by Noel Carbajal, Owner at Framework Contractors, serving Felton since day one. Build it right the first time – the second time costs twice as much and nobody’s happy.