Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Francisco, CA | Framework Contractors
We provide independent Mr-Glass service across San Francisco, from shower enclosures and bypass closet doors to framed window and patio door units. What sets our Mr-Glass work apart in this city is simple: we understand how pre-1930s wood-frame buildings settle, rack, and shift, and we’ve spent years fitting Mr-Glass products into exactly that housing stock. If your enclosure binds after a soft-story retrofit or your bypass doors jump the track in a 1920s Edwardian, we know why and we fix it right. Call (844) 681-3590 for a free estimate.
Why San Francisco Residents Choose Us for Mr-Glass Service
Most contractors treat a Mr-Glass enclosure like a standalone product. We don’t, because in San Francisco it never is. These units get anchored into settled, often out-of-square framing in buildings that have been standing since the McKinley administration. We’re an independent contractor – not authorized, sponsored, or warranty-endorsed by Mr-Glass – and we’re upfront about that. When an OEM roller or hinge is still available, we use it. When the original series is discontinued, we stock compatible quality aftermarket hardware. But we never hide a bent track or rotted wall behind new rollers. Noel Carbajal, our owner, came up through the trades learning to read structural drawings and framing plans before he ever touched finish glass, and that shows in how we diagnose the whole opening, not just the panel. We serve the full San Francisco service area, including the fog-belt neighborhoods where salt air and damp do their worst.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Francisco
Here’s what we see most often when a San Francisco homeowner calls us about a Mr-Glass product that stopped behaving:
- Corroded hinges and pivots on frameless enclosures. Marine fog-belt damp and salt-laden coastal air corrode the hardware on Mr-Glass frameless shower enclosures long before the glass fails. North- and west-facing baths in the Richmond and Sunset take the brunt of it. We replace the pivots and re-align the panels before pitting spreads to the glass edge.
- Binding sliders after a soft-story retrofit. The Soft-Story Retrofit Ordinance has put thousands of buildings through structural work that re-levels the floors above. Mr-Glass sliders that were plumb for decades bind, jump the track, or leave a widening gap at the strike jamb. We re-frame and re-shim the opening, then re-template the door.
- Chipped glass edges on original builder-grade panels. Older tempered panels chip at the hinge edge and lose their factory seal, letting moisture creep into the coated or laminated edge. We replace the panel and inspect the hinge rail before it turns into a full failure.
- Dropped headers over openings with no wall blocking. In soft-story and pier-and-beam remodels, wall blocking behind the enclosure was often never added when the unit was hung. The header sags and the Mr-Glass door drops out of plumb. We pull the surround, block the opening properly, and re-hang.
- Racked rough openings from decades of settling. 1900s-1930s stick-frame buildings settle unevenly, twisting the rough opening so the enclosure no longer sits square. Shim stacks are a band-aid. We fix the framing and re-template so the glass closes clean.
Mr-Glass Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the thing people don’t realize about San Francisco until it happens to them. The Soft-Story Retrofit Ordinance, which has been running for years now, doesn’t just affect the garage and ground floor. Those retrofits rack and re-level the floors above, sometimes by an inch or more. A Mr-Glass shower enclosure or mirrored bypass door that hung true for twenty years can suddenly bind at the corner, leave a gap at the strike side, or refuse to latch, not because the hardware wore out but because the building itself moved. In neighborhoods like Noe Valley, Bernal Heights, and the Mission, where cramped hillside lots mean your neighbor’s foundation is inches away and the buildings lean into each other, the effect is amplified. Fixing this well means re-plumbing and re-shimming the opening, not just swapping rollers. Any glass company can sell you new hardware. Few in San Francisco take the time to find out why the door stopped working in the first place.
Mr-Glass Models & Products We Service in San Francisco
We work on the full Mr-Glass product range: frameless sliding shower door systems, semi-frameless pivot and hinged shower enclosures, mirrored bypass closet doors, and framed window and patio door units. Our parts approach is deliberate. OEM Mr-Glass rollers, pivots, and hinges are used wherever the series is still in production. Where it’s discontinued, we carry compatible aftermarket hardware that we’ve tested on San Francisco job sites, not just in a catalog. The bigger issue is always the opening. If the rough opening is out of square or the wall blocking was never installed, no roller on earth will make the panel glide right. We fix the framing first, then the glass. That’s the difference between a repair that lasts and one that fails again by the first damp winter.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Francisco
What you’ll pay depends on the scope of the work, not the ZIP code. A simple shower replacement runs less than a full tub-to-shower conversion with structural blocking. Here are the ranges we work with for Mr-Glass in Mission District and across San Francisco:
| Service | Typical San Francisco Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
| Bathroom Vanity Installation | $945 – $3,540 |
Your free estimate includes a look at the opening, the framing behind it, and the condition of the existing hardware. We give you a written line-item quote, not a ballpark. Call (844) 681-3590 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re a General Contractor in San Francisco and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Francisco
Because the retrofit re-leveled the floor above, and that shifted the rough opening the enclosure was hung in. The door no longer sits plumb, so it binds at the corner or leaves a gap at the strike. The fix is to re-frame or re-shim the opening and re-template the door for our Mr-Glass service in Noe Valley and nearby areas to the corrected plane. Hardy hardware alone won’t solve it. Call (844) 681-3590 and we’ll tell you exactly what the opening needs.
Can a Mr-Glass frameless enclosure hold up on a fog-belt north-facing bathroom wall in the Outer Sunset?
It can, but the hardware takes a beating. Salt-heavy coastal damp corrodes hinges, pivots, and bottom rails long before the glass shows wear. We recommend corrosion-resistant aftermarket pivots on north- and west-facing baths near the fog belt, and we seal the edges more aggressively than standard practice. The glass itself will be fine. The metal is what fails first.
What happens if we order a stock Mr-Glass enclosure for a 1920s Mission District bathroom?
You might get lucky, but usually the rough opening is nowhere near square after a century of settling on soft ground. Stock units assume a level, plumb opening. In a 1920s Mission District flat, the floor may be three-quarters of an inch out, and the walls may lean. A stock panel will bind or gape. We template custom cut Mr-Glass glass to the corrected framing instead. It costs a little more than a box unit. It works, which a box unit may not.
Does converting a tub to a walk-in shower in San Francisco require a permit?
In most cases yes. San Francisco DBI requires permits when you alter plumbing, move a drain, or change the waterproofing envelope of a wet area. We pull permits and close them with inspections. A straight glass-panel swap usually doesn’t need one. If you’re anywhere near a historic district, assume Planning will want a look. Call (844) 681-3590 and we’ll tell you what applies to your building.
Are you authorized by Mr-Glass?
No, we are not authorized, sponsored, or warranty-endorsed by Mr-Glass. We’re an independent contractor who has spent years fitting Mr-Glass products into San Francisco’s pre-war housing stock. That independent status means we tell you honestly when an OEM part is the right call and when an aftermarket option is actually better for the conditions in your building.
Service Areas Near San Francisco
Our Mr-Glass service covers all San Francisco ZIP codes, including 94139, 94140, 94141, and 94142. We also handle Mr-Glass service in Chinatown and Mr-Glass service in Tiburon. If you’re just across the bridge or up the coast and your Mr-Glass enclosure is failing, call us. For the full scope of what we offer, see our Mr-Glass sales & service page.
Book Your Mr-Glass Service in San Francisco Today
If your Mr-Glass shower door binds, your bypass closet doors jump the track, or your patio door won’t latch, let’s get it squared away before the next damp winter settles in. Call (844) 681-3590 to schedule your free estimate. We’ll come out, measure the opening, and tell you precisely what’s wrong and what it’ll take to fix it.
Written by Noel Carbajal, Owner at Framework Contractors, serving San Francisco and the wider Bay Area for nearly three decades. Build it right the first time – the second time costs twice as much and nobody’s happy.