Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood Shores, CA | Framework Contractors
We provide independent Mr-Glass service across Redwood Shores, from frameless shower enclosures to mirrored closet packages. We also offer San Carlos Mr-Glass service for nearby homeowners. What makes our work different here is simple: this city sits on engineered fill and drained marsh, so we check floor level, wall plumb, and curb parallel before we ever template a panel. If you need Mr-Glass repair or replacement in the 94065, call (844) 681-3590 for a free estimate.
Why Redwood Shores Residents Choose Us for Mr-Glass Service
We’ve spent years specifying and installing Mr-Glass enclosures, mirrors, and glazed assemblies across the engineered-fill subdivisions of Redwood Shores. That means we know how these products actually fail in bayfront conditions, not just how they look in a catalog. Noel Carbajal, our owner, grew up learning construction the hard way: weekends patching stucco with his uncle, then a Construction Technology program at Santiago Canyon College, then nearly three decades of remodeling across California. He’s built a team that treats every shower enclosure like it has to survive salt air, fog cycles, and a house that might settle a quarter inch after we leave. If you need a General Contractor in Redwood Shores, our crew brings that same care to every project.
We are an independent contractor, not authorized, sponsored, or endorsed by Mr-Glass. We say that plainly because the work should stand on templating and installation, not a badge. When you hire us, you get Mr-Glass sales & service experience backed by real field knowledge of how these units hold up in Redwood Shores specifically. We carry OEM-compatible parts, we stock coastal-grade hardware as the default, and we show up with a laser level, not a tape measure and a guess.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood Shores
- Salt-air corrosion on hinges and handles. Bayfront air off the San Francisco Bay carries salt and moisture that eats at Mr-Glass hinge plates, pivot pins, and handle hardware years ahead of inland installations. The first sign is usually a brown bleed at the glass edge before the hinge itself shows rust. We replace with marine-grade stainless hardware that’s built for exactly this environment.
- Settling walls that rack the opening. Redwood Shores homes sit on engineered fill that moves differentially over time, especially near the lagoons and bay edge. When a wall settles even slightly, the header and curb stop being parallel, and sliding bypass doors jump track or bind mid-glide. We re-square the opening and re-hang the door on adjusted rollers, or we template a custom panel if the stock unit can’t be made to fit.
- Fog-driven moisture degrading seals and backer. Persistent fog and poor bath ventilation in older Redwood Shores tract homes mean silicone seals and curb backer break down faster than you’d expect. Enclosures that look fine from the outside leak at the bottom corner after a few winters. We strip the old seal, replace the backer if needed, and re-seal with materials that handle high humidity cycles.
- Discontinued hardware on 1980s-1990s builder units. Many original Mr-Glass installations in Redwood Shores are now 25 to 40 years old. The roller and pivot hardware from those series is discontinued, and matching it 1:1 isn’t possible. We use OEM hardware where the series is still supported, quality aftermarket stainless or marine-grade replacements where it isn’t, and we tell you honestly which path makes sense.
- Sticking doors from slab-edge settlement. Homes near the lagoons often show settlement cracks and doors that stick as the fill under the slab edge compacts. A shower enclosure anchored near an exterior wall sits on that same fill. We check floor level at the curb before recommending repair or replacement, because a door that binds today will keep binding unless the opening itself is corrected.
Mr-Glass Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores was drained marsh built up with engineered fill starting in the 1960s. The entire neighborhood, from the lagoon-side townhomes off Redwood Shores Parkway to the single-family tracts north of the Oracle corridor, sits on ground that was never naturally stable. The water table here is high, the fill moves differentially, and that shows up in bathrooms as curbs that settle, walls that drift out of plumb, and openings that are no longer square. A stock-sized Mr-Glass panel ordered off nominal dimensions won’t close in a settled bayfront bath. So before we template any enclosure, we laser-check the curb, the walls, and the header. Then we decide whether a stock unit can be made to work, whether we need a custom-cut panel, or whether the opening itself needs re-squaring first. This is the single most important thing to know about Home Remodeling in Redwood Shores, and it’s the standard we follow for every Mr-Glass installation.p most contractors skip.
Mr-Glass Models & Products We Service in Redwood Shores
We service the full range of Mr-Glass product lines found in Redwood Shores homes: frameless hinged shower enclosures in 3/8-inch tempered glass, sliding bypass tub and shower doors, neo-angle corner units for tight tract baths, and mirrored closet and vanity glass packages. For parts, we use OEM Mr-Glass hardware where the series is still supported, and marine-grade aftermarket replacements where it isn’t. We keep common rollers, pivot pins, and handle sets on hand for fast turnaround across Redwood Shores, so you’re not waiting a week for a part that should have been here yesterday. Our work covers Redwood Shores service area calls from initial inspection through final seal.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood Shores
What you’ll pay depends on the scope: a simple re-seal and hardware swap sits at the low end, while a full frameless enclosure replacement with custom-cut glass and marine-grade hardware lands higher. Here’s a clear breakdown of the most common Mr-Glass jobs we handle in Redwood Shores:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
A free estimate from us includes a site check of your floor level, wall plumb, and existing hardware condition. Nothing gets templated until we know exactly what we’re working with. Call (844) 681-3590 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood Shores
Your home sits on engineered fill that settles differentially over time, and when the slab edge or exterior wall settles, the header and curb stop being parallel. The door then binds mid-glide or jumps the track. We fix it by re-squaring the opening, adjusting or replacing rollers, and re-hanging the door on a true line. Call (844) 681-3590 for an inspection and exact quote.
Yes. Salt-laden air from the San Francisco Bay accelerates corrosion on hinge plates, pivot pins, and handle hardware, often showing as brown bleed at the glass edge before the hinge itself fails. We default to marine-grade stainless replacement hardware in Redwood Shores because it’s the only thing that holds up out here.
It depends on the condition of the frame and the opening. If the glass is sound and the opening is still square, a hardware replacement and re-seal can buy years. If the frame is corroded, the rollers are discontinued, and the walls have racked, replacement is usually the smarter money. We’ll tell you straight which path makes sense after a site check. Call (844) 681-3590 to set one up.
Indirectly, yes. The high water table in Redwood Shores means the engineered fill under your home stays saturated and moves differentially. A shower enclosure anchored near a slab edge or exterior wall sits on that fill. We check floor level and wall plumb at the curb before templating, because a stock-sized panel won’t close in a settled bayfront bath.
Most tub-to-shower conversions that don’t move plumbing or alter the drain location don’t require a permit, but any change to the plumbing or wall structure does. We pull permits when the job calls for it and we handle the inspection process. Call (844) 681-3590 for a free estimate that covers exactly what your project needs.
Service Areas Near Redwood Shores
We serve Redwood Shores and the surrounding bayfront and mid-Peninsula communities. Our crews regularly work in Mr-Glass service in Belmont and Mr-Glass service in Foster City, along with San Carlos, San Mateo, and Menlo Park. If you’re within a short drive of the 94065, we can usually reach you without a long lead time.
Book Your Mr-Glass Service in Redwood Shores Today
If your Mr-Glass enclosure is corroding, binding, leaking, or just showing its age, we’ll send a crew that knows Redwood Shores conditions before they even pull up. Call (844) 681-3590 for a free estimate. We’ll check the opening, give you a straight answer on repair versus replacement, and quote a number that holds.
Written by Noel Carbajal, Owner at Framework Contractors, serving Redwood Shores and the surrounding bayfront communities.