Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Los Altos, CA | Framework Contractors
We provide independent Mr-Glass service and installation across Los Altos: shower enclosures, tub-to-shower conversions, walk-in showers, and framed or frameless glass replacements. What makes our work different here comes down to one thing most contractors miss: because Los Altos caps lot coverage at 45%, nearly every remodel stays inside the existing footprint, so enclosure openings are almost never a stock size. That means on-site templating, not catalog ordering. Call (844) 681-3590 for a free estimate.
We are an independent contractor and are not authorized, sponsored, or endorsed by Mr-Glass. But our crew has installed and serviced their frameless and semi-frameless lines through hundreds of Bay Area remodels, and we know how those enclosures actually behave once a Los Altos ranch home settles and shifts. If you’re weighing repair against replacement, or planning a bath remodel and want the glass done right, this page tells you what actually happens on the ground here. For the full picture on our Mr-Glass work, see our Mr-Glass sales & service page.
Why Los Altos Residents Choose Us for Mr-Glass Service
Mr-Glass repair in Mountain View and Los Altos live or die by how well they’re hung, and Los Altos is unforgiving on that front. Most of the housing stock is single-story ranch from the 1950s through the 1970s, and those slabs move. Not dramatically, but enough that hinges drift, pivots bind, and sweeps stop sealing within a few years if they weren’t set with that movement in mind. We template every enclosure to the actual opening, not to the spec sheet, because in this city the spec sheet is usually wrong the day the house finishes settling.
Noel Carbajal, our owner and a General Contractor – Los Altos since 2012, grew up learning finish work the hard way, spending weekends helping his uncle patch stucco and reroof porches before he was old enough to drive. He’s spent the better part of three decades building and remodeling, and his approach to shower glass is the same as his approach to everything else: build it right the first time, because the second time costs twice as much and nobody’s happy. That’s why we use OEM Mr-Glass hinges, pivots, handles, and sweeps wherever the model is still supported. It keeps the original fit and the warranty path intact.
Los Altos homeowners tend to research before they call. We respect that. You’ll get a straight answer about whether your enclosure can be saved or needs replacing, and a written line-item quote.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Los Altos
- Frameless panels drifting out of plumb. U-channels and pivot hardware loosen as slab-on-grade ranch floors and door frames move seasonally. The panel starts rubbing, the sweep drags, and eventually the door won’t close without a lift. We pull the hinges, reset the geometry, and re-anchor with hardware sized for the movement.
- Legacy non-tempered glass in original showers. Many 1960s and 1970s Los Altos homes still have their original single-pane aluminum shower enclosures, and that glass is often not safety tempered. It fails current glazing code and should come out during any bath remodel. We handle the removal and replacement with properly tempered Mr-Glass panels.
- Mineral etching and hard water spotting. Drought-restriction water and low-flow fixtures concentrate minerals, and uncoated glass takes the hit. We reseal where the glass is sound and recommend coated or easier-maintenance panels when replacement is the better call.
- Silicone and sweep seal failure from dry summers. Los Altos summers are dry, and silicone shrinks. Then winter rain arrives and the curb leaks. The fix is re-sealing before the wet season, not after water has already found the subfloor.
- Stock-size enclosures that don’t fit remodeled openings. Because most Los Altos work happens inside the existing footprint, bathrooms get reconfigured into odd dimensions. Standard enclosure kits leave gaps or need ugly filler. We template and cut on site to the actual finished opening.
Mr-Glass Service in Los Altos: What Local Conditions Mean for Your Equipment
Here’s the thing about Los Altos that changes how Mr-Glass work gets done: the city caps lot coverage at 45%, and design review scrutinizes second-story additions. That means most of our Mr-Glass jobs come out of interior reconfiguration inside the existing footprint. Knocking out a hall bath, stealing square footage from a closet, converting a tub alcove into a walk-in. Not adding on. The practical result is that enclosure dimensions rarely match any stock size, so every serious job involves templating the finished opening after the walls are set, then cutting panels to match. A generic shower glass company that shows up with a kit will fight the opening all day. We’ve templated openings off Almond Avenue, over near the high school, across the 94022 and 94024 ZIP codes, and the pattern holds: nothing is square, and almost nothing is standard. That’s not a construction defect. It’s what happens when a house built in 1962 gets reworked in 2026 without adding a single square foot. If you’re in the Los Altos service area, that reality applies to you.
Mr-Glass Models & Products We Service in Los Altos
We work on the full Mr-Glass product range you’re likely to find in a Mr-Glass repair in Stanford or Los Altos home: frameless enclosures in both 3/8″ and 1/2″ tempered glass, semi-frameless sliding and pivot doors, custom-cut panels for tub-to-shower conversions, and mirrored or glass wall assemblies for remodeled baths. Where the model is still supported, we source OEM Mr-Glass hardware. Where a discontinued profile makes that impractical, we switch to quality aftermarket components that match the original geometry. We stock common hinge sets, pivots, sweeps, and U-channel profiles locally so service calls don’t drag while parts ship. If your enclosure is pre-2010 and the hardware was discontinued, call us before you tear anything out: sometimes the right aftermarket match costs less than a full replacement and buys the enclosure another decade.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Los Altos
Pricing in Los Altos runs a bit higher than neighboring Peninsula cities, and the reason is mostly labor: glaziers here charge more, and careful templating on odd openings takes time. What you’re paying for is an enclosure that was measured to your actual walls, not pulled out of a box. Here are the ranges we quote most often:
| Service | Typical Los Altos Range |
|---|---|
| Frameless Glass Shower Enclosures | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel (including glass) | $9,000 – $28,000 |
A free estimate includes measuring your actual opening, checking whether the existing glass is tempered, and a straight answer on repair versus replacement. Call (844) 681-3590 and we’ll come look.
Serving Los Altos, CA — Our Local Coverage Area
We’re based in the Los Altos area and know this community well, including nearby Mr-Glass in Loyola. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Los Altos
Usually yes, if the glass is sound and tempered. We routinely re-hinge and re-sweep enclosures after interior walls have been moved or re-squared, and it’s almost always cheaper than a new enclosure. Call (844) 681-3590 if you’re mid-remodel and want us to assess your existing panels before demo.
Slab movement. The 1950s to 1970s ranch homes here sit on slab-on-grade foundations, and seasonal expansion and contraction shifts door frames enough to pull hinges out of alignment over time. The fix is resetting the pivot geometry, not forcing the door.
Indirectly, yes. Since you can’t easily add square footage, the shower gets built inside the space that already exists, which means the finished opening is whatever the reconfiguration produced. That’s why templating matters so much here. We measure after the walls are set, then cut glass to fit.
Tempered glass, which is code for any shower enclosure regardless of WUI status. The wildland-urban interface rules that affect roofing, siding, and vents don’t govern interior shower glass specifically, but a conversion in the foothills often pairs with other fire-hardening work, so we coordinate with our full-scope remodeling crews if your project spans multiple systems.
Reseal before the rains arrive, and re-check hinge tension once a year. Dry air shrinks silicone and loosens hardware, and then the winter rain tests every gap. The pattern is predictable enough that we schedule preventive reseals for clients in Los Altos every fall. Call (844) 681-3590 if your enclosure hasn’t been checked in the last two years.
Service Areas Near Los Altos
We also serve the surrounding Peninsula and South Bay communities, including Mr-Glass service in Los Altos Hills, Mr-Glass service in Palo Alto, Mountain View, Cupertino, and Sunnyvale. If you’re in Los Altos proper, you’re right in the middle of our regular route.
Book Your Mr-Glass Service in Los Altos Today
If your Mr-Glass enclosure is sagging, leaking, or just not closing like it used to, call us. (844) 681-3590
Written by Noel Carbajal, Owner at Framework Contractors, serving Los Altos and the surrounding Peninsula since 2012.