Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Campbell, CA | Framework Contractors
We install and service Mr-Glass shower enclosures, tub doors, mirrors, and storefront glass across Campbell every week as your trusted General Contractor in Campbell. What makes our work here different comes down to one thing: we know what 1950s – 70s Campbell ranchers and old downtown storefronts do to glass and aluminum over time. If you’re planning a frameless Mr-Glass shower in a mid-century bath, or dealing with a corroded track or a panel pulling out of the wall, call (844) 681-3590 for a free estimate.
We are an independent Mr-Glass service provider. We’re not authorized, sponsored, or endorsed by Mr-Glass, and we don’t claim to be. What we do claim is hands-on familiarity with the product line: frameless enclosures, semi-frameless sliding doors, custom mirrors, and commercial storefront systems. We work on them daily in Campbell zip codes 95008, 95009, and 95011, and we also offer Saratoga Mr-Glass service nearby.
Why Campbell Residents Choose Us for Mr-Glass Service
Campbell’s housing stock runs heavy to postwar single-story ranchers and tract homes, with craftsman bungalows and small Victorians clustered near Campbell Avenue. A lot of those homes still carry original bath framing: no blocking behind the tile, walls that have drifted out of plumb over decades, shallow slab or raised foundations that don’t hold a level line. Stock glass enclosures fight those conditions. We don’t.
Noel Carbajal grew up learning construction the hard way: helping his uncle patch stucco and reroof porches on weekends before he was old enough to drive. He studied Construction Technology at Santiago Canyon College and has spent decades building and remodeling across the Orange County corridor. That background matters here because we approach every Mr-Glass job the way we’d approach any structural problem: measure the opening, check the wall behind the tile, and build the support before we hang glass on it. Build it right the first time – the second time costs twice as much and nobody’s happy.
We use genuine Mr-Glass hardware and replacement panels where the factory part is still made. When an OEM hinge, roller, or seal is discontinued or back-ordered, we source quality aftermarket equivalents and tell you exactly what we’re installing and why. The glass itself is always correctly tempered and specified to match the original thickness.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Campbell
- Frameless shower panels pulling out of the wall. Original 1950s – 70s Campbell baths usually had no solid blocking installed behind tile before the first enclosure went in. We open the wall, add proper backing, and re-set the panel so it’s anchored into structure – not drywall.
- Semi-frameless sliding door rollers and bottom tracks corroding and dragging. In older Campbell homes where the bath exhaust was never upgraded, moisture sits on the aluminum tracks and rollers. We replace the worn hardware and address the ventilation issue so the new parts don’t fail in three years.
- Tempered glass failing at hinge cutouts and edges. Mid-century walls are often uninsulated. Decades of thermal cycling stress the glass near the cutouts, and one day it lets go. We replace panels with correctly tempered glass spec’d to the original thickness and re-hang on fresh hardware.
- Out-of-square openings causing gaps and seal failures. A stock Mr-Glass panel forced into a wall that isn’t plumb will bind, gap, or leak at the seals. We custom-measure and shim every opening, and when the framing itself is the problem, we fix the framing before we install glass.
- Mirrored closet doors and mirrors delaminating or chipping in remodeled ranch homes. Older adhesives fail, and the glass picks up edge chips during renovations. We remove and replace with new Mr-Glass mirrored doors cut to fit existing openings.
Mr-Glass Service in Campbell: What Local Conditions Mean for Your Equipment
Here’s what most pages won’t tell you. Campbell splits into two very different building zones, and your Mr-Glass installation lives on one side or the other. The west side and downtown-adjacent lots sit on expansive clay and high groundwater near the Los Gatos Creek and percolation-pond corridor. Those soils move. Floors settle, walls drift out of level, and openings that were square in 1963 are trapezoids in 2026. So a bath or shower remodel in those neighborhoods – and specifically the frameless Mr-Glass enclosure that goes in at the end – has to be custom-measured and shimmed, not set to a stock opening. The flat east-side tracts don’t show the same movement. A crew that only ever worked the east side might not catch a quarter-inch drift in a west-side wall until the enclosure door binds. We’ve seen it. We check for it before we order glass.
On a bath remodel off Campbell Avenue near the old downtown core, we found the floor and one wall out of level – a clay-soil settlement pattern we see on that side of town. A stock Mr-Glass frameless panel wouldn’t fit the opening. We reframed and added solid blocking, then custom-measured a 3/8″ Mr-Glass frameless enclosure with aftermarket bottom seals to handle the slight out-of-square. The doors close clean and seal tight.
Mr-Glass Models & Products We Service in Campbell
We work on the full Mr-Glass residential and commercial line. That includes 3/8″ and 1/2″ frameless tempered glass shower enclosures for bath remodels, semi-frameless sliding tub and shower doors, custom mirrors and mirrored closet doors, and storefront commercial glass systems for downtown Campbell Avenue retail. For Mr-Glass sales & service questions, we’re happy to tell you whether a repair or a full replacement makes sense for your specific enclosure.
We stock the most common Mr-Glass replacement parts locally: hinges, rollers, seals, and bottom sweeps for semi-frameless doors. Full replacement panels are ordered to spec – correctly tempered, correct thickness, correct edge profile. When an OEM part is discontinued, we source aftermarket hardware that meets the same spec, and we tell you before we install it.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Campbell
Pricing for glass work in Campbell tracks closely with the scope of the surrounding bath remodel. A walk-in shower installation runs $4,500 – $12,000, depending on whether we’re working in an existing opening or reframing a larger space. Here’s how the common line items break down:
| Scope | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What actually moves the number: whether we’re reframing an out-of-level opening, adding blocking behind tile, correcting a ventilation problem, or replacing rotten framing. A free estimate tells you exactly what your job needs. Call (844) 681-3590 and we’ll come measure the opening and give you a written line-item quote.
Serving Campbell, CA — Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Campbell
Yes. An out-of-level floor is common on Campbell’s west side and downtown-adjacent lots due to expansive clay and groundwater movement, and we handle it by custom-measuring every panel and shimming or reframing the opening before glass goes in. The enclosure ends up square and sealed even when the original walls aren’t. Call (844) 681-3590 and we’ll assess your specific opening for free.
Usually yes. If the glass is intact and the frame behind it is solid, we replace the worn hardware – genuine Mr-Glass where available, quality aftermarket where OEM is discontinued – and re-hang the existing panel. If the wall or frame is failing, we’ll tell you honestly whether a targeted repair will hold.
Yes. A tub-to-shower conversion in Campbell involves plumbing and drain configuration changes, which requires a permit through the City of Campbell. We pull the permits, schedule the inspections, and handle the paperwork, so the work is done to code and documented.
Most frameless Mr-Glass shower enclosure installations take one day once the tile and framing are complete. That includes final measuring, hardware mounting, panel setting, and seal application. If we have to open walls to add blocking, that adds time on the front end, not during the glass phase.
Yes, with the right layout. Frameless glass makes a small bath feel larger because it removes the visual wall of a framed enclosure. We regularly install 3/8″ Mr-Glass frameless panels in compact ranch-house baths. The opening just has to be measured exactly. Call (844) 681-3590 for a free in-home measurement and quote.
Service Areas Near Campbell
We serve Campbell service area neighborhoods and the surrounding cities: Santa Ana, Tustin, Orange, North Tustin, Garden Grove, and Fountain Valley. For clients in adjacent communities, see our Mr-Glass service in Buena Vista page or our Mr-Glass service in San Jose page.
Book Your Mr-Glass Service in Campbell Today
We provide independent Mr-Glass construction service across Campbell and Mr-Glass in Monte Sereno, and we’re available to measure, diagnose, and quote your job now. Call (844) 681-3590 for a free estimate.
Written by Noel Carbajal, Owner at Framework Contractors, serving Campbell since 2010.