Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Communications Hill, CA | Framework Contractors
We’re Framework Contractors, and we provide independent Jerith fence, gate, and railing installation and repair across Communications Hill, CA. What sets our Jerith work apart here is simple: we know what happens when aluminum posts get set into the quarry fill this hill was built on. Most crews treat a fence like a fence. On The Hill, it’s a plan-check, HOA-review, and footing-engineering exercise before the first hole is dug. Call us at (844) 681-3590 to talk through your project.
Why Communications Hill Residents Choose Us for Jerith Service
Jerith aluminum fencing is common on Communications Hill because the Mediterranean and Spanish-revival tracts here call for ornamental metal, not wood privacy screens. We’ve worked with the Classic, Industrial, Regis, and Majestic lines long enough to know which hinges fail first, which post depths hold, and which profiles are still in production when a replacement picket is needed. Noel Carbajal grew up working stucco and roofing as a kid in Santa Ana, then studied Construction Technology at Santiago Canyon College. That background matters when a Jerith run on a graded terrace needs more than a part swap: it needs footings that won’t migrate, drainage that won’t scour, and hardware rated for ridge wind. We’re an independent contractor, not affiliated with or authorized by Jerith. That means we tell you straight when an OEM part is the right call and when an aftermarket component will do the job without the wait.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Communications Hill
- Racked panels and sagging gates from shallow footings. The graded terraces cut into this old quarry ridge routinely hide imported fill and buried debris at two to three feet. When a post goes into that loose material, it settles. The panel goes out of plumb. The gate drags. We probe before we dig so the footing depth matches what’s actually down there.
- Hinges and latch strikes that give out after winter storms. The ridge above the Santa Clara Valley takes more wind than the flats below, and a Jerith gate catches that wind like a sail. Undersized or corroded hinge hardware fails first. We swap in OEM Jerith hinges and latch strikes so the gate swings true and catches clean.
- Post anchors loosening along slope-edge yards. Rainy-season runoff on Communications Hill runs downhill fast. Where a Jerith railing sits at the edge of a slope, water scours around post collars and works the concrete loose. We tie the post base to the drainage flow so the anchor isn’t fighting the hill every winter.
- Fence-to-wall connections pulling free from stucco. Most of the housing stock here is 1980s to 2000s stucco. Where a Jerith fence terminates into a stucco wall, wind-driven vibration on the exposed ridge works undersized fasteners loose, and the connection point corrodes. We replace those terminations with anchors sized for the exposure.
- Rusted hardware on otherwise sound panels. Salt air isn’t the problem on Communications Hill. Sun and rain cycling are. Brackets and screws corrode while the aluminum pickets stay fine. Often the fix is new hardware, not new fence, and we’ll tell you that plainly.
Jerith Service in Communications Hill: What Local Conditions Mean for Your Equipment
Communications Hill was cut into a former IBM disk-drive plant site and an old quarry. That’s not history trivia; it’s the single biggest factor in whether your Jerith fence stays square. The terraced lots here sit on imported fill mixed with construction debris from the 1980s and 1990s development phases. A standard two-foot post hole that passes on the valley floor in Almaden will often hit loose fill, broken concrete, or buried scrap at 30 inches on The Hill. When that happens, the footing won’t hold, the panel racks, and the gate won’t latch after a storm. We don’t guess. We probe every post location before we commit to a depth. On a terrace lot near the Village Center, a homeowner’s Jerith Industrial aluminum run along the slope edge had racked and blown a gate latch after a winter storm. Our probe hit loose imported fill at about 30 inches. We reset the corner posts on deeper concrete footings tied to the drainage swale, swapped the failed hinges and latch for OEM Jerith hardware, and re-hung the gate so it clears the terrace grade through its full swing. That’s the difference between a fence that lasts and one that needs love every spring.
Jerith Models & Products We Service in Communications Hill
We install and repair the Jerith Classic ornamental aluminum fence, the Jerith Industrial grade line, the Jerith Regis aluminum railing series, and the Jerith Majestic aluminum fence. When a profile is still in production, we match OEM Jerith posts, pickets, brackets, and hinge hardware so the sections stay square and the finish matches. For discontinued styles, we go to a quality aftermarket source and tell you upfront which parts will differ before you commit. You’ll find more detail on our Jerith sales & service page, but the short version for Communications Hill is this: we stock common Jerith hardware local to 95136 so a hinge or latch swap doesn’t take a week.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Communications Hill
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
The free estimate includes a site walk, a probe of the post locations, and a written line-item quote. No change orders once we start unless the hill surprises us and we show you the evidence. Call (844) 681-3590 to schedule yours.
Serving Communications Hill, CA — Our Local Coverage Area
We’re based in the Communications Hill area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Communications Hill
Usually both. Most of the parcels here are in a PUD with CC&Rs and an architectural review committee, and the City of San Jose has hillside grading rules that apply to fence and railing work on graded terraces. We’ll handle the HOA submittal and the plan check as part of the job. Call (844) 681-3590 and we’ll tell you exactly what your lot triggers.
Because the hill is built on imported quarry fill, not natural soil. When posts are set at a standard two-foot depth into loose fill or buried construction debris, they settle seasonally and the aluminum panels rack with them. We probe each hole and go deeper or call for a geotech note when the fill won’t hold. Give us a call at (844) 681-3590 for an onsite look.
We can match OEM Jerith in Seven Trees posts, pickets, and hardware whenever the profile is still in production. If the style is discontinued, we source quality aftermarket parts and tell you plainly which components will differ before we order anything. Text or call (844) 681-3590 with a photo of your fence and we’ll identify the line fast.
Yes. Runoff scours around post collars and undermines concrete on slope-edge yards, which is why railing anchors loosen over repeated rainy seasons. The fix is footings tied to the drainage flow, not just deeper holes. If your railing rocks or your gate won’t catch after a storm, call (844) 681-3590 for a fix that holds.
We handle it. Jerith in Buena Vista and Communications Hill HOAs want plans, finish samples, and a spec sheet before they approve a fence or railing. We pull the package together, submit it, and track it through approval so you aren’t the one chasing a committee. Call (844) 681-3590 and we’ll walk you through the timeline for your tract.
Service Areas Near Communications Hill
We run Jerith fence and railing work through the neighboring communities as well. If you’re in Cambria Park or Brookdale, see our Jerith service in Cambrian Park page or our Jerith service in Brookdale page. Our broader coverage area is mapped on the Communications Hill service area page.
Book Your Jerith Service in Communications Hill Today
If your Jerith gate drags, your panels are racked, or you’re planning a new fence on a graded terrace, call us at (844) 681-3590. We’ll come out, probe the ground, and give you a written quote that accounts for what’s actually under your lot. Free estimates, no obligation.
Written by Noel Carbajal, Owner at Framework Contractors, serving Communications Hill and the South Bay since 1995.