Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Pomona, CA | Framework Contractors
We provide independent CWS window and door service across Pomona, our General Contractor in Pomona team checks the opening before we touch the unit. In Pomona’s mid-century tracts especially, clay-soil movement racks window frames out of square, so the real fix usually starts behind the trim, not at the sash. Our crew has repaired and replaced CWS aluminum sliders, single-hungs, and patio doors in homes from the 91766 flats to the older blocks near downtown, and we’re not affiliated with or authorized by CWS – we’re an independent contractor who knows how these units actually age in inland-valley heat. Call (844) 681-3590 for a free estimate, and we’ll give you an honest repair-versus-replace call before any work starts.
Why Pomona Residents Choose Us for CWS Service
Noel Carbajal grew up helping his uncle patch stucco and reroof porches in Santa Ana on weekends, and he’s spent the better part of three decades building and remodeling across the Orange County corridor and into the Pomona Valley. His two sons have both worked summers on his crew, and the older one stayed on full-time. That’s the kind of company we are: we show up with a plan and we leave the site cleaner than we found it.
For CWS work specifically, Pomona homeowners call us because we don’t treat a sticking slider or a fogged dual-pane as an isolated part problem. We look at the sill, the rough opening, the flashing, and what the clay soil under the slab has been doing for the last forty years. We source CWS sales & service parts like OEM sashes, rollers, weatherstripping, and locks where they’re still available, and we use quality aftermarket glazing, balances, and seals when CWS has discontinued the line or lead times would stall your job. Build it right the first time – the second time costs twice as much and nobody’s happy.
Styles & brands we work with
Common CWS Construction Problems We Solve in Pomona
- Heat-driven seal failure and fogging on dual-pane units. South- and west-facing CWS windows across the 91766 and 91767 tracts bake under long summer sun. Seals fail, argon leaks out, and you get that cloudy film between the panes that never wipes clean. We re-glaze when the frame is sound and replace the sash or full unit when it isn’t.
- Clay-soil settlement racking window and door openings. Pomona sits on expansive San Gabriel Valley clay that swells in winter rains and shrinks through the dry season. That cycle pulls door and window rough openings out of square, so CWS aluminum sliders bind, locks misalign, and weatherstripping tears away at the corners.
- Santa Ana wind damage to sliders, tracks, and glazing seals. The fall wind events hit exposed elevations hard, especially on hillside lots where there’s no windbreak. Rollers loosen, tracks fatigue, and seals that were already brittle from heat finally give way.
- Corrosion and pitting on older aluminum CWS frames. Near grade or under failing exterior paint, aluminum frames oxidize, pit, and eventually let water in at the sill and frame joints. We catch this early and repair the opening before installing new units.
- Misaligned locks and failed weatherstripping on aging sliders. Often these are symptoms of the settlement issue above, but sometimes it’s just thirty years of wear. We’ll tell you which one you’re dealing with and what it costs to fix either way.
CWS Service in Pomona: What Local Conditions Mean for Your Equipment
Here’s the thing most window contractors won’t tell you, and it’s the main reason our CWS work in Pomona looks different from CWS in La Verne or nearby cities. Pomona’s mid-century tracts are built on expansive San Gabriel Valley clay, and the annual cycle is brutal: winter rains swell the soil, summer heat bakes it dry and hard, and the slab doesn’t stay perfectly flat through any of it. We see the results every week – door openings that measure a quarter-inch wider at the top than the bottom, window sills that slope toward the glass, sashes that close fine in January and jam in August. When we replace CWS windows here, we re-check and shim the rough opening before the new unit goes in. Sometimes that means addressing sill rot or a low corner of the foundation first. Dropping a new window into a racked opening without fixing the frame underneath just means you’ll be calling us again in five years. In the 91768 blocks near Ganesha Park and the older streets off Holt, we’ve found this to be true almost without exception.
CWS Models & Products We Service in Pomona
The CWS aluminum single-hung and slider windows that went into Pomona’s 1950s-70s tract homes are workhorses of a kind, but they were never built for five decades of inland heat. We service those, along with CWS vinyl double-hung replacement units, CWS sliding glass patio doors, and the fixed and sliding aluminum windows common in older downtown-adjacent homes. When OEM parts exist, we use them. When they don’t, we use better-than-builder-grade aftermarket hardware – glazing, balances, seals, rollers – that’s proven to hold up in Pomona’s specific climate. We keep common CWS-compatible parts stocked for fast turnaround across the 91766, 91768, and 91797 ZIPs, so a repair doesn’t spiral into a weeks-long parts hunt.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Pomona
What you’ll pay depends on whether we’re repairing hardware and seals or replacing full units, and on how much opening prep the soil settlement has left us with. Here’s what to expect for the CWS-related work we do most in Pomona:
| Service | Typical Pomona Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
These ranges cover typical Pomona homes – mid-century tract fixer-uppers to older craftsman houses near downtown. The final number moves with the scope: how many units, whether the rough openings need shimming or sill repair, and whether you’re swapping like-for-like or upgrading to impact-rated low-E glass. Every estimate is free, written, and line-itemed, and we don’t change the number once work starts unless you change the scope. Call (844) 681-3590 for a quote specific to your house – we’ll come look at the openings, not just the windows.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Pomona
Repair makes sense if the frame is still square and the issue is worn rollers, failing weatherstripping, or misaligned locks – that’s a few hundred dollars in parts and labor, not thousands. Replacement is the call when the rough opening has racked from clay-soil settlement or the aluminum frame has corroded at the sill, because re-hardwaring a racked frame won’t fix the underlying problem. We’ll measure the opening, check the slab on that wall, and tell you which one you have. Call (844) 681-3590 for a free evaluation.
Yes – south- and west-facing CWS dual-pane units in Pomona routinely fail seals after 15-20 years, and sometimes sooner, because the inland-valley summer pushes glass and frame temperatures higher than coastal installs ever see. The seal degrades, condensation forms between panes, and the insulating gas escapes. We address this with re-glazing where the frame is still good, or a full sash/unit swap to low-E dual-pane when it isn’t.
Yes. We’ve done it on craftsman-era houses near downtown where the original trim and casings matter to the homeowners, and the approach is the same every time: set the new unit into the existing opening with minimal trim disturbance, preserve what’s sound, and re-flash properly so the old wood doesn’t rot behind the new window. Where the trim is too far gone, we’ll tell you before we cut anything.
Yes, on both counts. Low-E dual-pane replacement units cut heat gain dramatically compared to old single-pane aluminum, and proper flashing plus fresh weatherstripping keeps Santa Ana wind from whistling through the sashes. On a 1960s tract home off the 91767 blocks near downtown Pomona, our crew found Los Serranos CWS service style aluminum sliders sticking and fogged panes leaking summer heat, with the openings visibly out of square from clay-soil settlement. We leveled and re-shimmed the rough openings, then installed new low-E dual-pane units with fresh flashing and seals – the homeowners got sliders that actually close flush and a noticeably cooler west-facing room.
Pomona has its own building department and does require permits for window replacement when you’re changing the rough opening or when the work touches structural elements like headers or sill plates. A like-for-like sash swap usually doesn’t trigger permitting, but a full frame replacement often does. We pull permits when they’re required and we pass inspections before we call the job done. Call (844) 681-3590 and we’ll tell you what your specific project needs.
Service Areas Near Pomona
We take CWS window and door calls throughout the Pomona Valley and across the county line. That includes our Pomona service area – all four ZIPs: 91766, 91767, 91768, and 91797 – plus CWS service in Eastvale to the east and CWS service in Montclair just to the north. If you’re in Santa Ana, Tustin, Orange, North Tustin, Garden Grove, or Fountain Valley, we cover those corners of Orange County too.
Book Your CWS Service in Pomona Today
If your CWS windows are sticking, fogged, or leaking air this summer, call (844) 681-3590. Our estimates are free, our work is permitted, and we’re in Pomona every week.
Written by Noel Carbajal, Owner at Framework Contractors, serving Pomona, CWS service in Claremont, and the Pomona Valley.