Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Ben Lomond, CA | Framework Contractors
We’re an independent contractor that’s worked extensively with CWS kitchen and bath products across the Santa Cruz Mountains, including a good number of CZU rebuilds. If you own a home in Ben Lomond with CWS cabinetry or millwork, we repair, reface, install, and replace it. The thing that sets our CWS work apart here is that we know what mountain humidity, wildfire code, and steep hillside lots do to cabinet boxes and drawer glides. Call (844) 681-3590 for a free estimate on any CWS cabinet or countertop project in Ben Lomond.
Why Ben Lomond Residents Choose Us for CWS Service
Noel Carbajal started our shop because he got tired of seeing cabinet installs fail early in mountain climates. He grew up working stucco and roofing with his uncle, then did the Construction Technology program at Santiago Canyon College before spending three decades building and remodeling across California. These days he checks every CWS job we do in Ben Lomond personally, because he knows what happens when you cut corners on a hillside lot. We’re not a CWS dealer and we don’t pretend to be. We’re the crew that fixes what the manufacturer’s warranty doesn’t cover, and installs CWS products so they stay square in a house that shifts with the seasons.
Styles & brands we work with
Common CWS Construction Problems We Solve in Ben Lomond
- Cabinet box swelling and delamination. Old redwood-era cabins in Ben Lomond leak. Roof leaks, window leaks, deck flashing failures. When water gets into CWS particleboard boxes or even plywood sides over months, the box swells and the laminate peels. We see this constantly in homes off Highway 9 that haven’t had a roof replacement since the 1980s.
- Drawer glide failure in CWS ValueLine cabinets. The ValueLine series uses particleboard with stapled construction and basic epoxy-coated glides. In a kitchen that gets daily use for ten or fifteen years, those glides wear out and drawers start to stick or sag. Heavy pots and pans accelerate it.
- Hinge sag and face-frame separation. Ben Lomond’s winter humidity swings are hard on wood. Cabinet doors swell, then dry out in summer’s heat. Hinges loosen, screws strip out of particleboard, and doors stop closing flush. The fix is usually new OEM or better aftermarket hinges, not a cabinet replacement.
- Finish peeling and UV warping on doors near large windows. South-facing kitchens in Ben Lomond get intense summer sun. CWS doors with a standard lacquer finish can peel or yellow after five or six years of direct exposure. Refacing with a UV-stable finish solves it without replacing the boxes.
- Countertop seam separation over wet or uneven framing. Hillside homes in Ben Lomond settle. Pier-and-beam foundations move seasonally as the clay soil expands and contracts. When CWS laminate tops are installed over unshimmed or uneven cabinets on a sloping lot, seams open up and the substrate swells under sinks and dishwashers.
CWS Service in Ben Lomond: What Local Conditions Mean for Your Equipment
Here’s the thing that most generic cabinet advice misses. Ben Lomond’s 95005 sits inside Cal Fire’s Very High Fire Hazard Severity Zone, which means any CWS kitchen remodel here has to use ignition-resistant materials and ember-resistant venting for cabinets, range hoods, and any combustible millwork within proximity to a heat source. Those requirements don’t apply down in Felton or Scotts Valley the same way. It also means that every CWS cabinet run we install on Bear Creek Road or up near Alba Road has to be shimmed and leveled against a floor that’s rarely flat. A cabinet box racked by even a quarter-inch over eight feet will bind drawers and crack face frames inside a year. Add Ben Lomond’s winter rainfall on steep terrain, and drainage around the foundation matters as much to a kitchen cabinet’s lifespan as the hinges we choose. We plan for all of it before the first box comes off the truck.
CWS Models & Products We Service in Ben Lomond
We work on every CWS line that’s sold and installed around the Santa Cruz Mountains: the CWS Concord series (all-wood construction with dovetail drawers), the CWS Pacific series (plywood boxes with soft-close hardware), the CWS ValueLine (particleboard, stapled construction), and CWS custom maple and oak cabinet lines. When a line’s still in production, we pull OEM hinges, glides, and drawer boxes so the repair matches exactly. For discontinued lines, we source aftermarket hardware that meets or beats the original spec: stainless-steel soft-close glides, solid-brass hinges, and birch or maple drawer boxes with dovetail joinery. We stock common glide sizes and hinge plates on our trucks so a Ben Lomond repair doesn’t mean waiting a week on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Ben Lomond
| Project | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Your free estimate includes a written line-item quote, and the number we give you is the number on the invoice, no change orders sprung mid-job. Call (844) 681-3590 and we’ll walk through what your specific CWS project needs.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well, from CWS in Lompico to the Santa Cruz Mountains. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Ben Lomond
Cabinet boxes themselves aren’t typically required to be noncombustible under Chapter 7A, but certain millwork details like ember-resistant venting for range hoods and spacing of combustible materials near heat sources are. We’ll check your specific kitchen against current Ben Lomond fire code and tell you exactly what needs to change. Call (844) 681-3590 and we’ll take a look.
Depends on the line. Concord and Pacific series cabinets with plywood boxes and dovetail joinery handle mountain humidity swings well. ValueLine particleboard boxes are more likely to swell if exposed to leaks or standing moisture, and their finish fades faster in direct summer sun. We’ll be straight with you about which CWS line makes sense for your kitchen. Call for a free assessment.
In most cases, yes. We’ll match the door style, species, and finish as closely as the current production run allows, and for discontinued lines we work with local mill shops to make doors and drawer fronts that blend with your existing CWS boxes. It’s never a perfect match on a decades-old finish, but we get close enough that most people can’t spot it.
If the boxes are still solid, refacing the doors and drawer fronts costs a fraction of new cabinets and keeps the original CWS layout. If the boxes themselves are swollen or water-damaged from the fire or firefighting, replacement is usually the only sane option. We’ll tell you which road is cheaper for your specific Ben Lomond rebuild, not which one pads our invoice. Call (844) 681-3590 and we’ll help you figure it out.
Yes. We’ve done Brookdale CWS service, Bear Creek Road lots, and plenty of other steep Ben Lomond parcels. We stage tools at the road and carry materials in by hand when the driveway won’t take a truck. It adds a little labor cost, but we’ve never turned down a CWS repair for access reasons.
Service Areas Near Ben Lomond
We cover all of 95005 and the surrounding mountain communities. If you’re in a neighboring area, take a look at our CWS service in Bonny Doon page or our CWS service in Communications Hill page for details. We serve the full Ben Lomond service area, including all the hillside roads and creek lots that make this mountain community what it is. For background on how we approach the CWS product line more broadly, see CWS sales & service.
Book Your CWS Service in Ben Lomond Today
If your CWS cabinets are sticking, swelling, or just looking tired, call us. We’ll send Noel Carbajal or one of our senior crew leads out to Ben Lomond to look at what you’ve got and tell you what it’ll take, honestly and up front. Estimates are free and there’s no pressure. Call (844) 681-3590 now to schedule your CWS service in Ben Lomond.
Written by Noel Carbajal, Owner at Framework Contractors, serving Ben Lomond and the Santa Cruz Mountains.