Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Temecula, CA | Framework Contractors
We provide independent CGI cabinet and building product service across Temecula, from full kitchen remodels to single-door replacements in 1990s tract homes, and our Murrieta Hot Springs CGI service covers the same builder-grade lines. What separates our CGI work here is parts access: we keep discontinued CGI door profiles and hinge patterns in stock because Temecula’s 1985 – 2005 subdivisions were built with them as original equipment. Call (844) 681-3590 for a free estimate on any CGI repair, reface, or full replacement.
Our crews have installed and repaired CGI cabinetry in Redhawk, Paloma del Sol, and Wolf Creek for over a decade. We’re not manufacturer-affiliated or an authorized CGI dealer. We’re a licensed Temecula General Contractor that knows these exact cabinet lines because we’ve worked on thousands of them in this city. That independence means we recommend what’s actually right for your kitchen, not what a manufacturer program tells us to push.
Why Temecula Residents Choose Us for CGI Service
CGI cabinetry was the builder-grade standard in Temecula for twenty years. Walk through any 1990s home in Paloma del Sol or Redhawk and you’ll find CGI maple shaker doors, raised panel oak fronts, or white thermofoil boxes. Most contractors know how to hang a cabinet. Fewer know which CGI hinge pattern matches a 1997 Wolf Creek install versus a 2003 one. That’s the difference.
Noel Carbajal, our owner, grew up patching stucco and reroofing porches with his uncle in Santa Ana, then studied Construction Technology at Santiago Canyon College. He’s spent the better part of three decades in residential construction, and he’s the reason we stock what other Temecula contractors don’t. When a homeowner calls about one peeling CGI thermofoil door, we don’t pitch a full reface. We check the box structure first, then match the door. Build it right the first time, the second time costs twice as much and nobody’s happy.
We use CGI OEM hinges, drawer slides, and touch-up products when they’re available. When they’re discontinued or backordered, we substitute Blum or Grass aftermarket hardware that preserves fit and finish. Either way, you get the straight answer on cost before we start.
Styles & brands we work with
Common CGI Construction Problems We Solve in Temecula
- Thermofoil delamination on upper cabinets. CGI white thermofoil doors peel and curl when exposed to sustained heat, and Temecula’s 95 – 105°F summer stretches make it worse. Homes without a proper range hood vented to the exterior trap that heat and moisture inside the cabinet, and the thermofoil fails first. We replace the affected doors and address the ventilation so it doesn’t happen again.
- Drawer box joint separation and sagging bottoms. CGI’s particleboard-core drawers hold up for 15 – 20 years, then the wide pot-and-pan drawers start to sag. The joints loosen, the bottom panel drops, and eventually the drawer front pulls away. We rebuild or replace the drawer box while keeping your existing CGI face intact.
- Hinge screw pull-out. CGI’s 32mm hinge plates anchor into side panels that weaken with moisture. A slow sink leak or slab condensation behind the cabinet is enough to soften the particleboard, and the screws strip. We repair the panel, re-drill the system holes, and install fresh hinges.
- Finish fading and yellowing on south- and west-facing walls. Temecula sun through single-pane windows bleaches CGI factory-painted and thermofoil doors over time. The finish thins, yellows, or clouds. We reface or refinish doors where the box is sound, and recommend UV-rated window film or glass upgrades where the sun exposure is severe.
- Cabinet box swelling from slab moisture. Older Temecula homes on concrete slabs, especially in the 92590 and 92591 pockets near Old Town, see seasonal moisture wick into cabinet bases. The particleboard swells, the face frame separates, and the doors no longer close square. When the box is structurally compromised, we recommend replacement over patching.
CGI Service in Temecula: What Local Conditions Mean for Your Equipment
Temecula’s housing stock is not like San Diego’s or even Murrieta’s, though we also offer CGI repair in Murrieta. Most of the city went up between 1985 and 2005 in master-planned tracts, and CGI cabinets were original equipment in a huge share of those kitchens. Because our cabinet shop works those homes daily, we keep a running inventory of discontinued CGI door profiles and hinge patterns used in Redhawk, Paloma del Sol, and Wolf Creek. When a single door fails on a 1998 Redhawk kitchen, we can match the profile, the finish, and the hinge bore without ordering a full door set or refacing the entire run. That salvage-level parts knowledge is rare outside a market where CGI was the builder-grade standard for two decades.
In one Redhawk home built in 1998, our crew was called to fix a CGI white thermofoil kitchen where the upper cabinet doors above the range had delaminated and were curling at the edges. The original recirculating range hood had been dumping heat and moisture into the cabinets for years. We sourced matching CGI door fronts from a local supplier that stocks discontinued profiles, replaced the failed doors, and added a proper range hood vented to the exterior. The homeowner kept the original CGI boxes and saved thousands over a full reface.
This matters because Temecula sits in a high-fire-severity zone on the wildland edge. Exterior remodels and additions often trigger Riverside County fire-resistant construction requirements: Class A roofing, ember-resistant vents, defensible space. Kitchen remodels don’t usually pull those triggers, but whole-home renovations that touch the building envelope do. We help Temecula homeowners plan for those requirements up front instead of discovering them at permit review.
CGI Models & Products We Service in Temecula
We service the CGI lines most common in Temecula kitchens: CGI Maple Shaker (typical of original 1990s installs), CGI Raised Panel Oak, CGI White Thermofoil, and CGI MDF Shaker. Our parts approach is straightforward: OEM first, quality aftermarket second. When a CGI hinge or drawer slide is discontinued, we use Blum or Grass equivalents that match the bore pattern and load rating. We maintain local stock of common CGI replacement components so most Temecula repairs don’t wait on a supply order.
For broader CGI sales & service details, see our brand overview page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Temecula
What you’ll pay depends on scope. A single door replacement runs toward the low end. A full kitchen with new CGI cabinet boxes, counters, and backsplash runs toward the top. Here are the ranges we quote in Temecula:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
These ranges cover typical Temecula tract-home kitchens. Your exact price depends on cabinet count, door profile, finish matching, whether we’re refacing or replacing, and what countertop material you choose. Every free estimate includes a written line-item quote so you see exactly where the money goes. Call (844) 681-3590 to schedule yours.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Temecula
Yes, in most cases. We keep a running inventory of discontinued CGI door profiles and hinge patterns from the Redhawk, Paloma del Sol, and Wolf Creek tract builds, so we can match a single damaged door or add a cabinet to an existing run without a full reface. Call (844) 681-3590 and we’ll confirm your profile before you spend a dime.
It depends on the cabinet box. If the boxes are square, dry, and structurally sound, replacing the affected doors is usually the cheaper and faster fix. If the boxes are swelling from years of moisture, you’re better off replacing. We’ll tell you which path applies to your kitchen before quoting either. For an exact number, call (844) 681-3590.
Interior kitchen work is generally outside HOA architectural review in Temecula. Where HOAs do get involved is anything that changes the exterior, like adding a window over the sink or cutting a new exterior vent for a range hood in a planned community such as Redhawk or Wolf Creek. We handle that coordination as part of the permit package.
For in-stock discontinued profiles, we can often start within a week. For new CGI cabinet orders or custom door matching that requires a manufacturer run, expect two to four weeks depending on the profile and finish. We’ll give you a written timeline with your estimate.
Usually, yes. We match the existing door profile and finish, build the island base from new or salvaged CGI boxes, and tie the countertop into the same run so it looks original. Call (844) 681-3590 for a free island quote.
Service Areas Near Temecula
We serve Temecula and the surrounding Inland Empire communities, including the full Temecula service area, Murrieta, Fallbrook, and Menifee. For homeowners further out, we also provide CGI service in Highland and CGI service in Rainbow. If you’re unsure whether we cover your address, call and ask.
Book Your CGI Service in Temecula Today
If you’re dealing with peeling thermofoil doors, sagging drawers, or a kitchen that needs a full CGI cabinet refresh, call (844) 681-3590. Free estimates, written line-item quotes, and no pressure. We’ll come to your Temecula home, assess the cabinets, and tell you exactly what’s worth fixing and what isn’t.
Written by Noel Carbajal, Owner at Framework Contractors, serving Temecula’s CGI cabinetry needs for over a decade.