Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Freedom, CA | Framework Contractors
CGI construction service in Freedom typically means cabinet installation, refacing, or a full kitchen or bath remodel, and we handle all three. Framework Contractors is an independent contractor that installs and services CGI cabinetry throughout the 95019 area. What makes our CGI work here different comes down to one thing: we build for Santa Cruz County rules and Pajaro Valley conditions, not for a generic California project. Call (844) 681-3590 and we’ll come look at your kitchen, bath, or outbuilding.
We’ve installed our General Contractor in Freedom with CGI Ready-to-Assemble kitchen cabinets, all-wood vanities, and Euro-style frameless boxes in ranch houses, farmworker housing, and older single-story homes across the area. Some crews see CGI as a quick cabinet job. We see it as a project where the cabinet has to survive inland heat, winter damp, and floors that haven’t been level since the Eisenhower administration. That changes how we install.
Why Freedom Residents Choose Us for CGI Service
Most general contractors in the Pajaro Valley know CGI cabinets by name. Fewer have actually worked through what happens to a particleboard box after three summers of Freedom heat and a wet winter. We have.
Noel Carbajal started patching stucco and reroofing porches before he could drive, and he’s spent nearly thirty years in the trades since. That experience matters when a CGI drawer glide fails because the floor under it slopes half an inch over six feet. We know CGI’s RTA lineup, its all-wood bath vanities, and its Euro-style frameless line well enough to tell you when a cabinet is worth repairing and when you’re better off replacing the whole run. We keep OEM-compatible parts on hand for common failures and we don’t push replacements when a hinge or glide will do the job.
Being local to Freedom means we don’t treat your project like a detour from our Watsonville CGI service or Santa Cruz. We schedule around county inspection routes, we know which older homes have slab floors versus raised foundations, and we plan for the moisture that comes with the Pajaro River floodplain. That’s the kind of local knowledge you can’t get from a cabinet supplier’s install-authorized list.
Styles & brands we work with
Common CGI Construction Problems We Solve in Freedom
- Swollen particleboard and separated joints in CGI RTA cabinets. Freedom’s winter rain and the humidity swings in an unventilated kitchen are rough on particleboard. We see boxes that swell at the seams and doors that won’t close square. We repair isolated sections and replace full runs when the core is too far gone.
- Thermofoil peeling on CGI doors and drawer fronts. Inland summer heat in the Pajaro Valley, especially in a kitchen that lacks good exhaust, breaks down the thermofoil bond on cabinet doors. Once it starts peeling near the stove or above a heat source, it spreads. We reface or replace those doors and advise on ventilation so it doesn’t come back.
- Drawer glide failure and hinge sag on out-of-level floors. Mid-century ranch homes in Freedom settle. Cabinets sit on floors that pitch, and the stock hardware CGI ships gets asked to do work it was never designed for. We shim, we relevel, and we upgrade glides so drawers stop binding and hinges stop sagging.
- Water damage and delamination at the toe kick of bathroom vanities. Older Freedom homes often have small bathrooms with poor exhaust. A CGI all-wood vanity that soaks up shower steam every morning will delaminate at the base within a few years. We rebuild toe kicks in moisture-resistant material and recommend exhaust upgrades alongside the cabinet work.
- Outbuilding and detached garage cabinet installs. A lot of Freedom property includes barns, sheds, and detached garages. Hanging CGI cabinets in an unconditioned outbuilding means planning for bigger temperature swings than a conditioned kitchen would see. We adjust hardware, anchoring, and material choices accordingly.
CGI Service in Freedom: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic CGI page: Freedom is unincorporated Santa Cruz County land. That single fact changes almost everything about a cabinet or countertop job. Permits don’t go through a city building department. They go through the county, and inspections run on the county’s rural route. A CGI service in Interlaken or Watsonville cabinet job might get an inspector in a day or two. In Freedom, you’re often waiting on the county’s schedule, which can add several days to a project timeline no matter how fast the cabinet install itself goes.
We build that county plan-check time into every project schedule we quote for Freedom. When we tell you a kitchen remodel will take three weeks, we’re not guessing. We’re accounting for the county’s inspection route, the smaller unincorporated road network, and the reality that a project on Green Valley Road doesn’t move at the same pace as one on Main Street in Watsonville. For CGI cabinet owners, that reality also affects repair decisions. If a cabinet box is failing and you’re on the county’s rural inspection route anyway for another permit, bundling that cabinet replacement into the same scope often saves you a second round of county visits and fees.
Freedom’s inland Pajaro Valley climate adds another layer. Summer days run warmer and drier than coastal spots like Capitola, and winter brings real rain plus occasional flooding concern along the river. Particleboard core in CGI RTA cabinets expands and contracts with those swings. We account for that by sealing exposed edges, maintaining proper clearances from heat sources, and choosing anchoring methods that tolerate slight seasonal movement in older wood-framed houses.
Our field crews have seen this play out. Working on a ranch house along the Pajaro River floodplain, we found a CGI RTA kitchen cabinet set that had swollen from a slow under-sink leak compounded by seasonal humidity. After reframing the toe kick, installing new CGI in Corralitos-grade all-wood boxes, and upgrading the drawer glides, that kitchen held up through two rainy seasons without a callback. The fix wasn’t just replacing boxes. It was understanding what the river floodplain air does to wood products and building for it.
CGI Models & Products We Service in Freedom
We work on the full CGI residential lineup: the Ready-to-Assemble kitchen cabinets you see in remodeled ranch kitchens, the All-Wood bath vanities popular in Pajaro Valley bathroom upgrades, and the Euro-Style frameless cabinets that show up in newer builds and gut remodels.
Our parts approach is straightforward. When a CGI replacement door, drawer box, or hinge is available as an OEM part, we order it. Exact fit, exact finish, no guesswork. When CGI has discontinued something and the part is gone, we source aftermarket equivalents that match or exceed the original spec. We don’t install cheap knockoff hardware and pretend it’s the same. For isolated damage like one swollen door or a failed glide, we repair. When multiple boxes or several fronts are failing at once, replacement with new CGI cabinetry usually costs less than patching piece by piece.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Freedom
What a CGI cabinet job costs in Freedom depends on whether you’re refacing, installing new boxes, or doing a full kitchen or bath remodel. Here are the ranges we typically quote for this area:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What moves a Freedom cabinet job toward the top or bottom of that range: how much of the existing cabinet structure can be salvaged, whether the floors need leveling before new boxes go in, whether county permitting adds plan-check time, and what finish and hardware you choose. Our free estimate includes a written line-item quote so you see exactly where the money goes. Call (844) 681-3590 to schedule one.
Serving Freedom, CA — Our Local Coverage Area
We’re based in the Freedom area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Freedom
Generally, no permit is required just to swap out cabinets in the same footprint. That changes if you’re moving plumbing, altering walls, or changing the electrical layout as part of the kitchen remodel. Since Freedom is unincorporated, any trigger like that goes through Santa Cruz County, not a city desk. Call (844) 681-3590 and we can tell you what your specific scope requires.
CGI’s all-wood lines handle the Pajaro Valley climate better than particleboard RTA boxes. The real variables are ventilation, proximity to heat sources, and moisture exposure in the kitchen or bath. An inland summer kitchen without good exhaust will eventually peel thermofoil doors. Winter damp will swell unprotected particleboard edges. Proper sealing, shimming, and ventilation make the difference.
Yes, when the finish is still in CGI’s current catalog. We order matching OEM doors and drawer fronts when available. If your finish has been discontinued, we match the closest available option and show you a sample before ordering. Call (844) 681-3590 to have us look at your existing cabinets.
Because Freedom is unincorporated. Santa Cruz County handles permits and inspections, and the county’s rural inspection route moves on a different schedule than Watsonville’s city inspectors. We build that extra plan-check and inspection time into our Freedom project timelines from day one, so you’re not surprised mid-job. An exact timeline for your project comes free with your estimate.
Cabinet installation alone in Freedom typically runs $4,000 to $13,000 depending on kitchen size, cabinet line, and whether any floor leveling or structural repair is needed. A full kitchen remodel with CGI cabinetry, countertops, and finishes ranges $14,000 to $45,000. For an exact quote on your specific kitchen, call (844) 681-3590 – estimates are free and take about an hour on site.
Service Areas Near Freedom
We run CGI cabinet and countertop crews throughout the Pajaro Valley and surrounding Santa Cruz County roads. You’ll find our Freedom service area work overlapping with projects in Watsonville, plus we cover CGI service in San Martin and CGI service in Amesti. If you’re in the 95019 ZIP or the unincorporated pockets nearby, CGI sales & service applies just as directly to your property.
Book Your CGI Service in Freedom Today
Whether it’s a single swollen cabinet door or a full kitchen gut in a Freedom ranch house, we’ll send a crew that knows CGI and knows this valley. Call (844) 681-3590 to schedule your free estimate. Build it right the first time – the second time costs twice as much and nobody’s happy.
Written by Noel Carbajal, Owner at Framework Contractors, serving Freedom since the company’s first Pajaro Valley project.