Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Cypress, CA | Framework Contractors
We provide independent CGI cabinet installation, refacing, and full kitchen remodeling across Cypress’s 90630 ZIP code. Our crews have installed and serviced CGI cabinetry in hundreds of Cypress homes, and the single biggest difference here is the housing stock itself: 1950s-1970s tract homes with original plumbing and walls that shift over time. That means a CGI cabinet job in Cypress demands more prep work than a newer build in Tustin or Irvine, and we plan for it from the first site visit. Call (844) 681-3590 to schedule yours.
Framework Contractors is not a CGI dealer and we have no manufacturer affiliation. What we are is a full-scope general contractor that has been working with CGI sales & service for years, which means we know every RTA line, every hinge spec, and every failure point these boxes develop in real kitchens. Whether you need a single cabinet run replaced or a complete kitchen gut, we measure, order, install, and finish the job under one contract.
Why Cypress Residents Choose Us for CGI Service
Noel Carbajal grew up down the road in Santa Ana’s Willard neighborhood, and he spent years learning framing and finish work before earning his construction technology credentials at Santiago Canyon College. He has been building and remodeling across Orange County for almost three decades, and his crews have seen Garden Grove CGI service cabinets in every condition you can imagine. That matters when you’re trying to decide whether to repair, reface, or replace a cabinet run in a 1968 Cypress kitchen with bowed sheetrock and galvanized plumbing hiding behind the toe kicks.
We favor CGI OEM hinges, glides, and touch-up kits for like-for-like work. But when a lower-end CGI drawer glide has failed prematurely, we will spec a better aftermarket soft-close unit instead of selling you the same part that just broke. That independent judgment is the whole point. Build it right the first time, the second time costs twice as much and nobody’s happy.
Our position as Cypress service area contractors means we’re already local. No waiting on a crew from Los Angeles. No upcharges for travel. We know the streets, the permit office quirks, and the way pre-1975 tract homes behave when you start pulling cabinets off the walls.
Styles & brands we work with
Common CGI Construction Problems We Solve in Cypress
These are the failures we see regularly in Cypress kitchens, with the local reason behind each one:
- Swollen particleboard cabinet bottoms. CGI Ready-to-Assemble lines use particleboard-core boxes, and those bottoms swell and crumble when water sits against them. In Cypress’s 1960s tract homes, original galvanized supply lines develop slow pinhole leaks right behind the toe kicks, and the damage goes unnoticed until the cabinet floor starts caving in. We re-route the plumbing before rebuilding the cabinet.
- Euro-style hinge pullout on settling walls. Frameless CGI hinges are screwed into thin side panels. When those cabinet runs are anchored to bowed walls on postwar slabs, the constant tension works the screws loose. We furr out and shim the wall first, then rehang the run so the hinges hold.
- Binding drawer glides on uneven floors. Older Cypress kitchens rarely have level floors. Lower-end CGI glides bind and fail when the cabinet sits even a quarter inch out of level. We shim the boxes properly, and if the glides are shot, we upgrade them to aftermarket soft-close hardware. No point replacing a bad part with the same bad part.
- Thermofoil peeling at cabinet corners. Some CGI Shaker door styles use thermofoil finishes, and those peel at the corners in kitchens with poor ventilation and warm inland-summer heat gain that Cypress gets from June through September. We reface or replace the doors rather than leave you with a peeling corner that catches every hand that passes.
- Hidden chases behind cabinet runs. In pre-1975 Cypress homes, many kitchen walls were originally exterior walls before a room addition enclosed them. Pulling a cabinet run and finding old stucco, sheathing, or an abandoned utility chase behind it is routine here. We survey that cavity before any new CGI box goes in, and we build out the wall so the cabinet anchors properly.
CGI Service in Cypress: What Local Conditions Mean for Your Equipment
Cypress is a master-planned postwar suburb, and most of its housing stock went up between the 1950s and 1970s, which puts this city in a very specific category compared to CGI in Stanton. Those kitchens were built with original galvanized plumbing, cast-iron drains, minimal insulation, and walls that were framed in a way no current code would allow. What that means for CGI cabinets specifically is this: you are not installing into a clean, modern cavity. You are installing into a wall that may have been an exterior wall sixty years ago, with old stucco and sheathing still behind the drywall, and a plumbing system that is quietly corroding from the inside out.
So our process here starts with potholing and as-built verification, not with a tape measure. We check what is actually inside the wall before we order a single cabinet box. Then we address moisture, level, and anchoring. Then we build out the wall to true, shim the base, and hang the cabinet. The cabinet is the last step, not the first. That sequencing is what prevents the failures we get called to fix in other people’s work.
CGI Models & Products We Service in Cypress
We work across the full CGI lineup commonly sold in Southern California. That includes the Ready-to-Assemble All-Wood Cabinets, the Euro-Style Frameless Cabinetry, the Lancaster Series, and the Shaker and Raised-Panel door styles. For RTA lines, we handle the assembly, wall anchoring, and leveling as part of the install, so the boxes are not sitting on a garage floor waiting for a homeowner to figure out which cam lock goes where.
Parts are straightforward. We keep CGI OEM hinges, adjustable glides, and touch-up kits on hand for matching existing work, but we do not hesitate to spec upgraded aftermarket soft-close hardware when the original has a known failure rate. We only recommend full replacement when water damage or structural compromise makes repair uneconomical. Otherwise it is reface or rebox, and you keep the cabinets you already paid for.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Cypress
The ranges below reflect what we see across Cypress for CGI work tied into existing kitchens. Your exact number depends on how much wall work, plumbing, and leveling the job requires.
| Service | Typical Range in Cypress |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Every estimate includes a written line-item breakdown, and we will walk the existing kitchen with you to point out what needs addressing before the cabinets arrive, whether that’s a wet wall, a bowed stud, or a drain that has seen better days. Call (844) 681-3590 for an exact quote. Estimates are free.
Serving Cypress, CA — Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Cypress
Yes, in most cases we can order matching doors or boxes for the CGI Shaker and raised-panel lines, but color matching across production batches is the hard part. For exact consistency, we often reface the entire run so the new and old doors match perfectly. Call (844) 681-3590 and we will tell you what we can do with your specific line and finish.
If the drains show any sign of scaling or dampness, yes, we recommend replacing them before the cabinets go in. Cast-iron drains fail from the inside out, and the last thing you want is a slow leak behind a new CGI cabinet run that nobody sees until the particleboard gives way. We include this inspection in the estimate.
Kitchen cabinets are not structural, so a basic replacement typically does not require a permit. But if the job involves moving plumbing, electrical, or a sink wall, the city’s review process kicks in, and the Los Alamitos corridor adds some scrutiny because of the emergency-response route. We pull the permits and handle the inspections whenever they’re required. Call (844) 681-3590 with your address and we will tell you what applies.
RTA lines can arrive in two to four weeks, while some door styles and finishes run longer depending on the supplier’s stock. We measure and design everything in-house, so the lead time is the only variable. Once the order is placed, we schedule the install around the delivery date.
Yes. Garage conversions and ADU builds in Cypress often have walls with no sheathing or plumbing rough-in, so we frame and fur out the wall before anchoring any cabinet. It is more prep work, but the cabinets go in level and stay that way. Call (844) 681-3590 to have us look at the space.
Service Areas Near Cypress
Framework Contractors serves Cypress and the surrounding Orange County corridor, including Santa Ana, Garden Grove, Fountain Valley, and Buena Park. If you’re in one of those cities, you can reach us at the same number. For clients just north of here, we also offer CGI service in Buena Park and CGI service in Brea with the same crew and the same process.
Book Your CGI Service in Cypress Today
If your CGI in La Palma kitchen needs new CGI cabinets, a reface, or a full remodel, call (844) 681-3590. We will schedule a site visit, measure the space, and give you a written estimate. Same-week visits are available for most Cypress addresses.
Written by Noel Carbajal, Owner at Framework Contractors, serving Cypress since he first started running Orange County job sites nearly three decades ago.