Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in San Francisco, CA | Framework Contractors
Belgard paver and wall work in San Francisco means building on steep, damp, zero-setback lots where access is the whole game. We’re Framework Contractors, an independent Belgard service provider across San Francisco, and what sets our work apart here is that we plan for the walk-down-and-hand-carry reality of these rear yards before we ever order a single paver. Call (844) 681-3590 to talk through your project and get a free estimate.
Why San Francisco Residents Choose Us for Belgard Service
We’ve set Belgard Lafitt Rustic Slab pavers, Catalina Grana slab pavers, and Weston Stone retaining wall blocks on hillside lots in Noe Valley, Bernal Heights, and the Mission long enough to know how these units behave when the ground never really dries out and the neighbor’s foundation is two feet away. Noel Carbajal, our owner, came up doing stucco and reroofing work with his uncle before studying Construction Technology at Santiago Canyon College, and he’s brought that same read-the-drawing, respect-the-site discipline to every Belgard install we run in San Francisco. We read Belgard’s published installation specs and handle DBI and Planning review, but we build to what the slope, the soil, and the code actually demand. That’s the only way a hillside wall stays plumb here.
We work independent of Belgard. No manufacturer affiliation, no “authorized” badge. What that means for you is honesty about what a product will and won’t do on a wet San Francisco slope, and a crew that’s not reading the Belgard catalog for the first time.
Styles & brands we work with







Common Belgard Construction Problems We Solve in San Francisco
- Efflorescence and salt staining on fog-belt pavers. West-facing Belgard patios in the Sunset and Richmond districts sit in marine air most of the year. Joint sand never fully cures, and salt-driven white staining creeps across the surface. We clean and reseal with products matched to Belgard’s concrete mix, then fix the drainage that’s keeping the joints wet.
- Base saturation and rutting on driveway pavers. San Francisco’s high winter water table and hillside drainage push water up through paver bases that were compacted for a dry site. You’ll see depressions and shifted units within two winters. We excavate, re-grade, and rebuild the base with downslope weep points.
- Wall block creep and tilt on steep terraces. Belgard Weston Stone walls on Noe Valley and Bernal Heights slopes want to lean if the geogrid and drainage detail were skimped on. We rebuild with laid-back placement, proper grid depth, and a drained base so the wall works with the hill, not against it.
- Spalling and edge chipping on zero-setback lots. When a paver edge runs right against the neighbor’s foundation, over-compaction and tight-edge tamping stress the units. We adjust the bedding layer and cut edge details so pavers seat without crushing.
- Faded or mismatched replacement patches. Matching an existing Belgard color on a partial patio replacement in San Francisco means accounting for years of fog, salt, and UV. We order matched production runs and stage the replacement so the transition isn’t obvious from the house.
Belgard Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the thing that never shows up on a Belgard product page: on the sloped, densely built blocks of Noe Valley, Bernal Heights, and the Mission, most rear yards are not accessible by truck or machine. The lot is inches from the neighbor, the only rear access is a stair, and material for a Belgard patio or retaining wall has to be hand-carried or crane-set down a side yard or over the roof. On a Bernal Heights hillside lot off Powhattan, a client wanted a Lafitt Rustic Slab patio and a low Weston Stone retaining wall behind a 1920s wood-frame, similar to Visitacion Valley Belgard service we provide. The soils report and DBI discretionary review had already eaten three months. Our crew staged pavers and wall block down the side stairs by hand because the neighbor’s foundation was two feet from the property line, then built the wall on a drained, geogrid-reinforced base with weep points tied to the downslope. That patio has held through two wet winters without heaving or wall tilt. That’s what we mean when we say local conditions shape everything: the material order, the staging plan, the schedule. If you’re calling around, ask any contractor how they’re getting pallets into your rear yard. Their answer will tell you a lot.
Belgard Models & Products We Service in San Francisco
We install and repair the full Belgard hardscape line that actually gets used in San Francisco: Lafitt Rustic Slab pavers, Catalina Grana slab pavers, Weston Stone retaining wall blocks, and the Dimensions and Holland Stone collections, including the Anchorage and Newcastle slab lines. When a wall or patio edge needs repair, we use Belgard’s own matched units, caps, and geogrid so the detail holds to the manufacturer’s published spec. We don’t swap in off-brand pavers to save a few dollars on a hillside job, because a mismatched unit on a wet slope reads like a scar. For San Francisco turnaround, we keep the most common Lafitt Rustic Slab and Weston Stone colors in our local yard rotation, so a repair isn’t waiting on a two-week manufacturer shipment.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in San Francisco
What a Belgard project costs in San Francisco depends on access, base condition, and slope. A flat patio with street access is a different job from a rear yard that needs hand-carrying and a retaining wall rebuild. Here are the ranges we quote from:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $4,130 – $12,980 |
| Paver Driveway Installation | $8,260 – $21,240 |
| Driveway Replacement | $5,900 – $16,520 |
Your free estimate includes a site visit, a walk of the access path, and a written line-item quote. No lump-sum mystery numbers. Call (844) 681-3590 to schedule yours.
Serving San Francisco, CA — Our Local Coverage Area
We’re a San Francisco General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in San Francisco
Yes. We stage material by hand down side stairs or crane-set over the roof when the lot allows. The schedule and cost reflect that labor, and we’ll walk the access path with you before quoting. Call (844) 681-3590 for a site visit and exact figure.
Almost always. Walls over three feet typically require a DBI permit and a structural review, and on a steep San Francisco hillside, we’ll bring a soils engineer in early. We handle the plans, the permit, and the inspection. Call (844) 681-3590 to talk through your slope.
That’s efflorescence and salt staining from marine air keeping the joints wet, and it’s common on west-facing San Francisco patios. We clean, reseal, and fix the drainage that’s holding moisture, rather than just masking the surface. Call (844) 681-3590 for an assessment.
San Francisco’s hillside drainage rules generally require you to hold your own water, so the answer depends on your lot’s existing drainage pattern and what DBI will accept. We’ll review the site and tell you straight what’s possible. Call (844) 681-3590 for a free estimate.
We order matched production runs and account for years of fog, salt, and sun on the existing units. The goal is a transition you can’t spot from the house. Call (844) 681-3590 and we’ll walk the patio with you.
Service Areas Near San Francisco
We serve all of San Francisco including 94111, 94112, 94114, and 94115. For Belgard work in nearby neighborhoods, see our Belgard service in Chinatown page and our Belgard service in Tiburon page. We also cover projects across our full San Francisco service area and handle all Belgard sales & service inquiries.
Book Your Belgard Service in San Francisco Today
Call (844) 681-3590 to schedule your free Belgard estimate in San Francisco. We’ll walk your access path, review drainage and slope, and give you a written line-item quote. Build it right the first time – the second time costs twice as much and nobody’s happy.
Written by Noel Carbajal, Owner at Framework Contractors, serving San Francisco and the surrounding area since 1998.