Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Daly City, CA | Framework Contractors
We service Ameristar doors, cabinets, and roofing across Daly City, from the fog-heavy west-side hills to the flats near 94014. The work here is different than what we see most places: Daly City’s marine layer keeps exterior surfaces damp for months at a time, so Ameristar steel doors rust at the bottoms, cabinet boxes swell against unsealed stucco walls, and shingle roofs shed granules early where flashing was skipped. We quote the repair or replacement on what the product actually needs, not a manufacturer script. Call (844) 681-3590 for a free estimate.
Why Daly City Residents Choose Us for Ameristar Service
We’ve pulled, rebuilt, and re-roofed enough Ameristar product in this city to know exactly where it fails and why. The fog belt off the Pacific accelerates problems that stay hidden for years on drier lots. Noel Carbajal, our owner, grew up patching stucco and reroofing porches with his uncle in Santa Ana, then spent three decades building and remodeling across Orange County before expanding our service territory north. That background means we open up a wall and recognize what we’re looking at, whether it’s original 1950s framing or a door someone set into thin stucco without a sill pan twenty years ago. We’re an independent contractor, not an Ameristar dealer or warranty shop, so our recommendation isn’t filtered through a manufacturer’s interest. We tell you what the product needs and what it’ll cost before we touch it.
We carry and source OEM Ameristar hinges, sills, thresholds, and flashing where the model line still supports them, and use quality aftermarket components when OEM is discontinued. That distinction matters on rusted door bottoms and fog-swollen cabinet boxes where a cheap substitute would fail again inside two winters. Your materials, our craftsmanship, and an honest read on which one to replace. For full Ameristar sales & service coverage, we handle everything from single-cabinet replacements to full exterior renovations.
Styles & brands we work with







Common Ameristar Construction Problems We Solve in Daly City
- Rusted Ameristar steel garage and entry door bottoms. Wind-driven moisture off the Pacific sits against poorly flashed door openings on west-side hillside streets, and steel door skins delaminate at the base before rust starts climbing. We cut out the rot, repair or replace the bottom rail, and re-flash the opening so water sheds away from the door instead of pooling against it.
- Swollen Ameristar cabinet boxes along exterior and garage-adjacent kitchen walls. The 1940s and 1950s stucco-over-wood-frame construction in Daly City leaves little room for vapor barriers, and unsealed cabinet back panels wick moisture straight into particleboard. Hinges pop, drawer slides bind, and the box itself starts to crumble along the bottom edge. We rebuild or replace affected boxes and seal the wall-side surface so it can’t absorb more of the house’s ambient moisture.
- Lifted and granule-shedding Ameristar shingles on low-slope split-level roofs. The fog settles over Daly City garages and stays there. Where original builders skipped drip-edge or ice-and-water detailing, shingles lift at the eaves and start losing granules years before the rest of the roof shows wear. We repair the damaged sections and correct the flashing detail that caused it.
- Rotted sheathing behind Ameristar door frames set directly into stucco. This is the expensive one, and it’s common in Daly City’s older tract homes. A door installed without a sill pan lets water track behind the frame, soaking the wood the door hangs on. By the time the threshold feels spongy, the framing behind it is already gone.
- Sticking Ameristar patio doors that won’t track level anymore. Graded hillside lots settle over decades, and door frames shift with them. A door that scraped open last summer won’t close at all by November. We re-square the frame and replace worn rollers and tracks so the panel moves the way it did when it was new.
Ameristar Service in Daly City: What Local Conditions Mean for Your Equipment
Here’s the thing about Daly City that most contractors from outside the area don’t plan for: this city sits square in a fog belt that barely gives stucco and paint a drying window. The marine layer rolls in most afternoons and hangs around until mid-morning, which means exterior sealing, flashing, and paint work on west-side hillside lots cure far slower than they would ten minutes south in the sun. We schedule Ameristar exterior work around that constraint, putting sealing and flashing on the drier, wind-cleared days instead of assuming a normal cure and walking away. That drying constraint is far sharper in Daly City than on the sunnier Peninsula cities just south, and it drives how we sequence every exterior job. On a hillside street in the Westlake area off 94015, our crew opened up a fog-rotted Ameristar steel entry door set into thin stucco and found the original install had no sill pan, so the sheathing behind the frame had gone soft. We replaced the framing, flashed and pan-sealed the opening, and reset a properly fitted door with new threshold and weatherstripping so the marine moisture sheds instead of soaking the wall. Build it right the first time, because the second time costs twice as much and nobody’s happy.
Ameristar Models & Products We Service in Daly City
We work on the full Ameristar residential range: steel raised-panel garage doors, steel and fiberglass entry and patio doors, stock RTA and assembled kitchen and bath cabinets, plus roofing shingles and accessory flashing components. For discontinued Ameristar lines, we source quality aftermarket hinges, sills, thresholds, and flashing that match the original dimensions and finish rather than hiding a cheap substitute behind paint. Cabinet work in Daly City runs heavy on refacing and box replacement, since the fog moisture problem attacks particleboard long before a door front ever goes bad. Roof repair jobs lean toward flashing corrections and eave detail work. Window replacement on these 1950s stucco homes is rarely a straight swap, which we’ll explain below.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Daly City
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
Every estimate is free and written line by line. We don’t change the number once work starts unless we uncover framing damage and you approve the change in writing first. Call (844) 681-3590 to schedule a walkthrough in Daly City.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and also offer Colma Ameristar service, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Daly City
If the swelling is limited to one box and the surrounding cabinets are sound, we can replace just that unit, and we’ll seal the wall-side surface before installing the new one. If moisture has spread across shared side panels, the affected boxes come out together and we rebuild the run to match. Call (844) 681-3590 and we’ll tell you what’s actually needed after we see it.
If the rust is confined to the bottom rail and the door skin is still bonded, we can cut out the corrosion and install a new bottom rail with proper drainage flashing, which typically gets you years more service. If the skin has delaminated or the track mounting points are rusted through, replacement is the honest call. Call (844) 681-3590 and we’ll assess it, including Ameristar in Brisbane, for free.
Yes, and it’s measurable. Constant moisture at the eave line, especially on low-slope split-level roofs, causes granules to shed early where the original builder skipped drip-edge or ice-and-water membrane. A roof that would last 25 years on a dry lot can show eave deterioration in 15 here.
Rarely. The original frames in these tract homes are often set directly into stucco without integrated flashing, and by now the surrounding sheathing has usually absorbed decades of fog moisture. We typically have to remove the window, repair or replace the framing around it, flash the opening properly, then set the new unit. Straight swaps happen, but we plan for the full correction.
No. Framework Contractors is an independent provider of Ameristar repair in Broadmoor and surrounding areas, not authorized, sponsored, or warranty-backed by the manufacturer. We work with Ameristar products every day, source OEM parts where they exist, and tell you plainly when a repair doesn’t make sense, but we don’t speak for Ameristar and we don’t process their warranty claims. Call (844) 681-3590 for an independent read on your Ameristar equipment.
Service Areas Near Daly City
Our Ameristar service covers all four Daly City ZIP codes, 94014, 94015, 94016, and 94017, plus the surrounding cities. For broader coverage, see our Daly City service area page. We also run Ameristar crews into Ameristar service in Mission District for urban door and cabinet work in older housing stock, and into Ameristar service in Noe Valley where hillside lots and fog exposure create the same moisture problems we see on Daly City’s west side.
Book Your Ameristar Service in Daly City Today
Call (844) 681-3590 and tell us what’s failing. We’ll schedule a walkthrough in Daly City, give you a written line-item estimate, and tell you whether that Ameristar door, cabinet, or roof needs a repair or a replacement. Estimates are free, and we answer the phone.
Written by Noel Carbajal, Owner at Framework Contractors, serving Daly City since expanding our service area from Orange County.