Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Mission District, CA | Framework Contractors
We provide independent KraftMaid cabinet installation, refacing, and our Home Remodeling in Mission District across Mission District’s 94110. Our KraftMaid work here is different because we sequence every cabinet job around the soft-story seismic retrofit cycle that governs so many of these pre-1940s Victorians and Edwardians. That’s not a sales pitch – it’s the reality of building on these blocks. Call (844) 681-3590 for a free estimate.
We’ve set KraftMaid cabinetry in dozens of bowed-front Mission District Victorians and Edwardians, and we know how their box construction, door styles, and finish systems behave in damp, out-of-plumb rooms the factory tolerances never accounted for. We’re an independent KraftMaid service provider – not authorized, sponsored, or endorsed by KraftMaid – and we say so on every bid. Framework Contractors handles the full scope: cabinet installation, refacing, countertops, backsplash, and complete kitchen remodels under one contract and one point of contact. See our broader KraftMaid sales & service experience for what we do across the Bay Area.
Why Mission District Residents Choose Us for KraftMaid Service
Most Mission District kitchens we walk into were built before KraftMaid existed as a brand, let alone before the company introduced the Vantage and Marquee lines homeowners ask us about today. That matters. The walls are rarely plumb. The floors have settled. The original plumbing is often still in the wall. And the cabinet layout was designed for a 1920s household, not a modern one.
Noel Carbajal, our owner at Framework Contractors, grew up helping his uncle patch stucco and reroof porches in Santa Ana before he was old enough to drive. He went through the Construction Technology program at Santiago Canyon College and has spent nearly three decades building and remodeling across California. His rule on cabinet work in old housing stock: build it right the first time, the second time costs twice as much and nobody’s happy. That’s why our Mission District KraftMaid installs always start with leveling and shimming against the actual wall, not the wall the blueprint assumes.
We stock commonly needed KraftMaid hardware for faster turnaround in Mission District: soft-close hinges, drawer slides, levelers, and touch-up kits for popular Marquee and Vantage finishes. If you’re planning a larger remodel, we also handle the structural, plumbing, and electrical work that cabinet replacement often uncovers, working as your Mission District General Contractor. One contractor covering the whole job beats coordinating three trades through DBI permit queues.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Mission District
- Thermofoil delamination on Vantage-level doors. The painted-MDF and thermofoil door faces on entry-level KraftMaid lines blister and peel along the bottom rails when Mission District fog and kitchen damp sit on them year after year. We see this constantly on 2020-era flips and rental ADU kitchens where Vantage was the budget spec.
- Sagging particleboard shelving under heavy loads. Older KraftMaid base cabinets with particleboard boxes sag under cast-iron and stoneware. It’s worse in Mission District kitchens where a prior owner wedged a breakfast nook into a bowed bay window and shimmed the boxes out of level to make it fit.
- Rot and swelling at farmhouse sink bases. Apron-front and farmhouse sink bases rot at the stiles because slow leaks in pre-1940s plumbing go unnoticed behind the cabinet back panel. By the time the door won’t close, the box is usually compromised.
- Binding doors and misaligned drawer fronts. Cabinet runs installed against out-of-plumb balloon-frame walls – near-universal in the 1880s-1930s Mission District stock – bind at the doors and pull drawer fronts out of alignment as the building moves seasonally. The fog season makes it worse: wood swells in winter damp, shrinks in the dry summer-autumn stretch.
- Garage-level kitchen cabinetry above soft-story cripple walls. Kitchen cabinets in a ground-floor unit sit directly over the cripple walls the Mandatory Soft Story Retrofit Ordinance targets. If the building hasn’t been retrofitted, the whole cabinet run can rack out of square as the garage level flexes. We sequence KraftMaid work around that seismic permit rather than fighting it.
KraftMaid Service in Mission District: What Local Conditions Mean for Your Equipment
Here’s the thing about doing KraftMaid work in Mission District that you won’t read on a generic cabinet page. These blocks share near-identical soft-story garage-at-grade plans. Your kitchen might sit directly above the garage, which means your cabinets sit directly over the cripple walls the city’s retrofit ordinance forces homeowners to strengthen. If your building hasn’t been retrofitted yet, and you’re planning a kitchen remodel, the DBI permit queue and the structural engineering review are part of your cabinet timeline whether you like it or not.
What that means for KraftMaid owners specifically: if we install a new cabinet run before the soft-story work happens, the seismic retrofit will shake, rack, or shift the framing enough to throw every door out of alignment within months. So we coordinate. We check the retrofit status on your property, sequence the KraftMaid install after the structural work and DBI inspection where possible, or at minimum build in the shimming and leveling tolerance the building will need. Neighbors on the same block are often doing near-identical seismic jobs – sharing the same permit queues and the same inspectors – so this is the bread and butter of Mission District cabinet work, not an edge case. That’s the difference between a cabinet installer who happens to work in the Mission and one who understands the Mission.
KraftMaid Models & Products We Service in Mission District
We install and service the full KraftMaid range you’ll find in Mission District homes reimodeled over the past three decades:
- KraftMaid Vantage – the entry-level all-plywood line common in flips and rental ADU kitchens throughout the Mission.
- KraftMaid Synthesis – the full-access frameless line, popular in modern and compact Mission kitchens where every inch counts.
- KraftMaid Marquee – all-plywood boxes with dovetail drawers; the premium line we recommend for long-term Mission District homes.
- KraftMaid Brindle and Heirloom raised-panel oak and maple – the 1990s-2000s remodel wave doors still on thousands of Mission kitchens.
On parts, we source OEM KraftMaid doors, drawer fronts, and hinges when finish match matters. Heirloom and Marquee colors are hard to replicate with aftermarket. But we use quality aftermarket soft-close slides and levelers where they outperform the original hardware. And if the boxes are particleboard and water-damaged, we’ll tell you straight: refacing is throwing money at rot, and targeted cabinet replacement is the better spend.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Mission District
KraftMaid cabinet work in Mission District varies by scope, cabinet line, and whether structural or seismic sequencing is involved. These are our market-calibrated ranges for the area:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
What drives the price in Mission District specifically: out-of-plumb walls that need more shimming and leveling time, older plumbing that often needs replacement once the cabinets come out, and any sequencing around soft-story retrofit permits. A free estimate tells you the exact number for your kitchen. Call (844) 681-3590 and we’ll walk the job with you.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well, and we also serve Chinatown KraftMaid service areas. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Mission District
Yes, in most cases. We source OEM KraftMaid doors and drawer fronts for Heirloom and Brindle oak and maple lines, which covers the bulk of 1990s-2000s Mission District remodels. If the exact finish is discontinued, we’ll show you the closest match options and let you decide before any order goes in. Call (844) 681-3590 and we’ll identify what you have.
Sometimes. If it’s thermofoil delamination on Vantage-level doors, the door faces are done and need replacement – refacing peeling thermofoil doesn’t hold. If it’s a finish issue on a solid wood Heirloom or Marquee door, we can often sand, re-stain, and refinish it. The honest answer depends on the door line and how much moisture it’s absorbed, which in Mission District fog is usually more than homeowners think.
Yes. If your Mission District building is subject to the Mandatory Soft Story Retrofit Ordinance and hasn’t been retrofitted yet, we check the permit status and DBI inspection timeline before we touch the kitchen. Installing KraftMaid cabinetry before the structural work is done means re-leveling everything six months later. We sequence it right the first time so you don’t pay twice.
They will if the installer knows how to shim and scribe against out-of-plumb balloon-frame walls, which we do on nearly every Mission District job. The factory boxes are square; your walls are not. We build the install to the real wall geometry, not the blueprint, so doors close clean and drawers don’t bind. Call (844) 681-3590 for a free in-person assessment.
It depends on the boxes. If the boxes are plywood and structurally sound, refacing with OEM KraftMaid doors is often the right spend. If the boxes are particleboard and have absorbed Mission District moisture or a slow leak behind the back panel, refacing is cosmetic work over rot and you’ll be doing it again in a few years. We’ll show you what’s inside the boxes before you spend a dollar either way.
Service Areas Near Mission District
We serve Mission District and the surrounding San Francisco neighborhoods, including Noe Valley, Bernal Heights, Potrero Hill, and the Castro. See our Mission District service area page for local details, or check out KraftMaid service in Noe Valley and KraftMaid service in San Francisco for neighboring coverage.
Book Your KraftMaid Service in Mission District Today
We’ll walk your kitchen, check your soft-story retrofit status, and give you a written line-item estimate before any work starts. Call (844) 681-3590 to schedule your free KraftMaid estimate in Mission District or for KraftMaid in Visitacion Valley.
Written by Noel Carbajal, Owner at Framework Contractors, serving Mission District since 1998.