Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Fountain Valley, CA | Framework Contractors
We provide independent Dvele construction service across Fountain Valley, from A-Series kitchen expansions to full ADU builds on mid-century lots. The thing that sets our work apart: we know where Dvele’s factory tolerances meet a 1960s Fountain Valley slab, because we’ve been building and servicing Dvele homes here since their panelized cassettes first showed up in Orange County. Call (844) 681-3590 for a free estimate on any Dvele project in Fountain Valley.
Why Fountain Valley Residents Choose Us for Dvele Service
Noel Carbajal grew up in Santa Ana’s Willard neighborhood, patching stucco and reroofing porches with his uncle before he could drive. After Construction Technology at Santiago Canyon College, he spent close to three decades remodeling across Orange County, including Huntington Beach Dvele service, and his crew has worked on Dvele homes since the brand entered this market. We read Dvele shop drawings and connection details daily, which means we don’t show up to your Fountain Valley project guessing at how the panelized system goes together.
We’re independent. Not authorized, not endorsed by Dvele. That matters because we can repair a seam or re-flash a roof tie-in without waiting on a factory rep, and we source Dvele’s specified connection hardware where it exists and high-quality equivalents for discontinued trim. For Fountain Valley homeowners on 92708 and 92728 lots, that translates to a contractor who actually understands the assembly your home was built with. See our broader Dvele sales & service page for the full scope of what we handle.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Fountain Valley
Dvele builds a tight panelized system at the factory. Fountain Valley’s aging slabs, Santa Ana winds, and coastal moisture — like what we see with Dvele service in Costa Mesa — test that system in ways the shop drawings don’t always anticipate. Here’s what we see most:
- Panel joint gaps and dust intrusion at cassette seams: A 1962 tract home near Mile Square had settled unevenly over six decades. When the new Dvele wall cassette met that slab, the seam opened roughly 3/8 inch and every Santa Ana pulled dust through it. We re-set the joint with Dvele’s specified gasket, added a site-built capillary break, and the first winter rain test stayed dry.
- Roof-to-wall flashing failures at low-slope transitions: Fountain Valley’s ranch homes were never designed for Dvele’s panelized roofline. Where the factory membrane meets site-built gutters on an original tract fascia, rain finds the gap first. We see this constantly on additions where new panels tie into 1960s framing.
- Wall cavity condensation on north-facing panels: Dvele’s vapor profile assumes a drier assembly than Fountain Valley’s coastal-influenced Mediterranean climate delivers. Bathrooms and kitchens added into panel walls are the first places paint blisters and cavities hold moisture.
- Foundation interface cracks and anchor corrosion: Original slab-on-grade construction with no capillary break means Dvele modules sit directly on concrete that wicks moisture through long dry-to-wet swings. We replace corroded anchors and re-bed the interface rather than pretending a sealant fixes it.
- Santa Ana wind-driven debris damage to standing-seam roofs: Dry conditions and high gusts loosen factory-applied membrane edges and tear at trim flashings. We inspect after major wind events because small failures here turn into interior damage by winter rain.
Dvele Service in Fountain Valley: What Local Conditions Mean for Your Equipment
Fountain Valley is essentially fully built out. The housing stock runs from the late 1950s through the mid-1970s, mostly single-story ranch tracts on slab-on-grade, and those lots were platted with narrow side setbacks because nobody in 1962 planned for a second unit or a kitchen that doubled in size. That single fact shapes every Dvele project here more than any spec in the catalog. Before a panel gets ordered, the lot-line survey and setback check usually decide whether the project pencils out. We’ve seen wonderful Dvele ADU plans die at survey stage because a five-foot side setback meant the module couldn’t physically fit, and we’ve seen modest additions get rescued when the survey revealed an extra 18 inches nobody expected. This isn’t a consideration in newer subdivisions with generous setbacks, but in Fountain Valley’s 92708 tract near Mile Square Park, it’s the whole game. A contractor who doesn’t start with the survey is designing on hope, and that’s expensive hope on a $90,000 to $220,000 ADU.
Dvele Models & Products We Service in Fountain Valley
We work on the full Dvele lineup: A-Series single-story modular homes, D-Series two-story modulars, Custom Series architect-designed panelized builds, and Accessory Dwelling Unit packages, including Dvele repair in Westminster. Our Fountain Valley service trucks carry Dvele’s factory connection hardware and specified sealants, plus high-quality equivalents for trim and flashing components the factory no longer produces. We never substitute knockoff structural connectors. When a seam or flashing fails, we repair the specific joint rather than re-panel. Full panel replacement is reserved for crushed or water-saturated cassettes, which are rare but do happen after roof leaks run unchecked through a Fountain Valley winter.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Fountain Valley
Costs depend on scope, but here’s what we quote across Fountain Valley, with the range reflecting job complexity and material choices:
| Service | Price Range |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
A free estimate includes a site walk, lot-line and setback review where relevant, and a written line-item quote with no change orders unless you change the scope. Call (844) 681-3590 to schedule yours.
Serving Fountain Valley, CA — Our Local Coverage Area
We’re based in the Fountain Valley area and know this community well, and we also provide Dvele service in Midway City. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Fountain Valley
Sometimes, but only after a structural review of the existing slab and a lot-line survey confirm the addition fits within setbacks and the slab can carry the load. We’ve built Dvele A-Series kitchen expansions directly on original Fountain Valley slabs when the concrete is sound and the interface gets a proper capillary break. When the slab has settled or cracked beyond tolerance, you’ll need at minimum a new perimeter footing. Call (844) 681-3590 and we’ll tell you which situation you’re in after one site visit.
Fountain Valley’s 1958 – 1975 slabs settle unevenly over decades, and when a Dvele cassette sits on that movement, the factory-set seam tolerances open up. Santa Ana winds then drive dust through the gap, and winter rain follows the same path. The fix is re-setting the joint with Dvele’s specified gasket and adding a site-built capillary break at the slab interface, not just caulking the surface.
Dvele’s low-slope and standing-seam transitions can tie into existing tile or metal roofs, but the flashing detail is where most failures happen. The factory-applied membrane meets a site-built gutter or original fascia, and that hand-off needs to be built correctly or the first rain exposes it. We flash those transitions to the existing roofline, not over it.
Garage conversions are one of the more practical ADU routes in Fountain Valley because the footprint already exists and the structure’s there. Setback compliance still applies, but on most 1960s tracts the garage sits within the building envelope. Budget $90,000 to $220,000 depending on whether you go Dvele ADU package or site-built, and expect the survey to be step one. Call (844) 681-3590 for a specific quote on your garage.
We inspect panel seams, roof-to-wall flashing, standing-seam edges, and anchor points for wind-driven damage, then repair the specific joint or component rather than replacing panels wholesale. After heavy Santa Ana events we find loosened trim flashings and membrane edges that would leak by winter. Call (844) 681-3590 and we’ll schedule a post-event inspection before the next rain.
Service Areas Near Fountain Valley
We serve Fountain Valley and the surrounding Orange County corridor, including Santa Ana, Garden Grove, Tustin, Orange, and North Tustin. If you’re in a neighboring city, see our Dvele service in Villa Park or Dvele service in Irvine pages. And for a broader look at where we work, visit our Fountain Valley service area page.
Book Your Dvele Service in Fountain Valley Today
Whether it’s a failed seam on a Dvele A-Series or a full ADU on a narrow mid-century lot, we’ll send a crew that’s built this system before. Call (844) 681-3590 to schedule your free estimate in Fountain Valley. Build it right the first time – the second time costs twice as much and nobody’s happy.
Written by Noel Carbajal, Owner at Framework Contractors, serving Fountain Valley since 2020.