Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Redwood Shores, CA | Framework Contractors
As a Redwood Shores General Contractor, we install, repair, and relay Unilock paver systems across this area, and the single biggest thing that separates good paver work here from a callback six months later is the base. Almost every lot in this city sits on drained marsh or engineered fill from the 1960s, so the ground moves, holds water, and pushes back in ways it doesn’t in Belmont or Foster City. Framework Contractors is an independent hardscape contractor, not a Unilock dealer or authorized rep. When we quote a patio or driveway in Redwood Shores, we design the base for the soil first and the pavers second. Call (844) 681-3590 for a free estimate.
Why Redwood Shores Residents Choose Us for Unilock Service
Noel Carbajal, our owner, learned the trade the slow way: reading structural drawings in a community college construction program, then spending nearly three decades on job sites where the ground didn’t cooperate. That background matters in Redwood Shores, where a paver job lives or dies by what happens underneath it. We’ve installed Unilock Brussels Block, Beacon Hill, Town Hall, and Pisa2 across this community long enough to know how each product behaves on bayfront fill, similar to our experience with Unilock in San Mateo. We carry OEM edge restraints and the right polymeric sand for salt-air exposure, and we stock enough of the common Unilock profiles to turn around most Redwood Shores repairs without waiting on a distributor. When we see a heaved patio or a hazed paver surface, we usually know what the ground did before we pull the first stone.
Our approach with Unilock products is direct: we match OEM components where the system needs them and use better aftermarket geotextile and drainage materials where they outperform. No substitution on edge restraints, ever. The restraint is what keeps a paver field honest on moving fill. Unilock sales & service pages sometimes describe the product line in general terms. We talk about what it does on Redwood Shores soil.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Redwood Shores
- Efflorescence blooming on Brussels Block and Town Hall pavers. The fog-driven moisture and high water table along the bay edge push salts up through the bedding sand, and those salts haze the paver surface. We see this most on lagoon-side and bay-facing properties in Redwood Shores, where the air stays damp and the ground never really dries out. The fix is drainage and the right joint sand, not just a surface wash.
- Edge spalling and joint sand loss on Beacon Hill. Where a paver field was set on engineered fill that settles unevenly, a once-flat patio starts holding water at the corners and heaving at the edges. The pavers chip at the restraint line, and the joint sand works loose. We lift the field, re-grade the base, and relay with a properly compacted section sized for settlement.
- Polymeric sand washing out on driveways and walkways. Persistent bayfront wind and salt air scour joint sand fast, especially where the original edge restraint was under-built. Driveways in Redwood Shores take this harder than patios because the wind funnels down the street corridors off the Bay. We re-set restraints and re-sand with a polymer rated for the exposure.
- Color fading and surface pitting on Pisa2 and similar concrete pavers. Salt-laden air plus standing water in low spots attacks the finish on concrete pavers faster here than inland Redwood Shores-adjacent areas. Where drainage is poor, the paver surface shows it within a few seasons.
- Heaving and ponding across the paver field. When a patio or driveway sits on original marsh landfill with a shallow base and no separation fabric, the high water table pumps fines up into the joint sand and the whole field shifts. This is the most common failure we walk into in Redwood Shores, and it’s almost never the paver’s fault. The base was wrong for the ground.
Unilock Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Here’s the part most paver pages won’t tell you: Redwood Shores was built on drained marsh starting in the 1960s. The entire neighborhood rose out of bayfront wetland, and virtually every residential lot here sits on engineered fill over former marshland. That means two things for Unilock work. First, the water table is high, often shallow enough that below-grade excavation hits saturated soil. Second, the fill settles over time, unevenly and unpredictably. On lagoon-side lots off Redwood Shores Parkway, we regularly probe before quoting and find settlement-prone fill that was never engineered for a rigid paver system. A patio built like they build them in the hills towns nearby will heave within a few years, hold water, and spall at the edges. We design Unilock paver bases for this ground specifically: deeper aggregate sections, geotextile separation fabric, and drainage directed toward the lagoon-side swales this community was engineered around. The pavers are the easy part. The base is what keeps them flat in Redwood Shores.
On one lagoon-side lot off Redwood Shores Parkway, we pulled up a heaved Brussels Block patio where the original installer had set pavers on fill with no geotextile and a shallow base. The high water table had pumped fines up into the joint sand. We lifted the field, excavated deeper, laid separation fabric and a compacted aggregate base sized for the settlement-prone fill, re-set the OEM edge restraint, and relayed the same pavers with fresh polymeric sand. That patio now drains to the lagoon-side swale instead of ponding.
Unilock Models & Products We Service in Redwood Shores
We work with the full range of Unilock paver and wall products, but the four we see most in Redwood Shores are Brussels Block, Beacon Hill, Town Hall, and Pisa2. Each behaves a little differently on this ground. Brussels Block and Town Hall are workhorses for patios and walkways, but their surface porosity makes them prone to efflorescence near the bay. Beacon Hill’s modular format looks sharp on driveways, but it’s only as stable as the base underneath it. Pisa2 is a good driveway paver with strong interlock, though the salt air and standing water in low spots will attack the finish. We keep common Unilock profiles and OEM edge restraints in stock for fast Redwood Shores turnaround, and we pull compatible aftermarket geotextile and drainage components when the project calls for them. Our parts approach is simple: use OEM where the system depends on it, upgrade where the ground demands better.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Redwood Shores
What we quote in Redwood Shores depends on the condition of the ground under the pavers. A straight paver patio installation runs different numbers than a driveway replacement or a repair that requires deeper excavation and geotextile. Here are the ranges we work within:
| Unilock Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Every our Home Remodeling in Redwood Shores estimate starts with a site visit. We need to see the lot, check whether it sits on original marsh fill, and look at drainage before we put a number on paper. A free estimate means exactly that: we walk the property, talk through what the ground needs, and give you a written line-item quote. Call (844) 681-3590 to schedule.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Redwood Shores
Yes. On Redwood Shores’ engineered fill and former marshland, a Unilock patio base typically needs more depth than standard to handle settlement and a high water table. We excavate deeper, lay geotextile separation fabric, and build a thicker compacted aggregate base. Call (844) 681-3590 and we’ll probe your lot before quoting so you know what you’re dealing with.
That white haze is efflorescence from salts wicking up through the bedding sand, driven by the fog moisture and high water table along Redwood Shores’ bay edge. Washing it off helps temporarily, but the real fix is improved drainage and the right joint sand. Call (844) 681-3590 for an assessment.
Salt air accelerates surface wear and joint sand breakdown, especially on concrete pavers like Pisa2. A properly installed Unilock driveway with sealed joints and good drainage holds up, but edge restraints and drainage details matter more in Redwood Shores than inland, as we’ve also seen with Unilock in San Carlos. We can inspect what you have and tell you what it needs.
We check historical fill maps and probe the soil before we quote any paver work in Redwood Shores. If your property sits on original marsh landfill, the base design changes: deeper excavation, geotextile fabric, and a drainage plan built for a high water table. Every free estimate includes this check. Call (844) 681-3590.
Yes, if the pavers are sound. We lift the field, re-grade and compact the base, fix the edge restraints, and relay the same Unilock pavers with fresh joint sand. Full replacement only makes sense when the base itself is gone or the pavers are spalled through. Call (844) 681-3590 and we’ll tell you which situation you have.
Service Areas Near Redwood Shores
We serve Redwood Shores and the surrounding peninsula. Redwood Shores service area covers the 94065 zip code, and we also run Unilock jobs in Unilock service in Belmont and Unilock service in Foster City, plus parts of nearby San Mateo County.
Book Your Unilock Service in Redwood Shores Today
If your Unilock patio is heaving, hazing, or losing joint sand, we’ll tell you what’s actually going on underneath it. Free estimates in Redwood Shores. Call (844) 681-3590 to schedule a site visit.
Written by Noel Carbajal, Owner at Framework Contractors, serving Redwood Shores since 2005.