Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA | Framework Contractors
We’re Framework Contractors, an independent general contractor that installs and repairs Jerith aluminum and vinyl fencing and railing throughout Mountain View’s 94035, 94039, 94040, and 94041 ZIP codes. We buy Jerith product direct and work with it every week, but we don’t represent Jerith and we’re not authorized or warranty-backed by them. What separates our Jerith work in Mountain View is this: we re-stake lot lines and deepen footings for expansive clay before we ever hang a gate, because the soil here doesn’t sit still. Call (844) 681-3590 for a free estimate.
Why Mountain View Residents Choose Us for Jerith Service
Jerith makes a specific kind of fence: clean aluminum picket lines like the Winchester and Savannah styles, the Patriot and ProSeries residential lines, vinyl privacy panels, and matching gate and railing systems. We’ve installed and repaired those extrusions, brackets, and post caps across the Peninsula and South Bay — including Jerith in Sunnyvale — long enough to know how they actually fail in service, not just how they look in a catalog. That matters in Mountain View, where mid-century ranch and Eichler-influenced homes on slab foundations sit over expansive clay that shifts every wet season. A fence installed on undersized footings here will lean within two winters.
Noel Carbajal, our owner, grew up patching stucco and reroofing porches with his uncle in Santa Ana’s Willard neighborhood, then trained in Construction Technology at Santiago Canyon College. Three decades of building and remodeling taught him something that applies directly to Mountain View fence work: the footing is the job. The panel just hangs on it. We bring that same thinking to every Jerith run we install, re-hang, or re-foot in this city, whether as a General Contractor – Mountain View or for standalone fence work.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Mountain View
- Powder-coat chalking and edge chipping – Jerith’s aluminum coating fails first at cut ends, post caps, and gate corners where moisture sits. Mountain View’s dry summers don’t cause it, but the winter wet season does. We see chalking concentrated on north-facing runs and anywhere sprinkler overspray hits the lower rail in 94040’s older yard stock.
- Galvanic corrosion at hinge hardware – Stainless hinges and latch hardware threaded into aluminum posts show up as white bloom and seized fasteners. It’s a slow failure most owners never notice until a gate won’t latch. On Mountain View’s downtown side streets, where fences are tight to the house, the corrosion gets worse faster because runoff pools at post bases.
- Vinyl panel bowing and post lean – Vinyl panels bow when the concrete footing under the post is too small for the panel area it’s carrying. Mountain View’s expansive clay makes this worse: soil heaves in winter, settles in summer, and a shallow footing doesn’t get to argue. We see leaning vinyl posts most often on east-side lots with older fencing.
- Gate sag and hinge pull-out – Aluminum gates hung on posts set too shallow for their span will always pull the hinge side in, no matter how good the hardware. In Mountain View, the post is usually set in whatever footing the old wood fence had, which wasn’t built to carry a metal gate at all. We re-foot the post, then hang an OEM Jerith gate on stainless hardware.
- Fence runs out of square after property-line shifts – When a neighbor adds a second story or an ADU, the lot line often never gets re-staked. The old fence sits where it sat, not where the line actually is. We pull the as-built and reset the run to the recorded line. It’s a Mountain View problem more than a Jerith problem, but it’s our most common call here.
Jerith Service in Mountain View: What Local Conditions Mean for Your Fence
Mountain View’s mid-century tracts around downtown and the east side sit on slab-on-grade and shallow foundations over expansive clay that moves seasonally. The soil swells in the wet months and shrinks in the dry ones, and every cycle torques whatever is set in it. For a Jerith fence, that means the post footings can’t be treated as incidental. They often have to be deepened below the active clay layer and set independent of a fence line that has already shifted with the soil. A flat, stable-lot fence job in a neighboring city doesn’t force that. Here, if you don’t account for clay movement, a new Jerith run will look square for the first summer and list by the second winter. Outside the mid-century core, in the 94040 and 94041 neighborhoods where lots slope slightly, drainage concentrates at the low corner of a fence line. That’s where we see the most powder-coat chalking and the fastest hardware corrosion. The answer isn’t always new panels. Sometimes it’s better drainage at the post base and a re-coat at the cut ends.
We’ve watched this play out on a low-slung ranch home off a downtown Mountain View side street in 94041. The owner wanted a Jerith aluminum picket run and a matching gate to replace a leaning wood fence along a property line shared with a newer two-story addition next door. While setting posts we found the old footings had heaved with the clay and the shared line had never been re-staked after the neighbor’s addition. We pulled the as-built, reset the line, deepened the Jerith post footings, and hung an OEM Jerith gate on stainless hardware. The run is now square to the actual lot line and the gate swings clean. That’s the job most Mountain View homes actually need: not just a new panel, but a re-established line and a footing that can hold it. The same principle guides our Home Remodeling – Mountain View work.
Jerith Models & Products We Service in Mountain View
We work with Jerith’s aluminum ornamental lines – Winchester, Savannah, and similar picket styles – plus the Patriot and ProSeries aluminum residential fence lines, vinyl privacy panels in contemporary and picket profiles, and aluminum railing and gate systems matched to fence runs. Where Jerith OEM extrusions, brackets, and caps exist, we use them so profiles and finishes match exactly. Where OEM hardware is the weak link, like the stainless hinge and latch sets on salt- and moisture-exposed posts, we specify name-brand stainless replacements that outlast the originals. We stock common Jerith post caps, brackets, and latch sets locally for faster Mountain View turnaround, and we order less common extrusions as needed. We’d rather re-hang and re-foot a sound Jerith run than sell a full replacement, and we tell you plainly when the coating or the anchoring has gone past repair.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
| Service | Typical Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
What drives the cost in Mountain View, more than the fence itself, is the ground under it. Deeper footings, re-staked lot lines, and clay-stable post bases add labor that a flat-lot fence job elsewhere doesn’t. Our free estimate covers the whole picture: we walk the run, check the existing footing depths, look at drainage at the post bases, and give you a written line-item quote. No change orders invented after the fact. Call (844) 681-3590 to schedule yours. It’s the only way to get a real number for your fence line in this city.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Most residential fence and gate installations in Mountain View do require a city permit, especially when the fence is in a front or corner side yard where height limits apply, or when the run is along a shared property line with an addition or ADU involved. We handle the permit paperwork and inspections as part of the project, and we pull the as-built to confirm the lot line before posts go in. Call (844) 681-3590 and we’ll check your specific address.
Yes. We re-stake the property line first, then set the Jerith posts and gate to the recorded line, not the old fence line. On the 1950s ranch lots common in Mountain View, the old line has often drifted with decades of soil movement and previous neighbor work. Matching the fence to the old line would just preserve the mistake. We square it to the actual boundary, and the run and gate read level even when the ground doesn’t.
Usually yes, if the chalking is at cut ends, post caps, and gate corners and the underside of the rails is still sound. We clean and prep the affected areas, treat any surface corrosion, and re-coat with a matched finish. If the chalking runs the full length of the rail or the aluminum itself is pitted, replacement panels are often the better call. We’ll tell you which one makes sense for your fence. Call (844) 681-3590 for an honest assessment.
It will, if the footings are sized for the panel area and deepened past the active clay layer. The addition or ADU doesn’t hurt the fence by itself; what hurts it is the drainage change. New rooflines and downspouts concentrate water at the fence line, and in Mountain View’s clay soil that water makes post bases move. We set the vinyl posts on deeper footings and often add drainage at the low end of the run so the fence isn’t sitting in pooled runoff every winter.
We do. Fencing and railing are part of the full-scope work Framework Contractors handles, from the roof down to the foundation. When you’re already adding a second story or an ADU on a Mountain View lot, the fence line, the gate, and the drainage all change together. We handle it under one contract and one point of contact, so the fence doesn’t end up as an afterthought. Call (844) 681-3590 for a free estimate on the whole scope.
Service Areas Near Mountain View
We cover Mountain View and the surrounding Peninsula and South Bay area. If you’re checking exact pricing or want a site visit, call (844) 681-3590. We work across the neighboring communities too, including Jerith service in Los Altos, Jerith service in Los Altos Hills, and the broader Mountain View service area. For the full range of what we do on Jerith product, see Jerith sales & service.
Book Your Jerith Service in Mountain View Today
Need a Jerith fence installed, re-hung, or re-footed in Mountain View? We’ll walk the line, check the footings, and give you a written quote you can act on. Call (844) 681-3590 to schedule a free estimate. Build it right the first time – the second time costs twice as much and nobody’s happy.
Written by Noel Carbajal, owner at Framework Contractors, serving Mountain View with independent Jerith fence and railing service.