Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Temecula, CA | Framework Contractors
We install, repair, and replace Mr-Glass shower enclosures and mirror doors across Temecula, including the tract-home neighborhoods of Redhawk, Paloma del Sol, and Wolf Creek, and we also handle Murrieta Hot Springs Mr-Glass service. What sets our work apart here is simple: we’ve spent years re-templating Mr-Glass units in the city’s 1985-2005 stucco homes, so we know how these glass assemblies age under inland heat and Santa Ana wind loads. We’re an independent contractor, not authorized or sponsored by Mr-Glass, which means we quote the honest fix rather than a factory-mandated swap. Call (844) 681-3590 for a free estimate.
Why Temecula Residents Choose Us for Mr-Glass Service
Most general contractors in Temecula can hang a shower door. Far fewer can tell you why a Mr-Glass frameless pivot enclosure from a 1998 Paloma del Sol build has shifted out of plumb, or whether the rollers on a semi-frameless bypass door are worth rebuilding versus replacing. We can. Our familiarity with Mr-Glass’s product lines, from frameless pivot enclosures to sliding tub and shower doors, comes from handling hundreds of these units in tract homes across this city. Noel Carbajal, who leads our crew, started in the trades patching stucco and reroofing porches as a teenager, and he’s spent the decades since learning exactly how glass, framing, and finish work interact. That matters when your enclosure is one tile row away from a fire-rated exterior wall. We’re county-savvy, HOA-aware, and we use OEM Mr-Glass hardware wherever the series is still supported. See our Mr-Glass sales & service page for the full scope of what we handle.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Temecula
- Seized rollers and pivots on builder-era sliding doors. In homes built between 1985 and 2005, the original Mr-Glass hardware has now survived two to three decades of 95-105°F summer cycles. The grease in those rollers breaks down, the nylon wheels flat-spot, and the door starts dragging or jumping the track. We rebuild the roller assembly with OEM parts when the series is still supported, or match the profile with a quality aftermarket equivalent when it isn’t.
- Cracked seals and sweeps causing water migration. Temecula’s dry heat is brutal on rubber and vinyl. The factory sweep under a Mr-Glass bypass door eventually shrinks and hardens, letting water seep under the curb and stain the stucco-side wall. We see this most often in older 92590 and 92591 homes, where the combination of age and inland climate has done its worst.
- Frameless panel anchors loosening from slab movement. The expansive soils common to inland Riverside County foothill tracts don’t sit still. As slabs and wall framing settle, the anchors holding a frameless Mr-Glass panel can loosen, throwing the door out of plumb. We don’t just shim it and walk away. We check the rough opening, re-square where needed, and add proper blocking so the panel stays put.
- Hard water spotting and mineral etching on glass. Homes in 92590 and 92591, particularly those fed by older plumbing, accumulate mineral deposits faster than newer areas of Temecula. This gets worse when a property sits vacant part of the year, as some snowbird-style owners leave panels unused for months. We can assess whether the glass is salvageable with a professional cleaning or whether replacement makes better sense.
- Doors out of square after water damage or remodel work. When a bathroom remodel in a Temecula tract home uncovers water damage behind the shower wall, the studs may need repair before any glass goes back up. We coordinate that entire scope, so the Mr-Glass enclosure sits plumb and watertight against a sound structure.
Mr-Glass Service in Temecula: What Local Conditions Mean for Your Equipment
Here’s something most contractors won’t tell you about working in Temecula: this city sits in a high-fire-severity zone on the wildland edge. That may sound irrelevant to a shower door, but it isn’t. When a bathroom remodel or addition touches an exterior wall, Riverside County can pull in fire-resistant construction requirements before the permit is issued. That means Class A assemblies, ember-resistant vents, and defensible space planning. Our Mr-Glass enclosure work sometimes has to coordinate with those fire-rated wall and venting details, which a flat inland subdivision or Mr-Glass repair in Wildomar never triggers. On a Redhawk tract home built in the late 1990s, our crew pulled a failing Mr-Glass semi-frameless bypass door out of a hall bath. The original rollers had seized, the curb sweep had dried out, and water had stained the stucco-side wall. We found the opening out of square from slab movement, so we re-squared the rough opening, installed proper blocking for a door-rated frameless panel, and set a new Mr-Glass pivot enclosure with coastal-grade hinges and a fresh curb seal. The homeowner got a clean, plumb walk-in shower without disturbing the fire-rated exterior wall behind it. That’s the kind of coordination this market demands, and it’s the kind we’re built for.
Mr-Glass Models & Products We Service in Temecula
We work on the full range of Mr-Glass product lines found in Temecula homes: frameless pivot shower enclosures, sliding glass tub and shower doors, semi-frameless bypass shower doors, and mirror closet and wardrobe doors. Our parts approach is straightforward. Where the Mr-Glass series is still supported, we use OEM rollers, pivots, hinges, and seals. Where it isn’t, we match the profile and finish with quality aftermarket equivalents that hold up under inland heat. If a frame is sound, we reseal and re-hang. We only recommend full replacement when the glass is chipped, the tempered stamp is missing, or the wall behind the enclosure can’t support a plumb door-rated panel. That’s the honest call, every time.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Temecula
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives cost in Temecula comes down to three things: the condition of the rough opening, whether the home sits in a fire-overlay zone that triggers additional detailing, and which Mr-Glass series your existing hardware belongs to. A free estimate from us includes a full assessment of the frame, the slab, and the wall behind the glass. We’ll give you a written, line-item quote so you know exactly what’s involved. Call (844) 681-3590 to schedule yours.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well, with Mr-Glass repair in Murrieta and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Temecula
A straight glass enclosure swap typically doesn’t require a building permit in Temecula, but if the work touches plumbing, electrical, or an exterior wall, Riverside County may require one before we start. We’ll tell you upfront what your specific job triggers. Call (844) 681-3590 for a straight answer on your project.
In most cases, a dragging door on a 1990s Mr-Glass unit comes down to seized rollers or a failed sweep, and both are repairable if the frame is still sound. We’ll only recommend replacement if the glass is damaged or the opening can’t hold a plumb panel. Call (844) 681-3590 and we’ll assess it.
Frameless shower enclosures are interior work, so HOA architectural review rarely applies. Exceptions arise when the remodel involves an exterior window in the bathroom or anything visible from the street, which some Temecula HOAs do regulate. We know the review process here and can flag it early.
The homes in those Temecula ZIP codes are older, which means three decades of inland heat cycles have already degraded the original hardware. Add older plumbing that leaves harder water spots, and you get faster mineral etching and seal failure. The age of the home is the single biggest factor.
Yes, and we do it regularly. When the remodel touches an exterior wall, we coordinate the shower enclosure work with any fire-resistant construction requirements the county mandates, working alongside a General Contractor in Temecula when needed, so the glass goes in without compromising the wall assembly. Call (844) 681-3590 to talk through your specific remodel.
Service Areas Near Temecula
We serve Temecula and the surrounding communities, including Murrieta, Wildomar, Lake Elsinore, Menifee, and Fallbrook. See our Temecula service area page for full details. For Mr-Glass work in nearby cities, visit Mr-Glass service in Highland or Mr-Glass service in Rainbow.
Book Your Mr-Glass Service in Temecula Today
If your Mr-Glass enclosure is dragging, leaking, or out of plumb, don’t let it sit. The longer a seal fails, the more water migrates where it shouldn’t. Call (844) 681-3590 to schedule a free estimate, and we’ll get your glass right.
Written by Noel Carbajal, Owner at Framework Contractors, serving Temecula since day one.