Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood City, CA | Framework Contractors
We install and service Mr-Glass shower enclosures, frameless glass, and window systems throughout Redwood City, from the downtown precise-plan zone to the flat-roof tract neighborhoods on the west side. Framework Contractors is an independent Mr-Glass service provider, not a manufacturer-affiliated or authorized dealer, which means our advice starts with what your wall substrate and rough opening actually need. Most Mr-Glass failures we fix in Redwood City trace back to one of two things: hard-water etching on glass panels or out-of-square openings from settled 1950s and 60s framing. Call (844) 681-3590 and we’ll tell you over the phone whether it’s a re-seal, a re-hang, or a full replacement.
Why Redwood City Residents Choose Us for Mr-Glass Service
We’ve spent years working on Mr-Glass frameless pivot doors, semi-frameless sliders, and custom-templated heavy glass panels across every housing era Redwood City throws at us, from 1890s downtown bungalows on raised foundations to 1960s ranchers in the flats. Our owner, Noel Carbajal, grew up learning construction the slow way, patching stucco and reroofing porches with his uncle before he was old enough to drive, then sharpening those instincts in a Construction Technology program at Santiago Canyon College. That background matters when a Mr-Glass enclosure is anchored into framing that has settled an eighth of an inch over forty years. We work with the brands you already trust, and we treat every opening as its own job, not a stock-unit drop-in. Your materials, our craftsmanship.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood City
- Seal failure and mineral etching on frameless panels. Redwood City’s water supply runs hard, and glass on downtown and west-side homes takes a steady beating. We see the classic cloudy, etched band along the bottom of Mr-Glass panels where hard water sits against the seal. A new sweep and seal can buy years; full panel replacement is sometimes the smarter spend. We’ll be straight with you either way.
- Pivot and hinge wear causing door sag and edge-chip strikes. Older bungalows settle. When the wall behind a Mr-Glass pivot door has moved half an inch since the 1920s, the hinge takes the load, the door drops, and the bottom edge chips against the curb. We fix the framing anchor point, not just the hinge.
- Out-of-square rough openings in 1950s-60s tract baths. Flat-roof ranchers in neighborhoods like Friendly Acres and Centennial often have original tile set over unplumb framing. Sliding panels jump track. Pivot doors bind. A stock Mr-Glass unit won’t fix a wall that was never square. We laser-check, re-square, and template around what’s actually there.
- Thermal cycling stress on frames and caulk joints. Redwood City regularly hits the high 90s and 100s in summer while sitting at sea level. That expansion and contraction tests every caulk joint and frame corner on a glass enclosure. Gaps open, water migrates, and what started as a small drip becomes a wall repair. We address the movement, not just the symptom.
- Water damage behind failing enclosures from Redwood City’s first big winter rain. A slow leak that’s been ignored all summer shows itself the first week of real rain. By then, the drywall behind the enclosure is already compromised. We open it up, assess what’s salvageable, and build back correctly.
Mr-Glass Service in Redwood City: What Local Conditions Mean for Your Equipment
Here’s something you won’t find on a generic Mr-Glass page: Redwood City runs its own building department and enforces a downtown precise plan with design review along El Camino Real, Broadway, and the Sequoia Station area. If your Mr-Glass shower or window work is tied to a downtown remodel, you may be looking at material and frontage sign-off requirements that a west-side ranch-tract job a few miles away never touches. On a recent Friendly Acres rancher off Bay Road, our crew pulled a failing semi-frameless enclosure in a bath that had settled badly since the original tar-and-gravel-era build. The pivot door was dragging and chipping along the bottom edge. Because the opening was out of plumb, we couldn’t drop in a stock Mr-Glass unit. We laser-checked the wall, added solid blocking, re-squared the rough opening, and templated a custom frameless pivot with adjustable hinges so the door swings true. The homeowner got a walk-in shower that actually closes, not another kit that binds by summer. That’s the difference between knowing Mr-Glass products and knowing how they behave in this specific housing stock.
Mr-Glass Models & Products We Service in Redwood City
We service the full Mr-Glass line that shows up in Redwood City homes: frameless pivot shower doors in standard 3/8-inch glass, semi-frameless sliding shower enclosures, custom-templated heavy glass walk-in panels, and framed and mirror closet or bypass door systems. When a part fails, we use genuine Mr-Glass parts where they’re still available and match the original series. For discontinued OEM runs, we install quality aftermarket hinges, seals, and sweeps that meet or exceed the original spec. If the enclosure is sound, a re-seal and re-hang often outlasts the surrounding wall. If the frame is fatigued and the glass is etched, replacement is the smarter spend and we’ll say so. Same-day response isn’t something we promise lightly on glass work because templating and proper curing take time, but we’ll give you a straight timeline when you call.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood City
What you pay depends on whether we’re repairing, replacing, or converting. Here’s where the numbers land in Redwood City:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Out-of-square openings, solid blocking, water-damaged wall repair, and custom templating all affect the final number. That’s why we give written estimates after seeing the actual site, not a photo. We’re insured and bonded, state-licensed, and our estimates are free. Call (844) 681-3590 for an exact quote on your Mr-Glass project.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Woodside Mr-Glass service area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood City
Yes, if your property falls within the downtown precise-plan boundary covering El Camino Real, Broadway, and the Sequoia Station area. Interior work like a shower enclosure is usually exempt from frontage design review, but if the project is part of a larger remodel that touches exterior materials or storefront glass, the precise plan can require tailored materials and sign-off. We check before we quote, not after. Call (844) 681-3590 and we’ll tell you whether your address triggers review.
On most Redwood City homes, it’s the wall that moved, not the hinge that failed. Older bungalows and mid-century tract houses settle, and when the framing behind the enclosure shifts, the pivot takes the load. Replacing the hinge without addressing the wall anchor means the same sag returns in a year or two. We fix the root cause.
Yes, and we do it regularly in neighborhoods like Friendly Acres and West Menlo Park. Custom templating lets us work with what’s actually there instead of forcing a stock unit into a wall that was never square. We laser-check, add blocking, re-square the opening where needed, and template the glass to fit.
It is. Redwood City’s water supply carries enough mineral content to etch and cloud unprotected glass over time, especially along the bottom seal line where water sits. A good seal and consistent drying help, but many older enclosures we see are already etched past the point of polishing. We can tell you in a few minutes whether your panel is cleanable or needs replacement. Call (844) 681-3590 and we’ll give you a straight answer.
We do. Plumbing and drainage changes for a tub-to-shower conversion in Redwood City require a permit through the city’s building department, and we pull it, schedule the inspection, and stay on site until it passes. Your tub-to-shower conversion in Redwood City typically runs $3,500 to $10,000 depending on scope. Call (844) 681-3590 for a free estimate that includes the full permit picture.
Service Areas Near Redwood City
We serve Redwood City and the surrounding Bay Area corridor, including the communities that share the same split housing stock and hard-water conditions. If you’re in Mr-Glass sales & service territory to the south, or a homeowner in Redwood City service area neighborhoods like Centennial or Friendly Acres, our crews are already working nearby. We also cover Mr-Glass service in Emerald Lake Hills and Mr-Glass service in San Carlos, where the same mid-century tract baths and settling issues appear.
Book Your Mr-Glass Service in Redwood City Today
If your Mr-Glass enclosure is leaking, sagging, binding, or just looking rough, call us at (844) 681-3590. We’ll schedule a free on-site estimate, assess what’s actually going on with your walls and glass, and give you a number you can plan around. One contractor. Every system.
Written by Noel Carbajal, Owner at Framework Contractors, serving Redwood City and the broader Bay Area since the early 2000s.