Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Ben Lomond, CA | Framework Contractors
We provide independent Mr-Glass service across Ben Lomond – frameless shower enclosures, glass railings, mirrors, and walk-in shower builds. What makes our work here different: we template every Mr-Glass panel to what CZU rebuilds and older redwood cabins actually give us, meaning out-of-plumb walls, slope-cut bathrooms, and pier-and-beam settling. Call (844) 681-3590 for a free estimate.
We work on the full Mr-Glass line – the Frameless Shower Enclosure series, Semi-Frameless Sliding Shower Doors, Glass Railing & Balustrade systems, and Custom Mirrors & Medicine Cabinet glass. We’re an independent contractor, not manufacturer-affiliated or authorized, and we quote that plainly. Nobody in Ben Lomond should pay for a warranty claim that isn’t real.
Why Ben Lomond Residents Choose Us for Mr-Glass Service
Most glass contractors in the Santa Cruz Mountains never learned to read a wall that’s been settling for forty years. We have. Our crew has templated Mr-Glass enclosures in cabins along Highway 9 where the bathroom floor runs a half-inch out of level and the studs bow behind the tile, and we’ve done the same Lompico Mr-Glass service calls in similar mountain conditions. You can’t fix that with a bigger bead of silicone – you shim the brackets, reset the jambs, and cut the glass to the actual opening. That’s the work we do.
Noel Carbajal grew up helping his uncle patch stucco and reroof porches before he was old enough to drive, then studied Construction Technology at Santiago Canyon College in Orange. He learned to read structural drawings and speak framing, concrete, and finish work. Three decades later, our crew still treats every Ben Lomond job like a build that has to hold through winter storms and summer fire season. We stock genuine Mr-Glass hinges, handles, and sweeps where the original profile is available, and use matching-tolerance aftermarket seals when a line’s been discontinued. If the glass is intact, we reseal and rehang. We only recommend full replacement when a panel is chipped at a hinge or the enclosure can’t be brought back to plumb.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Ben Lomond
- Header and wall-jamb brackets pulling loose. Ben Lomond’s pier-and-beam bathrooms shift seasonally as clay soil swells with winter rain and dries through summer. When the framing racks, Mr-Glass brackets that were tight at install start walking off the wall. We reset the jambs, shim to plumb, and re-anchor with hardware rated for the load – not drywall anchors.
- Bottom sweep seals cracking and letting water track onto framing. Dry summer heat up here bakes vinyl water guards until they split. On a hillside cabin, that leaked water runs straight into the subfloor. We replace sweeps with OEM where available, or matching-tolerance aftermarket seals that actually seat against the tile.
- Hinge-side glass chip-out at the strike point. On older redwood-era homes, the door swing was often set to a wall that’s no longer plumb. The glass catches, chips at the hinge, and suddenly you’ve got a cracked panel that can’t be re-hung safely. We realign the door and replace the panel only if the chip compromises the hinge – never a full enclosure if one lite will do.
- Hazed or etched glass and corroded channel hardware. Well and spring water in Ben Lomond carries heavy minerals. Over time, they etch the glass and pit the channel. We can sometimes polish light haze out; when the channel’s corroded, we source replacement hardware and re-bed the track so water drains properly.
- Enclosures templated to the wrong walls. This one’s specific to CZU rebuilds. A burned cabin gets replaced under current fire code, and the new bathroom framing rarely matches the old layout. We’ve seen Mr-Glass installs where the glass was cut to the original plans and doesn’t fit the rebuilt room. We template to the walls that exist today – not the ones that burned.
Mr-Glass Service in Ben Lomond: What Local Conditions Mean for Your Equipment
Because so much of Ben Lomond’s current work is CZU Lightning Complex rebuilds permitted under today’s stricter fire code, new bathrooms here often get sized and framed differently than the burned cabin’s original layout. That means a Mr-Glass enclosure has to be templated to the new walls, not the old ones. On a CZU rebuild off Bear Creek Road, our crew templated a frameless Mr-Glass enclosure for a walk-in shower whose new framing sat a half-inch out of plumb from the old slab—work we’ve repeated with Mr-Glass in Brookdale on similar rebuilds. We shimmed and reset the wall-jamb brackets, swapped in fresh bottom sweeps, and hung 10mm tempered panels with a curbless entry so the door cleared cleanly – the homeowner got the ignition-resistant rebuild finished without a custom-glass upcharge. That’s the difference between a glass installer and a contractor who understands what this mountain’s fire code does to a floor plan.
Ben Lomond sits inside Cal Fire’s Very High Fire Hazard Severity Zone. Chapter 7A materials, ember-resistant vents, and defensible-space clearing are baseline here – not upgrades. For Mr-Glass work, that affects how we approach bathroom construction during a rebuild: the substrate behind the glass, the wall assembly, and the moisture management all have to satisfy fire marshal inspection while still holding a frameless enclosure true. You can’t just hang glass on a newly framed wall and hope the inspector passes it.
Mr-Glass Models & Products We Service in Ben Lomond
We service the full Mr-Glass product line in Ben Lomond. That includes the Frameless Shower Enclosure series – 10mm tempered, wall-to-wall and curbless configurations – the Semi-Frameless Sliding Shower Door line, Glass Railing & Balustrade systems, and Custom Mirrors & Medicine Cabinet glass. Our parts approach is simple: genuine Mr-Glass hinges, handles, sweeps, and channel when the original profile is still available; matching-tolerance aftermarket seals and brackets when OEM stock has been discontinued. We keep common profiles and hardware on hand so most Ben Lomond service calls don’t wait on a parts order.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Ben Lomond
What a Mr-Glass job costs in Ben Lomond depends on three things: whether the existing glass can be salvaged, how far out of plumb the walls are, and whether the work is a repair or a new build. Here are the ranges we quote across the 95005 service area:
| Mr-Glass Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Every estimate is line-itemed. We walk the site, check the framing, confirm what Mr-Glass hardware is still available, and quote what the work actually costs. Call (844) 681-3590 to schedule a free estimate – no charge to have us look.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well, including Mr-Glass in Mount Hermon just down the road. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Ben Lomond
A chip at the hinge point means the tempered panel is compromised and should be replaced – you can’t safely repair structural glass once the edge is fractured. What you don’t need to do is replace the entire enclosure. We quote panel replacement separately, and if the rest of the glass and hardware are sound, we rehang what’s there. Call (844) 681-3590 and we’ll tell you straight which it is.
No. We’re an independent general contractor with years of hands-on experience installing and servicing Mr-Glass products in Santa Cruz Mountains homes. We’re not authorized, endorsed, or warranty-backed by Mr-Glass. What that means for you: when we recommend a repair over a replacement, there’s no manufacturer incentive pushing us to sell you new glass.
When the original profile is still available, yes. We source genuine Mr-Glass hinges, handles, sweeps, and channel. When OEM parts are discontinued, we use matching-tolerance aftermarket seals and brackets that meet the same spec. We’ll always tell you which you’re getting before we order.
Most bracket resets, sweep replacements, and rehangs are done in a single visit. If we need to order a discontinued profile or cut a replacement panel, it’s typically a week to schedule the reinstall. CZU rebuild templating jobs obviously take longer because we’re working to new construction framing, not an existing opening. Call (844) 681-3590 for a realistic timeline on your specific project.
Ben Lomond’s work comes with mountain logistics: steep driveways, narrow access along Highway 9 and Bear Creek Road, and framing that’s rarely plumb on older cabins or fresh rebuilds. The glass itself costs the same, but the labor to template, shim, and seal correctly on out-of-level bathrooms runs higher. That’s the honest answer. Call (844) 681-3590 and we’ll quote your actual site, not an average.
Service Areas Near Ben Lomond
Our Mr-Glass sales & service covers Ben Lomond service area and the surrounding Santa Cruz Mountains communities. We also run crews to Mr-Glass service in Bonny Doon for coastal hillside homes and Mr-Glass service in Communications Hill for newer slope-built subdivisions. If you’re in Felton, Boulder Creek, or Brookdale, you’re within our daily route.
Book Your Mr-Glass Service in Ben Lomond Today
If your Mr-Glass enclosure is leaking, chipped, or pulling off the wall, don’t wait for the next rainstorm to find out how bad it’s gotten. Call (844) 681-3590 to schedule your free estimate. We’ll come out, check the framing, and tell you exactly what needs fixing and what doesn’t.
Written by Noel Carbajal, Owner at Framework Contractors, serving Ben Lomond since our first CZU rebuild. Build it right the first time – the second time costs twice as much and nobody’s happy.