Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Millbrae, CA | Framework Contractors
We provide independent CWS cabinetry and countertop installation, service, and repair across Millbrae. The thing that makes our CWS work different here is that we’re fitting these cabinets and surfaces into 1950s tract homes with out-of-level floors, narrow side setbacks, and fog-driven moisture problems. Framework Contractors is not authorized by or affiliated with CWS, which matters because we give you straight repair-versus-replace advice without a manufacturer’s interests shaping the recommendation. Call (844) 681-3590 for a free estimate in Millbrae.
Why Millbrae Residents Choose Us for CWS Service
We’ve spent the better part of three decades building and remodeling across the Bay Area, and Millbrae’s housing stock rewards crews that have seen what fog and sixty-year-old framing do to cabinetry. Noel Carbajal grew up working weekends with his uncle, patching stucco and reroofing porches, and he still runs a crew the same way: measure twice, level everything, and don’t hide a problem behind a shim. Our installers work with CWS Woodhouse and Sedona lines regularly, so we know which door fronts tolerate Millbrae’s damp air and which wall assemblies need sealing before a cabinet box goes up.
We also use genuine CWS parts for hinges, drawer slides, and door fronts whenever they’re available, and quality aftermarket hardware when a factory part is discontinued or back-ordered for weeks. We tell you plainly which it is, and we don’t upsell a full replacement when a door re-alignment or a new hinge does the job. You get one crew, one point of contact, and a written line-item quote before any work starts.
Styles & brands we work with







Common CWS Construction Problems We Solve in Millbrae
- Swollen upper cabinet boxes on south and west kitchen walls. Millbrae sits in the fog zone near SFO, and many stucco-sided 1950s homes wick moisture into exterior wall cavities. CWS particleboard carcasses absorb that dampness, the back panels swell, and doors stop closing true. We pull the affected boxes, seal the wall assembly, and reinstall or replace with a proper moisture barrier behind the run.
- Cabinet runs templated over out-of-level original subfloors. Flatlands tract homes from the 1940s and 1950s rarely have level floors after seventy years. When a CWS run goes down without correcting the deck, you see a visible reveal at the top and toe-kick gaps that squeak. We level the deck first, then template the run.
- CWS quartz seam failures over settled counter decks. Pop-top additions and second-story remodels in Millbrae settle slightly after framing, and a non-flat deck under a quartz slab opens seams. We re-level with a proper substrate, re-template the slab, and re-seam it. The fix usually beats a new countertop.
- Frameless shower glass swinging into the fixture in older baths. Millbrae bathrooms from the mid-century era often have stud walls out of plumb by half an inch or more. A CWS frameless enclosure hung on that wall binds at the hinge and drifts. We correct the blocking behind the wall before re-hanging the glass.
- Fog-driven spotting on CWS shower hardware and glass. Unvented bathrooms near the coast push humid air onto every surface. We re-seal the enclosure, adjust ventilation where feasible, and swap degraded seals before they fail completely.
CWS Service in Millbrae: What Local Conditions Mean for Your Equipment
Here’s the thing a generic CWS page won’t tell you about Millbrae. The flatlands east of El Camino Real are essentially built out at 1950s tract density, which means every kitchen remodel is a squeeze. Side setbacks are narrow, original plumbing walls don’t move without a fight, and window openings from 1955 are exactly where they are. A CWS kitchen here almost always gets templated and assembled in a tight footprint where cabinet runs must clear those existing walls and windows. That means standard box sizes rarely slide right in without modification. We trim fillers, build custom end panels, and adjust stile widths so the run fits the room as it actually is, not as a spec sheet assumes it to be. On the western hillside parcels closer to the Santa Cruz Mountains foothills, slope and drainage issues add retaining-wall work to the job, but the cabinetry constraint is the same: CWS lines built for standard openings need a crew that understands odd dimensions. That’s the work we do every week in Millbrae.
We got called to a 1950s stucco tract home near Broadway not long ago. The homeowner’s CWS Woodhouse uppers were swollen at the back panel from fog-driven moisture wicking through the south wall, and a quartz seam had opened over an out-of-level counter deck. We replaced the affected boxes, re-leveled the deck with a proper substrate, re-templated the CWS quartz, and sealed the wall assembly. The doors closed true again. In the bath, a frameless CWS glass enclosure was re-hung after we corrected the out-of-plumb wall blocking behind it. That’s a normal Tuesday for us.
CWS Models & Products We Service in Millbrae
We install, repair, and reface CWS Woodhouse and Sedona shaker cabinet lines, CWS quartz and granite countertop slabs, CWS semi-custom bath vanities and linen cabinets, and CWS frameless glass shower enclosures. For Millbrae turnaround, we keep common CWS hinge and slide hardware on hand, and we can source door fronts and panel matches through our local suppliers within a few days rather than weeks. When a box or counter deck is past saving, we say so and show you the numbers for replacement instead of re-facing. CWS sales & service across all these lines are handled by our crews, not subcontracted out.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Millbrae
What you’ll pay depends on scope, wall condition, and whether we’re repairing or replacing. Here are the ranges we typically see across Millbrae projects:
| Service | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Home Addition | $45,000 – $130,000 |
A free estimate in Millbrae includes a site check, a written line-item quote, and a straight answer on whether your CWS components should be repaired or replaced. Call (844) 681-3590 to schedule yours.
Serving Millbrae, CA — Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Millbrae
Yes. We level the deck first, then template the CWS run to the corrected surface, so doors align and toe-kicks sit flush. Millbrae’s original subfloors run out of level by half an inch or more in many tract homes, and skipping that step is why some kitchen remodels look off from day one. Call (844) 681-3590 and we’ll take a look at your floor before quoting.
Fog-driven moisture wicks through stucco siding on south- and west-facing walls, and the particleboard back panels absorb it over years. Millbrae’s damp marine air makes this common. We remove the affected boxes, seal the wall assembly, and reinstall or replace with a moisture barrier behind the run.
Yes. Pop-top framing settles slightly after construction, and a non-flat deck opens quartz seams. We re-level the deck with a proper substrate, re-template the CWS slab, and re-seam it. The repair usually costs far less than a new slab, and we’ll tell you which route makes sense. Call (844) 681-3590 for a free estimate.
Yes, and we correct the out-of-plumb wall blocking behind it before re-hanging the enclosure. Older Millbrae bath walls are rarely straight, and hanging new glass on a crooked wall just moves the problem to the hinge. We do it right so the door swings true.
No. Framework Contractors is an independent CWS service provider. We use genuine CWS parts when available, but we are not manufacturer-authorized and any warranty claim goes through the manufacturer, not us. What we give you instead is honest repair-versus-replace guidance with no interest in selling you a new run unless yours is genuinely done. Call (844) 681-3590 for a straight answer.
Service Areas Near Millbrae
We serve homes throughout Millbrae service area and the surrounding Peninsula communities. Our crews also take CWS work in CWS service in Moss Beach and CWS service in Montara, where the coastal fog creates many of the same moisture conditions we see in Millbrae’s older homes. If you’re anywhere along the 94030 corridor, reach out and we’ll confirm coverage.
Book Your CWS Service in Millbrae Today
If your CWS cabinets, countertops, or shower glass need repair or you’re planning a full remodel in Millbrae, call (844) 681-3590. Estimates are free, and we’ll give you a written quote before any work begins.
Written by Noel Carbajal, Owner at Framework Contractors, serving Millbrae since 1998.