CGI Construction in Tiburon, CA

CGI Construction in Tiburon, CA | Framework Contractors

We provide independent CGI cabinet and countertop service across Tiburon, from full kitchen remodels to refacing and hardware repair. The thing that makes our CGI work different here is simple: we’ve spent years installing and correcting CGI cabinetry on sloped Marin hillside lots, where a kitchen lives or dies by how the foundation moves beneath it. We’re an independent contractor, not affiliated with or endorsed by CGI. Call (844) 681-3590 for a free estimate.

Call (844) 681-3590

Why Tiburon Residents Choose Us for CGI Service

Most cabinet installers in Tiburon know how to hang boxes on a flat floor. The homes here don’t often have flat floors. We learned CGI construction the hard way, on hillside streets where a downhill foundation wall is doing double duty as a retaining structure and the winter water table turns any excavation into a shoring job before the first base cabinet lands. For a different hillside challenge, see our Sausalito CGI service. That’s the difference. Noel Carbajal, our owner, grew up patching stucco and reroofing porches with his uncle before he was old enough to drive, then spent decades building and remodeling across Orange County. He brought that same mindset here: understand the ground first, then the cabinets.

We’re independent and intend to stay that way. That means when a CGI product is the right call for your kitchen, we’ll say so. When it isn’t, we’ll say that too, and tell you what we’d use instead. Don’t expect a sales pitch dressed up as advice.

We also keep the parts conversation straight. We use CGI OEM hinges, glides, and touch-up finishes where they exist. When the OEM part is discontinued or was the weak link in the first place, we switch to quality aftermarket hardware like Blum-style soft-close glides rather than pretending a bad spec was good. You’ll know which is which before we start.

One contractor. Every system. Our CGI sales & service work sits inside a full-scope general contracting operation, which matters when a cabinet job turns out to be a floor-leveling job or a drainage correction.

Common CGI Construction Problems We Solve in Tiburon

Here are the failures we actually see on Tiburon hillsides, not the generic list:

• Moisture-wicked toe kicks and sink bases. Particleboard and MDF-box RTA cabinets soak up fog-season dampness when a hillside kitchen’s downhill wall stays wet for months. By the time you see swelling, the box is usually done. We check drainage and under-cabinet airflow before we quote a replacement.
• Drawer glides and hinges binding as the floor deflects. A cantilevered or pier-supported floor moves through the seasons on a steep lot. Hardware that worked in August binds in February. We often re-level the cabinet run and upgrade to soft-close glides that tolerate more movement.
• Door and drawer faces delaminating on exterior walls. When a kitchen vent or bath fan dumps humid air against an under-insulated exterior wall, CGI veneers and paint-grade faces break down. It looks like a product failure. It’s usually a ventilation failure wearing a cabinet problem as a costume.
• Stressed countertop seams and cabinet frames after winter rain. Slab-on-grade and cripple-wall foundations shift when saturated hillside soil expands. Seams open, frames rack. We fix the cabinet, but we also flag the foundation and drainage so it doesn’t happen again next season.
• Rotted or racked boxes under a sink that’s seen decades of slow leaks. Older CGI lines with particleboard boxes don’t survive repeated water exposure. If the box is swollen, replacement is the honest answer. If it’s sound, refacing and re-hardwaring usually saves thousands.

CGI Service in Tiburon: What Local Conditions Mean for Your Equipment

On the hillside streets above downtown Tiburon, many homes have a downhill foundation wall that also holds the road or a neighbor’s slope. Before we set a single CGI base cabinet, we often have to shore, dewater, and confirm the floor plane. Winter groundwater doesn’t care about your cabinet schedule. It turns any kitchen excavation into a dewatering and shoring problem before the first footing is poured, and it’s the reason we quote hillside kitchen work differently than we would a flat Marin lot in Corte Madera or San Rafael. We’ve handled similar conditions through our Marin City CGI service. The grading, drainage, and shoring costs show up in the estimate up front, not as a surprise change order later. If a contractor quotes a Tiburon hillside kitchen without asking about your foundation wall, drainage, or retaining structures, that’s your first sign they haven’t done this before. Build it right the first time. The second time costs twice as much and nobody’s happy.

We opened up a kitchen on a hillside street above downtown and found the downhill wall holding the neighbor’s slope, with the winter water table already seeping into the excavation. We shored and dewatered, re-leveled the floor plane, then installed CGI plywood-box Shaker cabinets with upgraded soft-close glides and a quartz top. The boxes sat true and the drawers stayed smooth through the wet season. That’s the job, and it’s not one you can do from a showroom.

CGI Models & Products We Service in Tiburon

We service and install the CGI Ready-to-Assemble all-plywood cabinet lines and the pre-assembled plywood-box series. That covers the Shaker and flat-panel door styles, plus the quartz and granite countertop programs. When a homeowner asks whether RTA or pre-assembled makes sense for their hillside kitchen, the answer usually comes down to access. Tight fire-road turns and narrow Tiburon driveways can make pre-assembled cabinets harder to stage, while RTA boxes go in flat and get assembled on site. We stock common CGI hinges, glides, and touch-up finishes locally so turnaround stays quick, and we’ll tell you if a part is worth waiting on OEM or if a Blum-style aftermarket glide will outperform it. We cover the full Tiburon service area, including the 94920 ZIP.

CGI Service Pricing in Tiburon

FAQs – CGI Construction in Tiburon

Can you install CGI cabinets in a Tiburon hillside kitchen where the floor isn’t perfectly level?

Yes. We shim, plane, and in many cases re-level the cabinet run itself before installation, but we also check whether the floor’s out-of-level because of seasonal movement or a structural problem. If it’s structural, we address that first, then set the cabinets true. Call (844) 681-3590 for a site assessment and free estimate.

My CGI cabinet drawers stick and the doors don’t close flush. Is that the cabinets or the house?

In Tiburon, it’s usually the house. Pier-supported and cantilevered floors move seasonally as hillside soil expands and contracts with winter rain. Hardware that’s slightly out of tolerance binds when the floor deflects. We fix both: re-level the cabinet run and upgrade to soft-close glides that tolerate more movement.

Do you replace CGI particleboard cabinets or just reface them?

Depends on where the failure is. If the boxes are sound and only the door fronts or hardware have failed, we reface and re-hardware rather than tear out, which saves thousands. If the box material is swollen particleboard from moisture, replacement is the honest answer, and we’ll say so plainly.

What CGI countertop material makes sense for a kitchen on a moving hillside foundation?

Quartz handles slight seasonal movement better than natural granite because it’s more dimensionally stable and less likely to crack at a seam. That said, no countertop fixes a foundation problem. We address the structure first, then the top. Call (844) 681-3590 for an honest material recommendation based on your specific lot.

Will you pull the permit for a CGI kitchen remodel in Tiburon, and does the hillside grading rule apply?

We pull permits on every job that requires one, and yes, on a sloped Tiburon lot the grading and drainage rules typically apply even when the work is inside the kitchen footprint. The town’s review looks at impervious surfaces and retaining structures, so we file accordingly. Your estimate includes permit time and fees.

Service Areas Near Tiburon

We serve Tiburon and the surrounding Marin corridor, including CGI service in Belvedere and CGI service in Mead Valley. Homeowners in those areas face many of the same hillside and drainage conditions, so the same prep-first approach applies.

Book Your CGI Service in Tiburon Today

If your CGI cabinets are binding, swelling, or just showing their age on a Tiburon hillside, call (844) 681-3590 to schedule a free estimate. We’ll walk your kitchen, check the floor plane and drainage, and give you a line-itemed quote that tells you exactly what the hillside requires. Built to spec, not to shortcut.

Written by Noel Carbajal, Owner at Framework Contractors, serving Tiburon and the greater Marin County area.