Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Redwood Shores, CA | Framework Contractors
We provide independent CGI cabinetry service across Redwood Shores, and we’ve been doing it long enough to know exactly what the bayfront does to these products. The short version: salt air corrodes hinges, engineered fill settles and racks cabinet boxes out of square, and the high water table means slab-on-grade homes have moisture problems that generic cabinet installs won’t survive. If you’re dealing with sticking CGI drawers, peeling thermofoil, or doors that won’t close flush, call (844) 681-3590 for a free estimate.
Why Redwood Shores Residents Choose Us for CGI Service
We’ve worked with CGI in San Carlos and Redwood Shores for over a decade, learning how these products handle the bayfront’s salt air and engineered-fill soils. Our crews know the specific hinge, drawer, and finish failure points that show up in CGI kitchens here, and we stock the OEM and aftermarket parts that actually fix them. Noel Carbajal, our owner, has spent the better part of three decades building and remodeling across California, and he’s been clear with us from day one: “Build it right the first time – the second time costs twice as much and nobody’s happy.” That’s the standard we bring to every CGI job, whether it’s a Hudson Way kitchen, a Shorebird Island vanity, or a full remodel near the lagoons.
We’re an independent CGI sales & service provider. We’re not manufacturer-affiliated, and we don’t pretend to be. That independence means we recommend what’s actually right for your home, not what a factory rep tells us to push.
Styles & brands we work with
Common CGI Construction Problems We Solve in Redwood Shores
- Corroded hinges and drawer slides. Salt-laden bay air does a number on CGI hardware, especially on exterior walls where fog-driven moisture is constant. Hinges bind, slides grind, and eventually drawers refuse to open smoothly. We replace them with OEM CGI hardware for critical moving parts.
- Racked cabinet boxes from settlement. Engineered-fill settlement racks cabinet boxes out of square, leading to doors that won’t close flush and drawers that stick. This is particularly common in homes near the lagoons and on Redwood Shores’ original marsh landfill. We level, shim, and scribe to restore fit.
- Peeling thermofoil finishes. CGI’s thermofoil finishes can peel or bubble at edges in high-humidity kitchens when the range hood doesn’t vent properly or the room lacks adequate exhaust. Fog season makes it worse. We’ll tell you honestly if the door is worth refacing or if replacement makes more sense.
- Swollen particleboard cores. Particleboard core cabinets swell and crumble at the toe kick and sink base when slow leaks or condensation go unnoticed in slab-on-grade homes with high water tables. Once the core is compromised, we recommend replacement, not patchwork.
- Sticking doors on settled floors. In homes near the bay edge, original CGI installs from the 1980s and 1990s often sit on floors that have moved a half inch or more. Hinges get stressed, doors ghost-open or won’t latch. We correct the installation, not just the symptom.
CGI Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores sits on engineered fill and bayfront landfill, so any CGI cabinet or vanity install on a slab must account for settlement that racks boxes out of square. That’s the thing generic guides miss. We check with a level and moisture meter before ordering a single door, because what fits in the showroom won’t fit a settled floor here. On a recent job in the Lakeshore neighborhood, our crew installed a full CGI Timberline kitchen with our Home Remodeling in Redwood Shores team for a homeowner who’d been living with sticking drawers for years. We found the slab had settled nearly an inch across the run, so we shimmed and scribed every cabinet to level, then replaced the corroded hinges with OEM CGI parts. The homeowner said it was the first time the drawers closed smoothly since the house was built.
That experience shapes how we approach every CGI job in Redwood Shores and nearby communities like CGI in San Mateo. The neighborhood’s drained-marsh history, starting in the 1960s, means dewatering, soil stability, and settlement are front-of-mind on virtually every project. A cabinet install isn’t cosmetic work here. It’s a structural adjustment.
CGI Models & Products We Service in Redwood Shores
We service the full CGI Cabinetry lineup: York Series, Timberline Series, Cottage Series, and Metro Series. Each has its own quirks. Timberline doors are heavier, so hinge wear shows sooner in humid kitchens. Cottage Series painted finishes need different touch-up work than York’s stained wood. We use OEM CGI hardware for critical moving parts like hinges and slides, but for cosmetic and non-structural components we source quality aftermarket equivalents that meet or exceed original specs at lower cost. We repair when the box is sound. If swelling or delamination has compromised the core, we say so and recommend replacement.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Redwood Shores
Here’s what CGI work typically runs in Redwood Shores. Your exact quote depends on scope, whether we’re repairing or replacing, and how much settlement correction the cabinets need.
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Countertop Installation | $2,000 – $6,500 |
The variables that move your CGI project price: how far out of square the floor has settled, how many corroded hinges and slides need replacement, and whether we’re working with the original boxes or installing new ones. Call (844) 681-3590 to schedule a free estimate. We’ll check the level, check the moisture, and give you a written line-item quote before any work starts.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well, and we also serve as a Redwood Shores General Contractor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Redwood Shores
Engineered fill settles unevenly over decades, which racks cabinet boxes out of square and causes doors and drawers to bind. Before we install new CGI cabinets in Redwood Shores, we level-check the floor and shim or scribe the boxes so they sit true regardless of what the slab has done underneath.
Yes. For the Cottage Series painted finishes especially, we can color-match and replicate glazing on a new vanity to blend with your existing CGI kitchen cabinets. For wood-stained finishes like York or Timberline, we try to match from the original CGI finish schedule. Bring us a door sample and we’ll tell you how close we can get.
Door and drawer front replacement typically falls within our cabinet installation range of $4,000 – $13,000 depending on count and finish. Replacing fronts costs less than a full remodel when the boxes are still sound, which is exactly why we check the cores before we quote. Call (844) 681-3590 for an exact number.
We replace all corroded moving hardware with OEM CGI hinges and slides, and we’ll coat non-visible metal components with a marine-grade corrosion inhibitor where the original finish is gone. In homes right on the lagoons, we often recommend sealed-bearing slides that hold up better than the original ones.
Cabinet installation and refacing don’t require a permit, but if your project expands into changes that involve plumbing, electrical, or structural wall work such as a kitchen remodel that moves the sink or opens a wall, the city of Redwood City will want plans. We handle permit pulls and inspections on those jobs. Call (844) 681-3590 and we’ll tell you whether your project triggers review.
Service Areas Near Redwood Shores
We’re on the road all over the Peninsula. Beyond our regular Redwood Shores service area, we handle CGI work in Belmont, Foster City, and neighboring streets around San Carlos and Redwood City. If your cabinets were installed decades ago and haven’t aged well, we’re close by.
Book Your CGI Service in Redwood Shores Today
Sticking drawers, corroded hinges, doors that won’t close. We see those every week in Redwood Shores. Call (844) 681-3590 to schedule your free estimate, and Noel or one of our crew leads will meet you at your kitchen with a level and a straight answer.
Written by Noel Carbajal, Owner at Framework Contractors, serving Redwood Shores and the Peninsula.