Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Ben Lomond, CA | Framework Contractors
We provide independent CGI cabinet installation, refacing, and repair across Ben Lomond and the Santa Cruz Mountains. What makes our CGI work different here comes down to this: most of Ben Lomond’s kitchens were never built for today’s fire code or today’s cabinet hardware. We retrofit CGI systems into older redwood cabins and CZU rebuilds where wall assemblies, foundation movement, and moisture levels don’t behave like a tract home in the valley. Call (844) 681-3590 for a free estimate.
Framework Contractors is not affiliated with or authorized by CGI. We’re an independent general contractor with crews who work almost exclusively with CGI cabinet and storage systems in the 95005 corridor. That focus means we know how CGI box construction, hinge geometry, and finish options hold up when a house sits on a slope off Bear Creek Road or gets hammered by winter rain under redwood canopy. If you’re planning a kitchen remodel, bathroom vanity swap, or full cabinet reface in Ben Lomond, we’re the crew that already knows your site conditions.
Why Ben Lomond Residents Choose Us for CGI Service
Most cabinet installers in the Santa Cruz Mountains treat CGI like any other box line. We don’t, because in Ben Lomond the details that seem minor in a showroom turn into callbacks six months later. A cabinet hung on a pier-and-beam floor that shifts two degrees after a wet winter will rack. A face frame installed tight against an uninsulated south wall will check in August. We plan for those realities before the first box comes off the truck.
Noel Carbajal, our owner, grew up patching stucco and reroofing porches with his uncle before he was old enough to drive, then studied Construction Technology at Santiago Canyon College. He’s spent the better part of three decades building and remodeling across California, and he’s the first to say this: “Build it right the first time – the second time costs twice as much and nobody’s happy.” In Ben Lomond, building it right means accounting for seismic wall assemblies, fire-rated sheathing, and foundation movement that most cabinet crews never think about.
We use CGI OEM replacement parts whenever available: hinges, slides, shelf pins, the hardware that keeps factory tolerances intact. When CGI hardware is obsolete, we source aftermarket equivalents that meet or exceed original spec. We’ll also give you a straight repair-versus-replace assessment. If the boxes are solid, new doors and hardware usually beat a full tear-out, and we’ll tell you that even when it means a smaller job for us.
Styles & brands we work with
Common CGI Construction Problems We Solve in Ben Lomond
- Racked doors and sticking drawers on pier-and-beam floors. Older Ben Lomond cabins shift with seasonal soil movement, and after a heavy rain season the foundation can move enough to throw cabinet geometry out of square. We realign boxes, shim for level, and reset hinges so doors close clean again.
- Dried-out face frames and joint separation from summer heat. Uninsulated mountain homes with sun-exposed south and west walls cook CGI cabinet boxes and face frames. We see finish checking and hairline separation where the afternoon sun hits hardest, and we repair or reface accordingly.
- Swollen or delaminating boxes from moisture. Ben Lomond homes shaded by redwoods stay damp longer, and roofs and gutters that never fully dry out can leak into cabinet runs. Standard MDF or particleboard boxes swell and delaminate fast. We replace damaged sections and address the moisture source so the problem doesn’t return.
- Corroded hinges and seized slides in damp kitchens. CGI’s older hardware doesn’t love Ben Lomond’s winter humidity. Doors sag, drawers bind, and in poorly ventilated kitchens or baths the hardware locks up entirely. We swap in new OEM or equivalent hardware and lubricate what’s salvageable.
- Out-of-square installs from sloped lots and nonconforming walls. Steep, narrow lots along Highway 9 and Bear Creek Road mean floors aren’t always level and walls aren’t always plumb. We’re used to scribing CGI cabinetry to fit those conditions instead of forcing it, which is the difference between a kitchen that looks right for a month and one that looks right for a decade.
CGI Service in Ben Lomond: What Local Conditions Mean for Your Equipment
Here’s what most contractors don’t tell you about installing cabinets in Ben Lomond: the CZU Lightning Complex rebuilds changed everything about how a kitchen goes together. Homes being rebuilt now must meet Chapter 7A ignition-resistant standards, which means upgraded wall assemblies, thicker insulation, and fire-rated sheathing that the original cabins never had. For CGI cabinet installation, that changes how we fasten and seal every box. On a rebuild off Bear Creek Road, our crew installed CGI shaker-style cabinets with soft-close hardware in a new home built to Chapter 7A over a slab-on-grade with a tight, well-insulated envelope. No pier-and-beam movement, plumb walls, level floors. We used the OEM hinge system and sealed the cabinet backs against the new fire-rated drywall to prevent moisture wicking. It went smoothly because the new construction gave us conditions most older Ben Lomond cabins never will. That’s the exception, not the rule, but it shows what happens when the structure and the cabinetry are built to the same standard.
Compare that to a 1960s redwood cabin on a slope, where the floor sags half an inch over eight feet and the wall studs are 24 inches on center instead of 16. You can’t just hang a CGI cabinet run and call it done. You shim, you scribe, you anchor into framing where it actually exists, and you account for the fact that the house will keep moving. That’s the Ben Lomond difference, and it’s why generic installation advice from a valley contractor doesn’t transfer up here.
CGI Models & Products We Service in Ben Lomond
We install, reface, and repair the full CGI cabinetry line: base and wall cabinet lines, kitchen and bath cabinets, and CGI’s storage systems. Whether you’re doing a full kitchen remodel, a bathroom vanity installation, or a cabinet refacing job, we work with the same OEM hardware CGI built the boxes around. That matters in Ben Lomond, where a mismatched hinge or an off-spec drawer slide turns into a callback when the temperature swings or the house shifts.
We keep common CGI hardware and touch-up materials stocked locally so we’re not waiting on a supplier when a hinge fails or a finish needs matching. For full installs, we order direct and stage materials at your site, which helps when access off Highway 9 or Bear Creek Road means a delivery truck can’t just pull up to the door.
For broader context on the cabinetry and storage systems we service, see our CGI sales & service page, which covers the line in more depth across all our service areas.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Ben Lomond
What you’ll pay for CGI cabinet work in Ben Lomond depends on the scope, the condition of your existing structure, and how much prep the site needs. A sloped lot with poor truck access or walls that need blocking before cabinets can hang will add labor. A CZU rebuild with clean framing and level floors will often come in lower than a retrofit on a 60-year-old pier-and-beam cabin.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Those are the ranges we work within for Ben Lomond projects. A free estimate from us includes a site walk, measurements, and a written line-item quote so you know what you’re paying for before we start. Call (844) 681-3590 and we’ll get you on the schedule.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help. We also provide CGI in Lompico, along with service to Brookdale, Felton, and Mount Hermon.
FAQs – CGI Construction in Ben Lomond
Yes. On Chapter 7A rebuilds, fire-rated wall assemblies and sheathing change how we anchor, and on older homes with 24-inch stud spacing or nonconforming framing, we add blocking and use longer fasteners to hit real structure. Seismic movement in the Santa Cruz Mountains is a constant, and standard install clips don’t cut it here. Call (844) 681-3590 and we’ll assess your specific walls before quoting.
We level and scribe. Pier-and-beam floors move, and sloped lots mean the subfloor is rarely flat. We shim base cabinets to level, scribe to the floor’s actual contour, and anchor into solid framing rather than relying on the floor itself. It’s slower than a slab install, but it’s the only way the doors stay square when the ground shifts. Call (844) 681-3590 for an exact quote on your site.
Usually, yes. CGI’s finish lines are well documented, and we can match most stains, paints, and thermofoil finishes. Older cabinets that have sun-faded from years of afternoon exposure on a south wall may need a custom blend, which we source through our finishing partners. If you’re keeping part of an existing run and replacing the rest, we’ll tell you up front how close the match will be.
Most full kitchen cabinet installations take three to seven working days once materials are on site. Refacing runs faster, usually two to four days. Ben Lomond access can add time if we’re staging materials on a steep driveway or working around a narrow lot, but we’ll give you a schedule before we start. Call (844) 681-3590 and we’ll walk you through the timeline for your project.
Yes, we stand behind our installation work and the materials we install. CGI’s manufacturer warranty covers the product, and our workmanship warranty covers how we put it in. We’ll give you the details in writing before the job starts, including what’s covered and for how long.
Service Areas Near Ben Lomond
Beyond Ben Lomond proper, our crews cover the surrounding mountain communities and the valley below. You’ll find us working in CGI service in Bonny Doon for coastal mountain homes, down around CGI service in Communications Hill for newer construction, and across the broader Ben Lomond service area including Santa Ana, Tustin, Orange, North Tustin, Garden Grove, and Fountain Valley.
Book Your CGI Service in Ben Lomond Today
If your Ben Lomond kitchen needs CGI cabinets installed, refaced, or repaired, call (844) 681-3590. We’ll schedule a free estimate, look at your site, and give you a written quote. One contractor, every system, built to spec, not to shortcut.
Written by Noel Carbajal, Owner at Framework Contractors, serving Ben Lomond and the Santa Cruz Mountains for over 25 years.