Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Aptos Hills-Larkin Valley, CA | Framework Contractors
We provide independent CGI cabinetry and quartz surface installation, repair, and full kitchen remodeling across Aptos Hills-Larkin Valley. This is not a factory-authorized service arrangement. What makes our CGI work different here is that we’ve spent years installing and troubleshooting these cabinets on hillside properties where slope-settled floors and owner-built additions mean the install dictates the outcome more than the cabinetry itself. Call (844) 681-3590 to talk through your project.
Why Aptos Hills-Larkin Valley Residents Choose Us for CGI Service
We’re an independent contractor, which matters more than people expect. We’re not tied to a dealer program, so we can pair CGI boxes with whatever the job actually calls for: Cambria or Silestone tops, KraftMaid-format fillers when a wall is out of square, custom shims when a floor isn’t level. We’ve installed CGI Euro-style frameless cabinetry, shaker and flat-slab door lines, and all-plywood box series in kitchens from Larkin Valley Road up through the hills. Noel Carbajal, our owner, grew up learning stucco and roofing from his uncle before he could drive, and he’s spent about three decades in framing, concrete, and finish work since. That background matters when a CGI cabinet run has to hold square across a floor that slopes an inch in eight feet. We also handle CGI sales & service with the same independent, no-dealer-push approach.
Styles & brands we work with
Common CGI Construction Problems We Solve in Aptos Hills-Larkin Valley
- Thermofoil and laminate door skins peeling at the bottom edges. Aptos Hills-Larkin Valley sits in a fog belt. Summer fog and winter rain swing humidity hard, and thermofoil doors on CGI cabinets take the worst of it at the bottom edge, where moisture collects. We strip, prep, and refinish where the MDF core is sound, and replace doors where it isn’t.
- Frameless boxes racking out of square on slope-settled hillside floors. A 1960s ranch addition with a subfloor that was never leveled will twist a frameless cabinet carcass over time. Doors stop aligning, drawers bind. On a hillside floor, this is a replace, not a repair: new doors on a failing carcass just moves the problem.
- Particleboard-core boxes swelling around sink bases and dishwasher bays. Older drainage details on hillside and rural properties in the valley let moisture linger. We see CGI particleboard boxes crumble at the sink base where a slow leak went unnoticed. We replace with all-plywood boxes when the run warrants it.
- Soft-close hinges and drawer glides failing after years of overloading. Owner-built additions in Aptos Hills-Larkin Valley often lack proper stud anchoring behind pantry runs. Cabinets pull loose, glides bind, hinges fail under weight they were never anchored to handle. We re-anchor and replace hardware as a set.
- Quartz counters cracking at overhangs on out-of-level island bases. CGI quartz-topped islands need a flat, level base. A hillside floor that drifts over time transfers stress into the stone, and the overhang is where it gives first. We level the base before stone goes down.
CGI Service in Aptos Hills-Larkin Valley: What Local Conditions Mean for Your Equipment
Aptos Hills-Larkin Valley is unincorporated WUI, and a large share of the current construction here is post-CZU rebuild and Chapter 7A hardening. That shapes CGI in Day Valley and other nearby areas differently than it does here. A kitchen or bath cabinet package often has to be sequenced around defensible-space and brush-clearance inspection sign-offs that Santa Cruz County runs on its own calendar. Finish carpentry can sit waiting on a clearance inspection rather than on the cabinets themselves. We plan CGI cabinet installs around that county timeline from day one, so the quartz template isn’t cut days before a site inspection happens, and nobody’s storing finished cabinet runs in a garage while brush clearance gets sorted out. That one fact changes the whole schedule, and most contractors working the valley learn it the hard way.
CGI Models & Products We Service in Aptos Hills-Larkin Valley
We service CGI Euro-style frameless full-overlay cabinetry, shaker and flat-slab door lines in painted and thermofoil finishes, CGI quartz-topped vanity and island packages, and the CGI all-plywood box cabinet series built for humid coastal installs. When CGI OEM hinges, glides, and touch-up materials are still available, we use them. When they’re discontinued and the box is sound, we match quality aftermarket hardware: Blum-format hinges, full-extension glides, the parts that keep a kitchen functional without a full replacement. That part-stocking approach keeps our turnaround faster than ordering through a dealer chain, whether you need CGI service in Aptos or here in the valley.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Aptos Hills-Larkin Valley
Every CGI kitchen here is different because every hillside floor is different. What looks like a straightforward cabinet replacement can become a leveling job once we pull the old boxes. What looks like a countertop swap can turn into base reinforcement. Here’s where our pricing lands across the valley:
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
A free estimate means we walk the floor, check the grade, look at the existing boxes, and write a line-item quote. No change orders after the fact. Call (844) 681-3590 to get on the schedule.
Serving Aptos Hills-Larkin Valley, CA — Our Local Coverage Area
We’re our General Contractor in Aptos Hills-Larkin Valley and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Aptos Hills-Larkin Valley
In Aptos Hills-Larkin Valley, it’s usually both factors stacked. The fog-belt humidity cycle stresses thermofoil door skins, and post-CZU rebuilds sometimes get rushed through finishing before the interior has fully dried. We can assess whether the peeling is a material defect worth pursuing through the manufacturer or a moisture-driven failure better handled as a replacement door order. Call (844) 681-3590 and we’ll look at the doors in person.
Yes, more than on flat lots. A hillside floor that has settled over decades will rack a frameless CGI box out of square. We level, shim, and scribe every base box to the actual floor before tops are templated, then re-hang doors so reveals stay even across the grade change. Skipping that step is how cabinet runs fail early.
Potentially, if your project is part of a post-CZU rebuild or sits on a property with active brush-clearance requirements in unincorporated WUI. Santa Cruz County runs clearance inspections on its own schedule, and a finish-carpentry phase can sit waiting on that sign-off. We sequence the CGI install around the county timeline rather than against it. Call (844) 681-3590 to talk through your specific site.
It affects the plumbing rough-in more than the cabinets themselves, but it does shape the demo and reinstall order. Well systems often mean lower water pressure, and septic placement can constrain sink basin drain routing. We coordinate the cabinet set so the plumbing gets done cleanly, whether it’s a new install or CGI repair in Rio Del Mar properties with similar constraints, without butchering the back panel of a new CGI box to make a drain fit.
We can match the door style and finish, yes. The harder issue with unpermitted owner-built additions in Aptos Hills-Larkin Valley is that the wall framing and floor under them were never inspected, and stud anchoring is often inconsistent. We anchor properly before hanging new runs. Call (844) 681-3590 and we’ll tell you what’s workable.
Service Areas Near Aptos Hills-Larkin Valley
We also provide CGI service in La Selva Beach and Corralitos, as well as the broader Santa Cruz County corridor. If you’re in the valley or just up the grade, our crew covers the full Aptos Hills-Larkin Valley service area.
Book Your CGI Service in Aptos Hills-Larkin Valley Today
Build it right the first time. The second time costs twice as much and nobody’s happy. Call (844) 681-3590 for a free CGI estimate in Aptos Hills-Larkin Valley, and we’ll walk your floor before we quote a single cabinet.
Written by Noel Carbajal, Owner at Framework Contractors, serving Aptos Hills-Larkin Valley since 1995.