Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Santa Ana, CA | Framework Contractors
We provide independent CGI cabinet and quartz installation, refacing, and repair across Santa Ana, and we also offer our Home Remodeling in Santa Ana. The thing that makes our CGI work different here is simple: we’ve done it in hundreds of this city’s older bungalows and legalized garage conversions, where walls aren’t plumb and slabs aren’t level, and we know exactly how CGI boxes and slabs behave under those conditions. One contractor from demolition to final hardware. Call (844) 681-3590 for a free estimate.
Why Santa Ana Residents Choose Us for CGI Service
Noel Carbajal grew up in the Willard neighborhood of Santa Ana, helping his uncle patch stucco and reroof porches before he was old enough to drive. That’s the kind of history you can’t fake. When we show up to a CGI cabinet job in Wilshire Square or a kitchen remodel off Edinger, we already know the house type, the wall conditions, and how the Santa Ana winds are going to treat the finish — the kind of local knowledge you get from our General Contractor in Santa Ana. We’re an independent installer, not a manufacturer program partner, so we call it straight: if a CGI box is worth saving, we say so. If it’s water-swollen or racked beyond repair, we’ll tell you that too.
We fit CGI with genuine OEM hinges, glides, and matching door and drawer fronts. Where aftermarket levelers or fillers outperform OEM, we use those instead and tell you why. Your materials, our craftsmanship. For the full scope of CGI sales & service, one accountable team handles it.
Styles & brands we work with
Common CGI Construction Problems We Solve in Santa Ana
- Racked cabinets on out-of-plumb plaster walls. Frameless CGI boxes are precise. The 1920s-to-1960s lath-and-plaster walls in Santa Ana bungalows are not. When a box hangs against a wall that bows a half-inch over four feet, the doors drift and the drawers bind. We fur the wall to plumb first, then set the boxes. The cabinet was never the problem.
- Faded or micro-cracked painted finishes from heat and wind. South- and west-facing Santa Ana kitchens catch full afternoon sun, and fall Santa Ana wind events push dry heat against thin exterior walls. Painted CGI door and drawer fronts left in an under-insulated converted garage will fade and crack at the finish. We spec and install with those conditions in mind, and we reface when the original finish gives out.
- Quartz slab cracks at sink and cooktop cutouts. When a CGI quartz slab sits on a cabinet run that was shimmed over an uneven old floor and never re-leveled, the slab carries point loads at the cutouts. In Santa Ana’s pre-1960 homes, that uneven floor is the default. We level the subtop before the slab ever touches it.
- Soft-close hinge failure from humidity swings. Kitchens built over original cast-iron drains or converted garage slabs in Santa Ana see real humidity movement. Cheap aftermarket hinges fail early. OEM CGI hinges last, and we set the reveals so the full-overlay doors stay true through the seasons.
- Boxes installed in rooms never meant to be kitchens. Santa Ana has a huge number of legalized garage-to-living-space conversions. Those rooms have no moisture barrier under the slab and no real insulation in the walls. CGI boxes fastened directly to those walls without a vapor barrier will swell at the back panel. We address the room before we hang the cabinet.
CGI Service in Santa Ana: What Local Conditions Mean for Your Equipment
Because so many Santa Ana garage-to-living-space and rear-addition conversions were permitted after the city’s 2017-era ADU ordinance updates, a large share of CGI cabinet work here lands in rooms that were never designed as kitchens. We’re talking slabs with no moisture barrier and walls with no real insulation. That changes how we fasten and shim every box. A cabinet installed in a brand-new Irvine tract home goes against straight, dry framing, unlike a Fountain Valley CGI service might encounter. The same cabinet in a Santa Ana garage conversion sits over a slab that breathes moisture into the carcass and against a wall that moves with the weather. We fur, we plumb, we set a vapor barrier over the slab, and we level the base run with adjustable legs. That’s the only way CGI boxes stay true in this housing stock.
On a Wilshire Square bungalow off North Ross Street, we pulled a full CGI kitchen into a rear room the owners had legalized from an old garage conversion. The frameless boxes racked against the plaster until we furred the wall and set a vapor barrier over the slab. We re-leveled the base run, re-hung the full-overlay doors true, and set the CGI quartz with a leveled subtop so the sink cutout wasn’t carrying load. That job is what CGI work in Santa Ana actually looks like.
CGI Models & Products We Service in Santa Ana
We work across the CGI line: Euro-style frameless cabinetry with full-overlay doors and soft-close hardware, Shaker and raised-panel door styles in painted or stained finish, semi-custom boxes with plywood construction and adjustable shelving, and CGI quartz countertop slabs in marble-look and warm-vein patterns. For Santa Ana turnaround, we keep the common OEM hinges, glides, and levelers on hand or ordered ahead so a reface or hardware swap doesn’t stall your remodel. When a box is sound but the fronts are shot, we reface with matching CGI doors and drawer fronts. When the carcass is water-swollen or racked, we say replace. No gray areas. For neighboring coverage, see CGI service in Tustin.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Santa Ana
Here are the ranges we quote for CGI work in Santa Ana. Your exact number depends on the condition of your walls and floors, the size of the run, and whether we’re installing new, refacing, or doing a full kitchen with quartz.
| Service | Santa Ana Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Small & Partial Kitchen Remodels | $9,000 – $20,000 |
A free estimate from us includes a look at the wall and floor conditions that actually drive the price in Santa Ana homes. We don’t quote blind. Call (844) 681-3590 and we’ll come see your kitchen.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Santa Ana
Yes, and we do it regularly. The room will need a vapor barrier over the slab and the walls furred to plumb before any CGI box goes up. We handle that as part of the install, not as an extra surprise.
The cabinetry itself doesn’t trigger historic review. The window or roof change might, depending on the district and whether the Mills Act is in play. We coordinate the interior CGI work around whatever design review the exterior alteration requires. Call (844) 681-3590 if you’re juggling both.
They will if the subtop is not leveled first. That’s the leading cause of quartz failures at sink and cookout cutouts in this city’s pre-1960 homes. We set a leveled subtop before the slab goes down, and that prevents the point-load cracks everyone worries about.
If the box is sound, we reface with matching CGI doors, drawer fronts, and hardware. It’s faster and half the cost of new boxes. If the carcass is water-swollen or racked beyond adjustment, replace. We’ll show you which one you have.
No. We’re an independent installer and service provider. We fit genuine CGI OEM parts and honor the workmanship we perform, but we don’t hold a manufacturer authorization and we won’t pretend otherwise. That independence is why we can tell you when an aftermarket leveler is the better call.
Service Areas Near Santa Ana
We run CGI jobs across Santa Ana, Tustin, Orange, North Tustin, Garden Grove, and Fountain Valley. If you’re a few blocks over the city line, we’re still your crew. For Orange work specifically, see CGI service in Orange or Santa Ana service area for the full map.
Book Your CGI Service in Santa Ana Today
Build it right the first time. The second time costs twice as much and nobody’s happy. Call (844) 681-3590 for a free estimate on CGI cabinets, quartz, refacing, or a full Santa Ana kitchen remodel.
Written by Noel Carbajal, Owner at Framework Contractors, serving Santa Ana since his first stucco patch on a Willard porch.