Owens Corning Construction in Murrieta Hot Springs, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Construction in Murrieta Hot Springs, CA | Framework Contractors

If you’re looking for Owens Corning construction service in Murrieta Hot Springs, we’re the contractor to call. Framework Contractors installs and repairs Owens Corning roofing systems across southwestern Riverside County, and we know how their shingles actually hold up under inland heat, Santa Ana wind, and those short winter rain bursts that hammer the Murrieta Hot Springs Road corridor. We’re an independent contractor, not manufacturer-affiliated or authorized by Owens Corning, so our recommendations are based on what your roof deck and exposure actually need, not a brand mandate. Call (844) 681-3590 for a free estimate.

Call (844) 681-3590

Why Murrieta Hot Springs Residents Choose Us for Owens Corning Service

We’ve been roofing in Murrieta Hot Springs long enough to know which Owens Corning products fail first on which exposures, and we also handle Owens Corning repair in Murrieta when those products need attention. Duration shingles on a south-facing slope near the old resort area age differently than Oakridge on a shaded custom home off Calle Contento. That’s the kind of local knowledge you get when the same crew tears off, re-flashes, and rebuilds roofs here year after year.

Our owner, Noel Carbajal, learned roofing the hard way, on his uncle’s stucco and reroof jobs around Santa Ana before he was old enough to drive. Three decades later, his approach hasn’t changed: Owens Corning sales & service work gets spec’d from the deck up, not from a catalog photo. We carry genuine Owens Corning shingles, ridge caps, and underlayment matched to the existing system, and we only turn to quality aftermarket accessories like vents and edge metal where they outperform the OEM part for this specific exposure. You don’t have to chase down a specialty roofer who might know Owens Corning. We know it.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Owens Corning Construction Problems We Solve in Murrieta Hot Springs

  • Heat-aged sealant strip failure: On south- and west-facing Duration and Oakridge slopes, inland Riverside sun bakes shingles until the sealant strips lose their grip. Then Santa Ana winds lift the tabs, dust works underneath, and the field starts shedding granules. We see this constantly on homes along Murrieta Hot Springs Road that have zero tree cover. Repair usually means re-sealing or replacing the affected field before water gets to the deck.
  • Wind-scoured ridge caps and exposed starter courses: Detached shops, custom homes, and accessory structures on open ground get hit harder than anything in a tract. There’s no neighboring roofline to break the wind. Ridge caps lift, starter courses peel back, and the roof starts losing its first line of defense. We re-nail and re-seal caps to the uplift pattern that exposure demands, and we spec starter course replacement when it’s gone too far.
  • Underlayment failure on low-pitch addition and ADU roofs: This is a Murrieta Hot Springs classic. An addition or ADU gets tied in with minimal slope and standard felt instead of a proper Owens Corning underlayment system. The shingles look fine. The felt underneath doesn’t. We find rotten decking and staining at the tie-in before the shingles even show damage. On low pitch, the underlayment is the roof, and we spec Owens Corning WeatherGuard where the slope calls for it.
  • Storm-driven water intrusion at valleys and step flashing: Murrieta Hot Springs gets short, heavy winter rain bursts. Water hits graded pads, runs fast, and splashes back against fascia and lower courses. Valleys and step flashing that were never bedded properly start leaking within a season or two. We re-flash and re-bed these areas, and we match the shingle color to the existing Owens Corning field so the repair disappears.
  • Sun-dead fields that patching can’t save: Sometimes the whole field is baked, brittle, and shedding. That’s a tear-off, not a patch job. We’ll tell you straight when a re-roof beats chasing patches across a dead field, because we’ve seen too many Murrieta Hot Springs homeowners sink money into repairs that buy them two more summers.

Owens Corning Service in Murrieta Hot Springs: What Local Conditions Mean for Your Roof

Here’s what most roofing pages won’t tell you about Murrieta Hot Springs: this community is unincorporated Riverside County territory, not a city with its own building department. A re-roof here is permitted through the county, and on many larger lots along the Murrieta Hot Springs Road corridor, private wells and septic systems are still the norm. That means a roofing or addition project often gets sequenced around private utility coordination that a city-served tract lot never touches. Grading and drainage matter differently here too. A big storm can send runoff across a graded pad faster than a flat-lot builder expects, which is why we pay extra attention to valley flashing, drip edge, and fascia detail on every Owens Corning roof we install in Murrieta Hot Springs. If your lot drains toward the house, the roof has to carry that water away, not just shed it. That’s a local fact, not a brochure line.

On a semi-rural parcel off Murrieta Hot Springs Road, we tore off a sun-dead Owens Corning Oakridge roof on a detached shop that had lifted ridge caps from years of open-ground Santa Ana wind. We stripped to deck, replaced weathered fascia and step flashing, and rebuilt with Duration shingles and new ridge caps nailed to the uplift pattern the exposure demands before the county inspection. That’s the kind of work this area calls for.

Owens Corning Models & Products We Service in Murrieta Hot Springs

We install and repair the Owens Corning lines that actually hold up in Riverside County: Duration and Duration Cool for full sun exposure, Oakridge for cost-conscious re-roofs where the deck is sound, TruDefinition Duration Designer Colors when the HOA or the homeowner wants a richer palette, and WeatherGuard underlayment on low-pitch and critical-deck applications. We keep common Duration and Oakridge colors, ridge caps, and WeatherGuard rolls in local supply for faster Murrieta Hot Springs turnaround, and our Temecula Owens Corning service team can pull from the same stock when needed. When a repair calls for an OEM-matching shingle, we don’t order blind. We match to the existing field and verify the dye lot before the crew rolls.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Owens Corning Service Pricing in Murrieta Hot Springs

Roofing cost in Murrieta Hot Springs depends on tear-off versus overlay, roof pitch, deck condition, and how much flashing and edge detail the job requires. Homes along Murrieta Hot Springs Road with large lots and detached structures often have more linear feet of ridge, valley, and penetration flashing than a compact tract home, which moves the number. Here’s what to expect:

Service Typical Range in Murrieta Hot Springs
Roof Replacement $8,000 – $20,000
Roof Repair $400 – $1,800
Tile Roof Repair $600 – $2,500
Metal Roof Installation $15,000 – $40,000
Home Addition $45,000 – $130,000

Every estimate includes a deck inspection and a written line-item breakdown. No change orders unless we find something under the shingles that we all need to talk about first. Call (844) 681-3590 to schedule a free estimate.

Serving Murrieta Hot Springs, CA — Our Local Coverage Area

We’re based in the Murrieta Hot Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Owens Corning Construction in Murrieta Hot Springs

Service Areas Near Murrieta Hot Springs

We serve Murrieta Hot Springs and the surrounding southwestern Riverside County corridor, including Murrieta Hot Springs service area coverage for roofing, additions, and full-envelope remodeling. If you’re a little further out, we also provide Owens Corning service in Lakeview and Owens Corning service in Fallbrook.

Book Your Owens Corning Service in Murrieta Hot Springs Today

We’re taking roofing estimates across Murrieta Hot Springs this week. Call (844) 681-3590 and we’ll schedule a free estimate at a time that works for you.

Written by Noel Carbajal, Owner at Framework Contractors, serving Murrieta Hot Springs and southwestern Riverside County since 1998.

Need Construction help in Murrieta Hot Springs? Licensed & insured · Free in-home estimates response · free estimates
Call (844) 681-3590
Areas We Serve

Request a Free Estimate in Murrieta Hot Springs

Tell us what you need — Framework Contractors responds fast. No obligation.

By sending this request, you agree to the terms of our Privacy Policy and consent to being contacted by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch